[Users] 200-OK and sendto() problem

[Andreas Granig]

Hi,

The config is the mediaproxy-template from 
http://www.sipwise.com/wizard/ , so it's really just very basic.

The odd thing is, that when using rtpproxy instead of mediaproxy, it 
works as expected. Something must be wrong with my mediaproxy setup, but 
there isn't much to do wrong, and I also get a correct answer from 
mediaproxy for the lookup:

proxydispatcher[26619]: forwarding to mediaproxy on 
/var/run/mediaproxy.sock: got: '84.19.176.11 30002'

I'm running out of ideas. To sum it up: rtpproxy works in this setup, 
mediaproxy doesn't. I haven't seen this before, and I've set up quite a 
lot of such setups :o)

Andreas

Lesley Liu wrote:
> Hi,
>  
> Could you attach all packets or openser.cfg?
>  
> Regards,
> Lesley
> 
>  
> 2007/6/4, Andreas Granig <agranig at sipwise.com 
> <mailto:agranig at sipwise.com>>:
> 
>     Hi,
> 
>      > Maybe you can check the contact of INVITE from sip proxy to callee.
>      > Try fix_contact () for INVITE.
> 
>     The contact is fixed for INVITE. Also, replies are routed according to
>     the Via-Header, so this isn't the issue.
> 
>     What I've found out in the meanwhile is, that it's the use_media_proxy()
>     in the reply-route which causes the problem. If I comment this line,
>     the
>     200-OK is routed without problems (but there's one-way-audio,
>     obviously). Any hints in that direction?
> 
>     Regards,
>     Andreas
> 
>