[OpenSER-Users] t_relay after failure_route -- problem
Zahid Mehmood
zm23 at columbia.edu
Fri Aug 31 17:32:28 CEST 2007
Hi All,
I am trying to implement serial forking and am using the
example on voice-systems website as a guide. The problem I am
experiencing is as follows.
Failure route rewrite ruri with the next uri to try and calls route[17]
route 17 performs a lookup("location"), finds the usrloc information
and rewrites ruri, however, when t_relay is called it uses the
original ruri (one before the lookup) to do t_relay.
Another issue I'm experiencing is that when processing call after
failure route, ruri_user_avp. Once i rewrite the uri in failure
route, I have to use the following to manually write a value for
ruri_user_avp. Can someone explain why this is happening?
Thanks in advance for your help!!
--
Zahid
]
Some relevant config and debug info:
modparam("lcr", "gw_uri_avp", "1400")
modparam("lcr", "ruri_user_avp", "1402")
route[18] { # used to process pstn/ off system calls
......
if (!is_avp_set("$avp(i:1402)")) {
xlog("L_INFO","$ci: route[22] ** setting ruri_user_avp **\n");
$avp(i:1402) = $rU;
xlog("L_INFO","$ci: route[22] ** setting ruri_user_avp = $avp
(i:1402) **\n");
}
........
} #end route 18
route[11] {
# load all numbers asscociated with the pilot number in $avp
(serial_fork) array
xlog("L_INFO","$ci: route[11] - M=$rm RURI=$ru F=$fu T=$tu IP=$si
\n");
$avp(serial_fork) = "sip:*6" + $rU + "@sipdev.oursiphost.com";
if (avp_db_query("select username from fork where pilot = $rU
order by pri" , "$avp(serial_fork)")) {
xlog("L_INFO", "route[11] $ci: method $rm r-uri <$ru>
\n");
xlog("L_INFO", "route[11] serial_fork = $avp
(serial_fork) remote-user = $rU \n");
t_on_failure("5");
route(17);
exit;
} else {
xlog("L_ERR", "route[11] failed to load serial_fork
info.\n");
}
avp_print(); # debugging only
setflag(8);
} # end of route[11]
route[17] {
xlog("L_INFO","$ci: route[17] - M=$rm RURI=$ru F=$fu T=$tu IP=$si
\n");
$avp(s:inv_timeout) = "10";
if (lookup("location")) { # currently online
registered UA.
xlog("L_INFO","$ci: route[17] - M=$rm RURI=$ru F=$fu T=$tu
IP=$si -- inside location lookup \n");
if (!t_relay()) {
sl_reply_error();
};
return;
} else { # not online
if (does_uri_exist()) { # but exists
xlog("L_INFO", "$ci: Subscriber is offline [$ru]\n");
sl_send_reply("480", "Temporarily Unavailable.");
return;
}
xlog("L_INFO","$ci: route[17] - M=$rm RURI=$ru F=$fu T=$tu
IP=$si -- outside location lookup \n");
};
if (uri=~"^sip:(([0-9()+-])|(%20))+@") {
subst_user('/[()+-]//g'); # strip out the punctuation.
subst_user('/%20//g'); # strip out the white space.
route(18); # all numerics just go to route(18) --
off system calls
return;
};
} # end route[17]
failure_route[5] {
xlog("L_INFO","$ci: failure_route[5] - M=$rm RURI=$ru F=$fu
T=$tu IP=$si\n");
avp_print();
if (avp_pushto("$ruri", "$avp(serial_fork)")) {
append_branch();
xlog("L_INFO","$ci: failure_route[5] $rm r-uri <$ru>
from <$fu> to <$tu>\n");
avp_delete("$avp(serial_fork)");
t_on_failure("5");
route(17);
} else {
xlog("L_INFO","$ci: failure_route[5] $rm r-uri <$ru>
from <$fu> to <$tu>\n");
}
}
Debug info
Aug 31 10:54:56 mousse openser[6815]: a410a3c1-
e4befc20-961fd447 at 10.1.12.174: failure_route[5] - M=INVITE RURI=sip:
10512 at 10.1.12.172:8891 F=sip:10510 at sipdev.oursiphost.com T=sip:
10512 at sipdev.oursiphost.com;user=phone IP=10.1.12.174
Aug 31 10:54:56 mousse openser[6815]: INFO:avpops:print_avp:
p=0xb6039c28, flags=0x0003
Aug 31 10:54:56 mousse openser[6815]: INFO:
name=<inv_timeout>
Aug 31 10:54:56 mousse openser[6815]: INFO:
val_str=<10 / 2>
Aug 31 10:54:56 mousse openser[6815]: INFO:avpops:print_avp:
p=0xb6039bf0, flags=0x0002
Aug 31 10:54:56 mousse openser[6815]: INFO: id=<655>
Aug 31 10:54:56 mousse openser[6815]: INFO:
val_str=<sip:10511 at sipdev.oursiphost.com / 29>
Aug 31 10:54:56 mousse openser[6815]: INFO:avpops:print_avp:
p=0xb6039bb8, flags=0x0002
Aug 31 10:54:56 mousse openser[6815]: INFO: id=<655>
Aug 31 10:54:56 mousse openser[6815]: INFO:
val_str=<sip:10210 at sipdev.oursiphost.com / 29>
Aug 31 10:54:56 mousse openser[6815]: INFO:avpops:print_avp:
p=0xb6039b80, flags=0x0002
Aug 31 10:54:56 mousse openser[6815]: INFO: id=<655>
Aug 31 10:54:56 mousse openser[6815]: INFO:
val_str=<sip:10510 at sipdev.oursiphost.com / 29>
Aug 31 10:54:56 mousse openser[6815]: INFO:avpops:print_avp:
p=0xb6039b48, flags=0x0002
Aug 31 10:54:56 mousse openser[6815]: INFO: id=<655>
Aug 31 10:54:56 mousse openser[6815]: INFO:
val_str=<sip:*610512 at sipdev.oursiphost.com / 31>
Aug 31 10:54:56 mousse openser[6815]: INFO:avpops:print_avp:
p=0xb6039b18, flags=0x0083
Aug 31 10:54:56 mousse openser[6815]: INFO:
name=<is_pilot>
Aug 31 10:54:56 mousse openser[6815]: INFO:
val_str=<y / 1>
Aug 31 10:54:56 mousse openser[6815]: DEBUG:avpops:pushto_avps: 1
avps were processed
Aug 31 10:54:56 mousse openser[6815]: ******* setting for branch 0
flags 0
Aug 31 10:54:56 mousse openser[6815]: a410a3c1-
e4befc20-961fd447 at 10.1.12.174: failure_route[5] INVITE r-uri <sip:
10511 at sipdev.oursiphost.com> from <sip:10510 at sipdev.oursiphost.com>
to <sip:10512 at sipdev.oursiphost.com;user=phone>
Aug 31 10:54:56 mousse openser[6815]: DEBUG:avpops:delete_avps: 1
avps were removed
Aug 31 10:54:56 mousse openser[6815]: a410a3c1-
e4befc20-961fd447 at 10.1.12.174: route[17] - M=INVITE RURI=sip:
10511 at sipdev.oursiphost.com F=sip:10510 at sipdev.oursiphost.com T=sip:
10512 at sipdev.oursiphost.com;user=phone IP=10.1.12.174
Aug 31 10:54:56 mousse openser[6815]: rewrite_uri: Rewriting Request-
URI with 'sip:10511 at 10.1.12.172:8891'
Aug 31 10:54:56 mousse openser[6815]: a410a3c1-
e4befc20-961fd447 at 10.1.12.174: route[17] - M=INVITE RURI=sip:
10511 at 10.1.12.172:8891 F=sip:10510 at sipdev.oursiphost.com T=sip:
10512 at sipdev.oursiphost.com;user=phone IP=10.1.12.174 -- inside
location lookup
Aug 31 10:54:56 mousse openser[6815]: DEBUG: mk_proxy: doing DNS
lookup...
Aug 31 10:54:56 mousse openser[6815]: DEBUG:sip_resolvehost2: no
port, no proto -> do NAPTR lookup!
Aug 31 10:54:56 mousse openser[6815]: DEBUG:filter_and_sort_naptr:
found valid SIP+D2U -> _sip._udp.sipdev.oursiphost.com
Aug 31 10:54:56 mousse openser[6815]: DEBUG:do_srv_lookup: SRV
(_sip._udp.sipdev.oursiphost.com) = mousse.cc.oursiphost.com:5060
Aug 31 10:54:56 mousse openser[6815]: DEBUG:sip_resolvehost2: found!
Aug 31 10:54:56 mousse openser[6815]: check_via_address(10.1.12.174,
10.1.12.174, 0)
Aug 31 10:54:56 mousse openser[6815]: DEBUG:tm:set_timer: relative
timeout is 500000
Aug 31 10:54:56 mousse openser[6815]: DEBUG: add_to_tail_of_timer[4]:
0xb6039eb4 (61500000)
Aug 31 10:54:56 mousse openser[6815]: DEBUG:tm:set_timer: relative
timeout is 30
Aug 31 10:54:56 mousse openser[6815]: DEBUG: add_to_tail_of_timer[0]:
0xb6039ed0 (91)
Aug 31 10:54:56 mousse openser[6815]: DEBUG:tm:relay_reply: branch=0,
save=1, relay=-1
>, CSEQ_N=<CSeq: 1> 2 at sipdev.oursiphost.com;user=phone>ocal: using
FROM=<From: "Zahid 10510" <sip:
10510 at sipdev.oursiphost.com>;tag=BF787F6-F6DD44ED
Aug 31 10:54:56 mousse openser[6815]: DEBUG: cancel_branch: sending
cancel...
Aug 31 10:54:56 mousse openser[6815]: DEBUG:tm:set_timer: relative
timeout is 500000
Aug 31 10:54:56 mousse openser[6815]: DEBUG: add_to_tail_of_timer[4]:
0xb6039e20 (61500000)
Aug 31 10:54:56 mousse openser[6815]: DEBUG:tm:set_timer: relative
timeout is 30
Aug 31 10:54:56 mousse openser[6815]: DEBUG: add_to_tail_of_timer[0]:
0xb6039e3c (91)
More information about the Users
mailing list