[Users] ?opsr? - setup
Michel Bensoussan
michel at extricom.com
Mon Feb 12 11:40:32 CET 2007
Hello
I have some setup problems.
I compiled and install as following:
/prompt$ make mode=debug all
prompt$ su
prompt# make install
/To run openSer I tried:
/prompt# /usr/local/sbin/openser
/
and
/prompt# /usr/local/sbin/openser D E
/
in both case there is the following output:
/ 127.0.0.1 [127.0.0.1]:5060
192.168.1.86 [192.168.1.86]:5060
192.169.4.86 [192.169.4.86]:5060
192.168.13.86 [192.168.13.86]:5060
127.0.0.1 [127.0.0.1]:5060
192.168.1.86 [192.168.1.86]:5060
192.169.4.86 [192.169.4.86]:5060
192.168.13.86 [192.168.13.86]:5060
Listening on
udp: 127.0.0.1 [127.0.0.1]:5060
udp: 192.168.1.86 [192.168.1.86]:5060
udp: 192.169.4.86 [192.169.4.86]:5060
udp: 192.168.13.86 [192.168.13.86]:5060
tcp: 127.0.0.1 [127.0.0.1]:5060
tcp: 192.168.1.86 [192.168.1.86]:5060
tcp: 192.169.4.86 [192.169.4.86]:5060
tcp: 192.168.13.86 [192.168.13.86]:5060
Aliases:
tcp: michel:5060
tcp: michel.local:5060
tcp: localhost:5060
udp: michel:5060
udp: michel.local:5060
udp: localhost:5060
//prompt#
/Attached my config file ( /etc/openser/openser.cfg).
On this config file, I set listen=192.168.13.86 so I expected the
openSER to listen only 192.168.13.86.
Actually I don't understand from where the application takes the
openser.cfg file?
I removed /etc/openser/openser.cfg but the application is still running.
/
/Regards,
Michel.
/
/
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: openser.cfg
Url: http://lists.kamailio.org/pipermail/users/attachments/20070212/75d9ddb1/attachment.asc
More information about the Users
mailing list