[Users] Cisco 7960 phones

[Atle Samuelsen]

Hi,

The password is cisco if it's default without any spesific config.

-Atle
* Scott Yagel <syagel at packetcall.net> [070221 19:41]:
> Steve,
> 
> Thanks, this worked really well.  I managed to update one of the phones, at
> least to a certain point.  It downloaded the new image and read at least
> part of the configuration file.  It is now sitting at the "Phone
> Unprovisioned" state. The only problem I have now is that, to complete the
> provisioning, I can't seem to get the Network Configuration unlocked.  The
> old method of hitting **# doesn't seem to work any more.
> 
> Thanks again,
> Scott Yagel
> PacketCall, Inc.
> syagel at packetcall.net
> 
> -----Original Message-----
> From: Stephen Varga [mailto:varga at zbzoom.net] 
> Sent: Wednesday, February 21, 2007 11:38 AM
> To: syagel at packetcall.net
> Cc: users at openser.org
> Subject: Re: [Users] Cisco 7960 phones
> 
> Scott,
> 
> Put the attached files into your tftp server that the phones are pulling 
> their configs and image from. You should also have the following image 
> files in the same tftp server:
> 
>     P003-08-2-00.bin
>     P0S3-08-2-00.loads
>     P0S3-08-2-00.zip
>     P003-08-2-00.sbn
>     P0S3-08-2-00.sb2
> 
> I have used these files to successfully upgrade phones.
> 
> If you have SIPxxxxxxxxxxxx.cnf file created for the phones, make sure 
> the image_version line is commented out.
> 
> The biggest problem I have with this version is using that it reads the 
> dialplan.xml file but it does not work; I am guessing there is a syntax 
> change but can not been able to find SIP documentation related to the 
> 8.2 code on Cisco's website.  I have been staying with the 7.5 version 
> of the code because of this problem.
> 
> I found watching which files are being requested by phone a big help in 
> getting the loads to work properly
> 
> Let me know what happens.
> 
> Steve
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users