[OpenSER-Users] nat pinging question

[Klaus Darilion]

maybe you are loading mediaproxy module too which also sends keep alives?

regards
klaus

Papadopoulos Georgios schrieb:
> Hello all,
>  
> In nathelper the documentation mentions two pinging types (upd 4 byte 
> packets and stateless SIP request). Is there a way to choose between one 
> or the other or are they both activated by default?
> I have configured nathelped to ping with OPTIONS every 15 seconds.
> modparam("nathelper", "natping_interval", 15)
> modparam("nathelper", "sipping_method", "OPTIONS")
> In addition to the OPTIONS packets that are sent every 15 seconds, there 
> is a 4 byte packet that is sent every minute. Why does this happen and 
> is there a way to turn it off?
>  
> This is what the ping packet sequence looks like:
> time      ping
> 0     ---> 4 byte pkt
> 0     ---> OPTIONS
> 15   ---> OPTIONS
> 30   ---> OPTIONS
> 45   ---> OPTIONS
> 60   ---> 4 byte pkt
> 60   ---> OPTIONS
>  
> thank you
>  
> George
>  
>  
>  
> 
> 
>   Disclaimer
> 
> The information in this e-mail and any attachments is confidential. It 
> is intended solely for the attention and use of the named addressee(s). 
> If you are not the intended recipient, or person responsible for 
> delivering this information to the intended recipient, please notify the 
> sender immediately. Unless you are the intended recipient or his/her 
> representative you are not authorized to, and must not, read, copy, 
> distribute, use or retain this message or any part of it. E-mail 
> transmission cannot be guaranteed to be secure or error-free as 
> information could be intercepted, corrupted, lost, destroyed, arrive 
> late or incomplete, or contain viruses.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users