[Users] Re: [Devel] REMOVED: old fifo implementation

[Klaus Darilion]

Hi Bogdan!

I have problems with the new fifo:

root at pb94:/usr/sbin# openserctl ul show klaus at pernau.at
WARNING: no database engine found - tried ''
400 Too few or too many arguments

although the user is registered:
root at pb94:/usr/sbin# openserctl ul show
WARNING: no database engine found - tried ''
Dumping all contacts may take long: are you sure you want to proceed? 
[Y|N] y
Domain:: location table=512 records=1 max_slot=1
         AOR:: klaus at pernau.at
                 Contact:: 
sip:klaus at 83.136.33.3:61174;rinstance=b1f1648bbed1e0fb;transport=udp Q=
                         Expires:: 3539
                         Callid:: 
N2VhN2I0OGI3NmU4N2I0ZTY1ZTE1YjY0MjY2OWRmN2U.
                         Cseq:: 1
                         User-agent:: eyeBeam release 1008m stamp 36652
                         State:: CS_SYNC
                         Flags:: 0
                         Socket:: udp:213.239.207.29:6060
                         Methods:: 5951

Is it a bug or am I doing something wrong?

regards
klaus



Bogdan-Andrei Iancu wrote:
> Hi Klaus,
> 
> yes, it make sense - I fixed the docs on cvs and web site.
> 
> thanks and regards,
> bogdan
> 
> Klaus Darilion wrote:
> 
>> Hi Bogdan!
>>
>> I suggest to use the default value "/tmp/openser_fifo" also in the 
>> example:
>>
>> http://www.openser.org/docs/modules/1.2.x/mi_fifo.html#AEN80
>>
>> regards
>> klaus
>>
>> Bogdan-Andrei Iancu wrote:
>>
>>> Hi everybody,
>>>
>>> the old fifo implementation (from core) was removed and replaced by 
>>> the MI FIFO module. See
>>>       http://www.openser.org/docs/modules/1.2.x/mi_fifo.html
>>>
>>> why? See:
>>>       http://www.openser.org/pipermail/users/2006-December/008154.html
>>>
>>> To maintain the previous FIFO behaviour, you just have to:
>>>    1) remove "fifo=/tmp/openser_fifo" from your config
>>>    2) load the mi_fifo module
>>>    3) configure modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
>>>
>>> that's all :)
>>>
>>> for an working example, see the default openser.cfg which was already 
>>> updated:
>>>       
>>> http://openser.cvs.sourceforge.net/openser/sip-server/etc/openser.cfg?revision=1.10 
>>>
>>>
>>>
>>> regards,
>>> bogdan
>>>
>>> _______________________________________________
>>> Devel mailing list
>>> Devel at openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>
>>
>>
> 


-- 
Klaus Darilion
nic.at