[OpenSER-Users] About the opensip server.
gaoqiang.qian at nokia.com
gaoqiang.qian at nokia.com
Wed Jun 27 10:39:05 CEST 2007
I have installed the opensip server from
http://ftp.upjs.sk/pub/users/sal/Fedora/5/
openser-1.1.0-rhel3.0.i386.rpm
<http://ftp.upjs.sk/pub/users/sal/Fedora/5/openser-1.1.0-rhel3.0.i386.rp
m> cause my machine is FC 5. I start it by /usr/sbin/openser start.
I have /etc/openser, and when I cd /etc, and run ./openser.init start, I
got no such file or directory error. Can I also just run it by
/usr/sbin/openser start.
Besides, Do I need to change the defualt openser.cfg file to let the
openser act as both proxy and registart?
Thanks.
Qiang
________________________________
From: ext akkala.naidu at aricent.com
[mailto:akkala.naidu at aricent.com]
Sent: 27 June, 2007 11:23
To: Henning Westerholt
Cc: Qian Gaoqiang (Nokia-NRC/Helsinki); users at openser.org;
users-bounces at openser.org
Subject: Re: [OpenSER-Users] About the opensip server.
You can check with below command whether openser running or not.
ps -elf | grep openser
Try to start openser with ' cd openser home/ etc/' and
./openser.init start / stop / restart
Thanks and Regards,
Akkala Naidu Paidi
A R I C E N T
5th Floor, Sigma Block,
Sigma Soft Tech Park,
Bangalore - 69
Mobile: +91 9886645448
Office: +91 08041069295
Henning Westerholt <henning.westerholt at 1und1.de>
Sent by: users-bounces at openser.org
06/27/2007 01:06 PM
To
users at openser.org
cc
gaoqiang.qian at nokia.com
Subject
Re: [OpenSER-Users] About the opensip server.
On Montag, 25. Juni 2007, gaoqiang.qian at nokia.com wrote:
> > Hi,
> > I am working in Nokia and now response for setup a openser
sip server
> > providing sip proxy and registrar for one of our project.
After I have
> > install the openser Sip server by following all the steps
from CVS
> > installation guide. When I start the sip server with openser
start
> > command, I always got:
> > 'openser' start: /etc/init.d/openser
> > Openser failed to start
> > Strating open sip router:
> > Listen on
> > Udp:
> > ...
> > Aliases:
> > Tcp:
> > ...
> > It seems the starting is failed. So could you tell me what
could be
> > the reason? Or could you please tell me is there someway I
can test if
> > my openser is running now?
Hello,
look into the system log to get a hint why the server don't
start. Increase
the debug level in the configuration to get more informations.
You'll get logmessages if the server is up and responding to
queries.
Furthermore look at the tools 'sipp' or 'sipsak' on how to test
a sip server.
You'll find more informations about this in the list archives,
as this was
already discussed many times.
Cheers,
Henning
_______________________________________________
Users mailing list
Users at openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
*********************** Aricent-Restricted
***********************
"DISCLAIMER: This message is proprietary to Aricent and is intended
solely for the use of
the individual to whom it is addressed. It may contain privileged or
confidential information and should not be
circulated or used for any purpose other than for what it is intended.
If you have received this message in error,
please notify the originator immediately. If you are not the intended
recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of
this message. Aricent accepts no responsibility for
loss or damage arising from the use of the information transmitted by
this email including damage from virus."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20070627/440c5f97/attachment.htm
More information about the Users
mailing list