[Users] memory issues

[Daniel-Constantin Mierla]

Hello,

On 04/23/07 18:44, Ovidiu Sas wrote:
> Hi Daniel,
>
>
> Then the webpage should be updated.  It states:
> Daily Snapshots - This was not updated yet to SVN.
you are right. Done.
>
> Also the webpage should be reworked (font size for titles maybe) ...
> it is a little bit hard to read for someone not familiar with it (just
> my 2c).
Any idea?

Cheers,
Daniel

>
> Regards,
> Ovidiu Sas
>
> On 4/23/07, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
>> Hello,
>>
>> daily snapshots are enabled now for 1.2.x as well:
>>
>> http://www.openser.org/downloads/snapshots/openser-1.2.x/
>>
>> Cheers,
>> Daniel
>>
>> On 04/23/07 17:47, Ovidiu Sas wrote:
>> > Hi Tim,
>> >
>> > Check the download page from openser website:
>> > http://www.openser.org/mos/view/Download/:
>> >
>> > The command that you need to run:
>> > svn co http://openser.svn.sourceforge.net/svnroot/openser/branches/1.2
>> > openser
>> >
>> > Make sure that you have svn installed.
>> >
>> >
>> > Regards,
>> > Ovidiu Sas
>> >
>> > On 4/23/07, Tim Madorma <tmadorma at gmail.com> wrote:
>> >> Hi Daniel,
>> >>
>> >> I have run into a leak in 1.2 and I assume it is the same one that
>> >> Ovidiu ran into. I see in your response that it was "backported to
>> >> 1.2", but I'm not sure how to get the fix. When I look at the SVN
>> >> repository at:
>> >> http://www.openser.org/pub/openser/latest-1.2.x/, the date is earlier
>> >> than the date of your email exchange so I don't think the fix has 
>> been
>> >> added there. Can you please let me know how I can get it?
>> >>
>> >> thanks,
>> >> Tim
>> >>
>> >> On 3/23/07, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
>> >> > Hello Ovidiu,
>> >> >
>> >> > On 03/23/07 17:04, Ovidiu Sas wrote:
>> >> > > Hi Daniel,
>> >> > >
>> >> > > Can we backport this one to 1.2?
>> >> > already done, two minutes after the commit in trunk.
>> >> >
>> >> > Cheers,
>> >> > Daniel
>> >> >
>> >> > >
>> >> > >
>> >> > > Regards,
>> >> > > Ovidiu Sas
>> >> > >
>> >> > > On 3/22/07, Daniel-Constantin Mierla <daniel at voice-system.ro> 
>> wrote:
>> >> > >> Hello,
>> >> > >>
>> >> > >> the supposed fragmentation turned out to be a mem leak in pkg.
>> >> Please
>> >> > >> take the latest SVN version and try again to see if you got same
>> >> > >> results.
>> >> > >>
>> >> > >> Thanks,
>> >> > >> Daniel
>> >> > >>
>> >> > >> On 03/19/07 18:52, Christian Schlatter wrote:
>> >> > >> > ...
>> >> > >> >>> The memory statistics indeed show a high number of memory
>> >> fragments:
>> >> > >> >>>
>> >> > >> >>> before 'out of memory':
>> >> > >> >>>
>> >> > >> >>> shmem:total_size = 536870912
>> >> > >> >>> shmem:used_size = 59607040
>> >> > >> >>> shmem:real_used_size = 60106488
>> >> > >> >>> shmem:max_used_size = 68261536
>> >> > >> >>> shmem:free_size = 476764424
>> >> > >> >>> shmem:fragments = 9897
>> >> > >> >>>
>> >> > >> >>> after 'out of memory' (about 8000 calls per process):
>> >> > >> >>>
>> >> > >> >>> shmem:total_size = 536870912
>> >> > >> >>> shmem:used_size = 4171160
>> >> > >> >>> shmem:real_used_size = 4670744
>> >> > >> >>> shmem:max_used_size = 68261536
>> >> > >> >>> shmem:free_size = 532200168
>> >> > >> >>> shmem:fragments = 57902
>> >> > >> >>>
>> >> > >> >>>>
>> >> > >> >>>> You can try to compile openser with -DQM_JOIN_FREE (add it
>> >> in DEFS
>> >> > >> >>>> variable of Makefile.defs) and test again. Free fragments
>> >> should be
>> >> > >> >>>> merged and fragmentation should not occur -- processing
>> >> will be
>> >> > >> >>>> slower. We will try for next release to provide a better
>> >> solution
>> >> > >> >>>> for that.
>> >> > >> >>>
>> >> > >> >>> Compiling openser with -DQM_JOIN_FREE did not help. I'm not
>> >> sure how
>> >> > >> >>> big of a problem this fragmentation issue is.
>> >> > >> >> What is the number of fragments with QM_JOIN_FREE after
>> >> flooding?
>> >> > >> >
>> >> > >> > The numbers included above are with QM_JOIN_FREE enabled.
>> >> > >> >
>> >> > >> >>> Do you think it would make sense to restart our production
>> >> openser
>> >> > >> >>> instances from time to time just to make sure they're not
>> >> running
>> >> > >> >>> into this memory fragmentation limits?
>> >> > >> >> The issue will occur only when the call rate reaches the
>> >> limits of
>> >> > >> >> the proxy's memory. Otherwise the chunks are reused.
>> >> Transactions and
>> >> > >> >> avps are rounded up to be sure there will be minimized the
>> >> number of
>> >> > >> >> different sizes for memory chunks. It wasn't reported too 
>> often,
>> >> > >> >> maybe that's why no big attention was paid to it. This memory
>> >> system
>> >> > >> >> is in place since the beginning of ser. Alternative is to use
>> >> sysv
>> >> > >> >> shared memory, but is much slower, along with libc private
>> >> memory
>> >> > >> >> manager.
>> >> > >> >
>> >> > >> > I've done some more testing and the same out-of-memory stuff
>> >> happens
>> >> > >> > when I run sipp with 10 calls per second only. I tested with
>> >> > >> > 'children=1' and I only could get through about 8200 calls 
>> (again
>> >> > >> > those 8000 calls / process). And this is with QM_JOIN_FREE
>> >> enabled.
>> >> > >> >
>> >> > >> > Memory statistics:
>> >> > >> >
>> >> > >> > before:
>> >> > >> > shmem:total_size = 536870912
>> >> > >> > shmem:used_size = 2311976
>> >> > >> > shmem:real_used_size = 2335720
>> >> > >> > shmem:max_used_size = 2465816
>> >> > >> > shmem:free_size = 534535192
>> >> > >> > shmem:fragments = 183
>> >> > >> >
>> >> > >> > after:
>> >> > >> > shmem:total_size = 536870912
>> >> > >> > shmem:used_size = 1853472
>> >> > >> > shmem:real_used_size = 1877224
>> >> > >> > shmem:max_used_size = 2465816
>> >> > >> > shmem:free_size = 534993688
>> >> > >> > shmem:fragments = 547
>> >> > >> >
>> >> > >> > So I'm not sure if this is really a fragmentation issue. 10
>> >> cps surely
>> >> > >> > doesn't reach the proxy's memory.
>> >> > >> >
>> >> > >> > Thoughts?
>> >> > >> >
>> >> > >> > Christian
>> >> > >> >
>> >> > >> >
>> >> > >> >
>> >> > >> >> Cheers,
>> >> > >> >> Daniel
>> >> > >> >>
>> >> > >> >>>
>> >> > >> >>> thanks,
>> >> > >> >>> Christian
>> >> > >> >>>
>> >> > >> >>>>
>> >> > >> >>>> Cheers,
>> >> > >> >>>> Daniel
>> >> > >> >>>>
>> >> > >> >>>> On 03/18/07 01:21, Christian Schlatter wrote:
>> >> > >> >>>>> Christian Schlatter wrote:
>> >> > >> >>>>> ...
>> >> > >> >>>>>>
>> >> > >> >>>>>> I always had 768MB shared memory configured though, so I
>> >> still
>> >> > >> >>>>>> can't explain the memory allocation errors I got. Some
>> >> more test
>> >> > >> >>>>>> runs revealed that I only get these errors when using 
>> a more
>> >> > >> >>>>>> production oriented config that loads more modules than
>> >> the one
>> >> > >> >>>>>> posted in my earlier email. I now try to figure out what
>> >> exactly
>> >> > >> >>>>>> causes these memory allocation errors that happen
>> >> reproducibly
>> >> > >> >>>>>> after about 220s at 400 cps.
>> >> > >> >>>>>
>> >> > >> >>>>> I think I found the cause for the memory allocation
>> >> errors. As
>> >> > >> >>>>> soon as I include an AVP write operation in the routing
>> >> script, I
>> >> > >> >>>>> get 'out of memory' messages after a certain number of 
>> calls
>> >> > >> >>>>> generated with sipp.
>> >> > >> >>>>>
>> >> > >> >>>>> The routing script to reproduce this behavior looks like
>> >> (full
>> >> > >> >>>>> config available at
>> >> > >> >>>>> http://www.unc.edu/~cschlatt/openser/openser.cfg):
>> >> > >> >>>>>
>> >> > >> >>>>> route{
>> >> > >> >>>>>         $avp(s:ct) = $ct; # commenting this line solves
>> >> > >> >>>>>               # the memory problem
>> >> > >> >>>>>
>> >> > >> >>>>>         if (!method=="REGISTER") record_route();
>> >> > >> >>>>>         if (loose_route()) route(1);
>> >> > >> >>>>>
>> >> > >> >>>>>         if (uri==myself) rewritehost("xx.xx.xx.xx");
>> >> > >> >>>>>         route(1);
>> >> > >> >>>>> }
>> >> > >> >>>>>
>> >> > >> >>>>> route[1] {
>> >> > >> >>>>>         if (!t_relay()) sl_reply_error();
>> >> > >> >>>>>         exit;
>> >> > >> >>>>> }
>> >> > >> >>>>>
>> >> > >> >>>>> An example log file showing the 'out of memory' 
>> messages is
>> >> > >> >>>>> available at
>> >> http://www.unc.edu/~cschlatt/openser/openser.log .
>> >> > >> >>>>>
>> >> > >> >>>>> Some observations:
>> >> > >> >>>>>
>> >> > >> >>>>> - The 'out of memory' messages always appear after about
>> >> 8000 test
>> >> > >> >>>>> calls per worker process. One call consists of two SIP
>> >> > >> >>>>> transactions and six end-to-end SIP messages. An openser
>> >> with 8
>> >> > >> >>>>> children handles about 64'000 calls, whereas 4 children 
>> only
>> >> > >> >>>>> handle about 32'000 calls. The sipp call rate doesn't
>> >> matter, only
>> >> > >> >>>>> number of calls.
>> >> > >> >>>>>
>> >> > >> >>>>> - The 8000 calls per worker process are independent 
>> from the
>> >> > >> >>>>> amount of shared memory available. Running openser with -m
>> >> 128 or
>> >> > >> >>>>> -m 768 does not make a difference.
>> >> > >> >>>>>
>> >> > >> >>>>> - The more AVP writes are done in the script, the less
>> >> calls go
>> >> > >> >>>>> through. It looks like each AVP write is leaking memory
>> >> (unnoticed
>> >> > >> >>>>> by the memory statistics).
>> >> > >> >>>>>
>> >> > >> >>>>> - The fifo memory statistics do not reflect the 'out of
>> >> memory'
>> >> > >> >>>>> syslog messages. Even if openser does not route a 
>> single SIP
>> >> > >> >>>>> message because of memory issues, the statistics still
>> >> show a lot
>> >> > >> >>>>> of 'free' memory.
>> >> > >> >>>>>
>> >> > >> >>>>>
>> >> > >> >>>>> All tests were done with openser SVN 1.2 branch on Ubuntu
>> >> dapper
>> >> > >> >>>>> x86. I think the same is true for 1.1 version but I
>> >> haven't tested
>> >> > >> >>>>> that yet.
>> >> > >> >>>>>
>> >> > >> >>>>>
>> >> > >> >>>>> Christian
>> >> > >> >>>>>
>> >> > >> >>>
>> >> > >> >>>
>> >> > >> >
>> >> > >> >
>> >> > >> > _______________________________________________
>> >> > >> > Users mailing list
>> >> > >> > Users at openser.org
>> >> > >> > http://openser.org/cgi-bin/mailman/listinfo/users
>> >> > >> >
>> >> > >>
>> >> > >> _______________________________________________
>> >> > >> Users mailing list
>> >> > >> Users at openser.org
>> >> > >> http://openser.org/cgi-bin/mailman/listinfo/users
>> >> > >>
>> >> > >
>> >> >
>> >> > _______________________________________________
>> >> > Users mailing list
>> >> > Users at openser.org
>> >> > http://openser.org/cgi-bin/mailman/listinfo/users
>> >> >
>> >>
>> >
>>
>