[Users] memory leak in presence module?
Klaus Darilion
klaus.mailinglists at pernau.at
Thu Apr 26 12:57:10 CEST 2007
memory logs:
kill -SIGUSR1:
http://pernau.at/kd/openser/debug-kill-usr1.txt
openser stop:
http://pernau.at/kd/openser/debug-stop3.txt
regards
klaus
Klaus Darilion wrote:
>
> Openser runs out of mem:
> $ sudo openserctl fifo get_statistics all
> core:rcv_requests = 13893
> core:rcv_replies = 18007
> core:fwd_requests = 0
> core:fwd_replies = 0
> core:drop_requests = 0
> core:drop_replies = 0
> core:err_requests = 0
> core:err_replies = 0
> core:bad_URIs_rcvd = 0
> core:unsupported_methods = 0
> core:bad_msg_hdr = 0
> shmem:total_size = 67108864
> shmem:used_size = 65351684
> shmem:real_used_size = 66591880
> shmem:max_used_size = 66953980
> shmem:free_size = 516984
> shmem:fragments = 1052
> sl:1xx_replies = 0
> sl:2xx_replies = 8878
> sl:3xx_replies = 0
> sl:4xx_replies = 2322
> sl:5xx_replies = 2308
> sl:6xx_replies = 0
> sl:sent_replies = 13508
> sl:sent_err_replies = 2308
> sl:received_ACKs = 0
> tm:received_replies = 18007
> tm:relayed_replies = 17652
> tm:local_replies = 1
> tm:UAS_transactions = 8861
> tm:UAC_transactions = 17653
> tm:2xx_transactions = 17652
> tm:3xx_transactions = 0
> tm:4xx_transactions = 1
> tm:5xx_transactions = 0
> tm:6xx_transactions = 0
> tm:inuse_transactions = 8861
> usrloc:registered_users = 2
> usrloc:location-users = 2
> usrloc:location-contacts = 2
> usrloc:location-expires = 0
> registrar:max_expires = 0
> registrar:max_contacts = 0
> registrar:default_expire = 3600
> registrar:accepted_regs = 12
> registrar:rejected_regs = 0
>
>
> after 1h of inactivity:
> $ sudo openserctl fifo get_statistics all
> Password:
> core:rcv_requests = 14285
> core:rcv_replies = 18007
> core:fwd_requests = 0
> core:fwd_replies = 0
> core:drop_requests = 0
> core:drop_replies = 0
> core:err_requests = 0
> core:err_replies = 0
> core:bad_URIs_rcvd = 0
> core:unsupported_methods = 0
> core:bad_msg_hdr = 0
> shmem:total_size = 67108864
> shmem:used_size = 65351684
> shmem:real_used_size = 66591880
> shmem:max_used_size = 66953980
> shmem:free_size = 516984
> shmem:fragments = 1052
> sl:1xx_replies = 0
> sl:2xx_replies = 8922
> sl:3xx_replies = 0
> sl:4xx_replies = 2481
> sl:5xx_replies = 2497
> sl:6xx_replies = 0
> sl:sent_replies = 13900
> sl:sent_err_replies = 2497
> sl:received_ACKs = 0
> tm:received_replies = 18007
> tm:relayed_replies = 17652
> tm:local_replies = 1
> tm:UAS_transactions = 8861
> tm:UAC_transactions = 17653
> tm:2xx_transactions = 17652
> tm:3xx_transactions = 0
> tm:4xx_transactions = 1
> tm:5xx_transactions = 0
> tm:6xx_transactions = 0
> tm:inuse_transactions = 8861
> usrloc:registered_users = 2
> usrloc:location-users = 2
> usrloc:location-contacts = 2
> usrloc:location-expires = 0
> registrar:max_expires = 0
> registrar:max_contacts = 0
> registrar:default_expire = 3600
> registrar:accepted_regs = 51
> registrar:rejected_regs = 0
>
>
>
> regards
> klaus
>
> Daniel-Constantin Mierla wrote:
>> my mistake:
>>
>> # openserctl fifo get_statistics all
>>
>> Cheers,
>> Daniel
>>
>>
>> On 04/26/07 12:36, Klaus Darilion wrote:
>>> # openserctl fifo get_statistics
>>> 400 Too few or too many arguments
>>>
>>> :-(
>>>
>>> I'm using 1.2
>>>
>>>
>>> regards
>>> klaus
>>>
>>>
>>>
>>> Klaus Darilion wrote:
>>>>
>>>>
>>>> Daniel-Constantin Mierla wrote:
>>>>> Hello Klaus,
>>>>>
>>>>> if that is the full log, seems no mem leak in shm. What is the shm
>>>>> memory size you use?
>>>>
>>>> I don't know - I use the default values. But the size should be
>>>> irrelevant as the "no memory left" is still there after 20 minutes
>>>> of inactivity.
>>>>
>>>>> Once you get out of memory can you issue" openserctl fifo
>>>>> get_statistics" and send output?
>>>> ok
>>>>>
>>>>> I don't think is fragmentation, but you can try to compile with
>>>>> -DQM_JOIN_FREE
>>>>>
>>>> ok
>>>>> Do you do the tests over TLS?
>>>> ok
>>>>>
>>>>> Cheers,
>>>>> Daniel
>>>>>
>>>>>
>>>>> On 04/26/07 10:17, Klaus Darilion wrote:
>>>>>> btw: there is no
>>>>>> "PRESENCE:notify: ERROR in function tmb.t_request_within"
>>>>>> in my log file, thus I guess the problem is somewhere else.
>>>>>>
>>>>>> regards
>>>>>> klaus
>>>>>>
>>>>>> Klaus Darilion wrote:
>>>>>>> Hi Anca!
>>>>>>>
>>>>>>> There is still a leak:
>>>>>>> http://pernau.at/kd/openser/debug-stop2.txt
>>>>>>>
>>>>>>> regards
>>>>>>> klaus
>>>>>>>
>>>>>>> Anca-Maria Vamanu wrote:
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> I have made a fix. Please test again with sipp and say if it
>>>>>>>> works now.
>>>>>>>>
>>>>>>>> regards,
>>>>>>>>
>>>>>>>> Anca
>>>>>>>>
>>>>>>>> Klaus Darilion wrote:
>>>>>>>>
>>>>>>>>> Hi!
>>>>>>>>>
>>>>>>>>> Openser 1.2 runs out of memory during presence load tests with
>>>>>>>>> sipp.
>>>>>>>>>
>>>>>>>>> Config snippet:
>>>>>>>>>
>>>>>>>>> if (is_method("PUBLISH")) {
>>>>>>>>> xlog("L_INFO","$ci PUBLISH detected ... outside t_newtran\n");
>>>>>>>>> if (t_newtran()) {
>>>>>>>>> xlog("L_INFO","$ci PUBLISH detected ... inside t_newtran\n");
>>>>>>>>> handle_publish();
>>>>>>>>> xlog("L_INFO","$ci PUBLISH detected, handle_publish ...
>>>>>>>>> done\n");
>>>>>>>>> exit;
>>>>>>>>> } else {
>>>>>>>>> sl_reply_error();
>>>>>>>>> exit;
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>> Memory log after openser stop (after 20 minutes of inactivity):
>>>>>>>>> http://pernau.at/kd/openser/debug-stop.txt
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> regards
>>>>>>>>> klaus Klaus Darilion wrote:
>>>>>>>>>
>>>>>>>>>> Hi Cesc!
>>>>>>>>>>
>>>>>>>>>> Where do you have t_newtran() - in ser or openser?
>>>>>>>>>>
>>>>>>>>>> I have it here in openser just before handle_publish(). It
>>>>>>>>>> works but now openser has run out of mem during my sipp
>>>>>>>>>> performance tests :-(
>>>>>>>>>>
>>>>>>>>>> ...more to come....
>>>>>>>>>>
>>>>>>>>>> Cesc wrote:
>>>>>>>>>>
>>>>>>>>>>> I think I can answer that one ... stateless?
>>>>>>>>>>>
>>>>>>>>>>> I have a presence openser proxied by a SER, both on same
>>>>>>>>>>> machine ...
>>>>>>>>>>> For easier configuration purposes, openser and ser
>>>>>>>>>>> communicate via
>>>>>>>>>>> 127.0.0.1 ...
>>>>>>>>>>>
>>>>>>>>>>> The result is that OK from the PUAs do not get to openser (i
>>>>>>>>>>> guess SER
>>>>>>>>>>> gets confussed by the vias of openser being 0.0.0.0:5060 and the
>>>>>>>>>>> 127.0.0.1 stuff) ... So, openser gets no OK, but it does not
>>>>>>>>>>> matter
>>>>>>>>>>> ...
>>>>>>>>>>> BTW, i have a t_newtran() in there ...
>>>>>>>>>>>
>>>>>>>>>>> Oh, for sure my configuration is messy and improvable ... but
>>>>>>>>>>> for now
>>>>>>>>>>> it works steady :) But the OKs not going through is worrying
>>>>>>>>>>> me a bit
>>>>>>>>>>> ... and also openser not "timing out" or giving an error.
>>>>>>>>>>>
>>>>>>>>>>> Cesc
>>>>>>>>>>>
>>>>>>>>>>> On 4/25/07, Klaus Darilion <klaus.mailinglists at pernau.at> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi!
>>>>>>>>>>>>
>>>>>>>>>>>> Does presence module handles PUBLISH/SUBSCRIBE stateful or
>>>>>>>>>>>> stateless?
>>>>>>>>>>>>
>>>>>>>>>>>> Thus, how should retransmission be handled. Will they be
>>>>>>>>>>>> detected by
>>>>>>>>>>>> presence module or is it possible to wrap the handle_publish
>>>>>>>>>>>> inside
>>>>>>>>>>>> t_newtran()?
>>>>>>>>>>>>
>>>>>>>>>>>> regards
>>>>>>>>>>>> klaus
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>> Users at openser.org
>>>>>>>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Users mailing list
>>>>>>>>>> Users at openser.org
>>>>>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Users mailing list
>>>>>>>>> Users at openser.org
>>>>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> Users at openser.org
>>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at openser.org
>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at openser.org
>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
More information about the Users
mailing list