[OpenSER-Users] OpenSER with TLS - method BYE = protocol/port mismatch ??

[Daniel-Constantin Mierla]

Hello,

can you paste the BYE here (you can catch it with ngrep if it is not 
coming via tls, e.g., from asterisk)? Also, the invite going to asterisk 
will be good.

Cheers,
Daniel


On 08/20/07 07:50, David Loh wrote:
> Hi All,
>
> Good day, I'm new to this mailing list :-)
>
> I've setup an OpenSER server with TLS implementation, so far I tested 
> everything works fine,
> but there's strange problem for "BYE" request, from the openser's log 
> it always complaint:
> "Aug 19 22:58:40 ser /sbin/openser[16171]: WARNING:get_send_socket: 
> protocol/port mismatch"
>
> Here's my implementation:
> UA -> OpenSER -> Asterisk (as RTP) -> OpenSER -> UA
> On OpenSER I've two port opened which is Udp 5060 and TCP 5061 (TLS).
> My UA is Eyebeam v1.5 and the CA certificate (self-signed) already 
> installed into IE "Trusted RootCA Certificates".
> So far I've tested p2p and pstn calls (and call to playback 
> balance/asterisk), but the problem is unless UA disconnect the call 
> (initiate BYE),
> otherwise if remote party (p2p/pstn/asterisk) initiate BYE request, my 
> UA will forever stay connected until I disconnect the call manually.
>
> So far I've identified the BYE request from remote party will go into 
> Loose Route, and I've place a xlog to display the R-Uri..
> here's the log from openser: (notes: if UA dial '001' will playback 
> his/her balance from asterisk)
> ------------------------------------------------------------------------------------------------------------- 
>
> Aug 19 22:58:31 ser /sbin/openser[16189]: DBG: INVITE from client 
> sip:%user%@%domain% (%UA_IP%) - p2p call
> Aug 19 22:58:31 ser /sbin/openser[16189]: DBG: INVITE 
> F-[sip:%user%@%domain%] T-[sip:001@%domain%] IP-[%UA_IP%] SUCCESSFUL
> Aug 19 22:58:32 ser /sbin/openser[16189]: DBG: INVITE from client 
> sip:%user%@%domain% (%UA_IP%)
> Aug 19 22:58:32 ser /sbin/openser[16189]: DBG: INVITE from client 
> sip:%user%@%domain% (%UA_IP%) - p2p call
> Aug 19 22:58:32 ser /sbin/openser[16189]: DBG: INVITE 
> F-[sip:%user%@%domain%] T-[sip:001@%domain%] IP-[%UA_IP%] SUCCESSFUL
> Aug 19 22:58:32 ser /sbin/openser[16189]: DBG: 
> [sip:%user%@%domain%](%UA_IP%) ACK [sip:001@%domain%] relayed LOOSE ROUTE
> Aug 19 22:58:32 ser /sbin/openser[16189]: DBG: ruri 
> [sip:001@%Asterisk_IP%] relayed LOOSE ROUTE
> Aug 19 22:58:40 ser /sbin/openser[16171]: DBG: 
> [sip:001@%domain%](%Asterisk_IP%) BYE [sip:%user%@%domain%] relayed 
> LOOSE ROUTE
> Aug 19 22:58:40 ser /sbin/openser[16171]: DBG: ruri 
> [sip:%user%@%domain%:%UA_Port%] relayed LOOSE ROUTE
> Aug 19 22:58:40 ser /sbin/openser[16171]: WARNING:get_send_socket: 
> protocol/port mismatch <<<=============
> Aug 19 22:58:41 ser /sbin/openser[16177]: DBG: 
> [sip:001@%domain%](%Asterisk_IP%) BYE [sip:%user%@%domain%] relayed 
> LOOSE ROUTE
> Aug 19 22:58:41 ser /sbin/openser[16177]: DBG: ruri 
> [sip:%user%@%UA_IP%:%UA_Port%] relayed LOOSE ROUTE
> Aug 19 22:58:42 ser /sbin/openser[16181]: DBG: 
> [sip:001@%domain%](%Asterisk_IP%) BYE [sip:%user%@%domain%] relayed 
> LOOSE ROUTE
> Aug 19 22:58:42 ser /sbin/openser[16181]: DBG: ruri 
> [sip:%user%@%UA_IP%:%UA_Port%] relayed LOOSE ROUTE
> ....... (repeat the last 4 lines N times )
> ------------------------------------------------------------------------------------------------------------- 
>
> Below is my openser.cfg, loose route section
> ------------------------------------------------------------------------------------------------------------- 
>
>       ###############
>        # Loose route #
>        ###############
>    if(loose_route()) {
>        if(has_totag() && (is_method("INVITE") || is_method("ACK"))) {
>            if(nat_uac_test("19") || search("^Route:.*;nat=yes")) {
>                fix_nated_contact();
>            }
>        }
>
>        xlog("L_INFO", "DBG: [$fu]($si) $rm [$tu] relayed LOOSE ROUTE");
>        xlog("L_INFO", "DBG: ruri [$ru] relayed LOOSE ROUTE");
>        t_relay();
>
>        exit;
>    }
> ------------------------------------------------------------------------------------------------------------- 
>
>
> Had anyone encountered the same problems before ? Do you mind to share 
> your experience with me ?
> Your help are greatly appreciated, thanks in advance.
>
> Regards,
> David Loh
>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>