[Users] No logging. OpenSER on OpenBSD

[Bogdan-Andrei Iancu]

Hi Ben,

    -d           Debugging mode (multiple -d increase the level)
    -E           Log to stderr

you can get the same from cfg with
    debug = 9
    log_stderror = yes

so your openser will not use syslog, but standard error for logging.

now, regarding syslog logging - have you tried not to use the log 
facility stuff? do not set it in either in cfg, neither in syslog.cfg  
....openser should normally log to the default log file.

regards,
bogdan


Ben Ferguson - backcountry.com wrote:
> Hmmmm.  Interestingly, if i:
>
>     #openser -E -dddddddddddddd
>
> I get all sorts of good logging sent to my console:
>
>
>     3(990)  version: <SIP/2.0>
>     3(990) parse_headers: flags=2
>     3(990) Found param type 232, <branch> = <z9hG4bK40b3.2f0d0803.0>; state=16
>     3(990) end of header reached, state=5
>     3(990) parse_headers: Via found, flags=2
>     3(990) parse_headers: this is the first via
>     3(990) After parse_msg...
>     3(990) preparing to run routing scripts...
>     3(990) parse_headers: flags=8
>     3(990) DEBUG: add_param: tag=329cfeaa6ded039da25ff8cbb8668bd2.d88a
>     3(990) DEBUG:parse_to:end of header reached, state=29
>     3(990) DBUG:parse_to: display={}, ruri={sip:1001 at 192.168.1.105}
>     3(990) DEBUG: get_hdr_field: <To> [67]; uri=[sip:1001 at 192.168.1.105]
>     3(990) DEBUG: to body [<sip:1001 at 192.168.1.105>]
>     3(990) parse_headers: flags=100
>     3(990) get_hdr_field: cseq <CSeq>: <43365> <ACK>
>     3(990) DEBUG: get_hdr_body : content_length=0
>     3(990) found end of header
>     3(990) DEBUG: is_maxfwd_present: max_forwards header not found!
>     3(990) DEBUG: add_param: tag=1142574036
>     3(990) DEBUG:parse_to:end of header reached, state=29
>
> Now just to figure out how to pass the -E and -dddddddd options to openserctl and redirect it to a text file...  I may be on to something here that'll work for my setup
>
> -Ben-
>
>
> ----- Original Message -----
> From: "Ben Ferguson - backcountry.com" <bferguson at backcountry.com>
> To: users at openser.org
> Sent: Wednesday, February 21, 2007 5:08:14 PM (GMT-0700) US/Mountain
> Subject: [Users] No logging. OpenSER on OpenBSD
>
> I can't get any logging out of openSER for some reason.  I've tried using the log_facility setup via /etc/syslog.conf and i still cannot get any output.  What am I missing?
>
> Here's the top of my openser.cfg file:
>
>
>     debug=9            # debug level (cmd line: -dddddddddd)
>     fork=yes
>     log_stderror=yes   # (cmd line: -E)
>
>     check_via=no    # (cmd. line: -v)
>     dns=no          # (cmd. line: -r)
>     rev_dns=no      # (cmd. line: -R)
>     port=5060
>     children=4
>     sip_warning=yes
>     #log_facility=LOG_LOCAL7
>
> I've tried un-commenting that last line to correspond to my /etc/syslog.conf:
>
>
>     # don't log messages with LOG_LOCAL7 in /var/log/syslog anymore
>     *.*;auth,authpriv.none,local0.none              -/var/log/syslog
>
>     #
>     # log messages with LOG_LOCAL7 in /var/log/ser.log
>     local7.*                        -/var/log/ser.log
>
> What am i doing wrong?  Any ideas?
>
> Thanks,
> Ben
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>