[Users] Openser not able to place calls to sipxezphone, no port mentioned in Contact URI
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Thu Sep 14 12:04:45 CEST 2006
Hi,
missing port in contact is not a problem - if no port is set, the
default 5060 will be used.
regards,
bogdan
Vamsi Pottangi wrote:
> Hi All,
>
> Need help on resolving the incomign calls problems with sipxezphone
> which openser as proxy
>
> sizezphone sends "Contact:" URI as
> sip:<usernamename>@<ipadd>;LINEID=<lineid> rather than
> sip:<username>@<ipadd>:<port>
> For the same reason OpenSER is not able to route the incoming calls to
> sipxezphone.
>
> How can I make the sipxezphone(sipxtapi) to send Contact URI with port
> number mentioned?
>
> ~~~Contact(0xb60deb38)~~~
> domain : 'location'
> aor : 'vamsi'
> Contact : 'sip:vamsi at 192.168.101.21
> <mailto:sip:vamsi at 192.168.101.21>;LINEID=a9bd64e174dc'
> Expires : 232
> q :
> Call-ID : '5dd7235bc92046fd79bb68788a7f5f55'
> CSeq : 1
> User-Agent: 'sipXezPhone'
> received : ''
> Path : ''
> State : CS_SYNC
> Flags : 0
> Sock : 192.168.101.35:5060 <http://192.168.101.35:5060> (0x8145be8)
> Methods : 4294967295
> next : (nil)
> prev : (nil)
> ~~~/Contact~~~~
>
>
>
> When I try to do NAT fixing on OpenSER, it records the port from which
> the REGISTER message had recieved and tries to send the INVITE message
> to that port, in this case 1617 rather than 5060. Actually
> sipzexphone is listening on 1617 and 5060 as well which can be found
> from the below netsta -na output
>
> When I snooped the messages, I found that sipzezphone is sending
> register message using port 1617, though the DEFAULT_PORT is 5060
>
> ~~~Contact(0xb60deb38)~~~
> domain : 'location'
> aor : 'vamsi'
> Contact : 'sip:vamsi at 192.168.101.21
> <mailto:sip:vamsi at 192.168.101.21>;LINEID=a9bd64e174dc'
> Expires : 171
> q :
> Call-ID : 'e1102f18dca4dcb81363d75c605632fa'
> CSeq : 7
> User-Agent: ''
> received : 'sip:192.168.101.21:1617 <http://192.168.101.21:1617>'
> Path : ''
> State : CS_SYNC
> Flags : 0
> Sock : 192.168.101.35:5060 <http://192.168.101.35:5060> (0x8145be8)
> Methods : 4294967295
> next : (nil)
> prev : (nil)
> ~~~/Contact~~~~
>
> C:\Documents and Settings\Administrator>netstat -na
>
> Active Connections
>
> Proto Local Address Foreign Address State
> TCP 0.0.0.0:135 <http://0.0.0.0:135> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 0.0.0.0:445 <http://0.0.0.0:445> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 0.0.0.0:2701 <http://0.0.0.0:2701> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 0.0.0.0:2702 <http://0.0.0.0:2702> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 0.0.0.0:3389 <http://0.0.0.0:3389> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 0.0.0.0:42510 <http://0.0.0.0:42510> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 127.0.0.1:19989 <http://127.0.0.1:19989> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 192.168.101.21:139 <http://192.168.101.21:139> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> TCP 192.168.101.21:1501 <http://192.168.101.21:1501>
> 192.168.101.35:22 <http://192.168.101.35:22> ESTABLISHED
> TCP 192.168.101.21:1554 <http://192.168.101.21:1554>
> 192.168.101.21:1555 <http://192.168.101.21:1555> TIME_WAIT
> TCP 192.168.101.21:1615 <http://192.168.101.21:1615>
> 192.168.101.21:1616 <http://192.168.101.21:1616> ESTABLISHED
> TCP 192.168.101.21:1616 <http://192.168.101.21:1616>
> 192.168.101.21:1615 <http://192.168.101.21:1615> ESTABLISHED
> TCP 192.168.101.21:1621 <http://192.168.101.21:1621>
> 192.168.101.35:5060 <http://192.168.101.35:5060> ESTABLISHED
> TCP 192.168.101.21:5060 <http://192.168.101.21:5060> 0.0.0.0:0
> <http://0.0.0.0:0> LISTENING
> UDP 0.0.0.0:445 <http://0.0.0.0:445> *:*
> UDP 0.0.0.0:500 <http://0.0.0.0:500> *:*
> UDP 0.0.0.0:1036 <http://0.0.0.0:1036> *:*
> UDP 0.0.0.0:1037 <http://0.0.0.0:1037> *:*
> UDP 0.0.0.0:1100 <http://0.0.0.0:1100> *:*
> UDP 0.0.0.0:1508 <http://0.0.0.0:1508> *:*
> UDP 0.0.0.0:4500 <http://0.0.0.0:4500> *:*
> UDP 0.0.0.0:4573 <http://0.0.0.0:4573> *:*
> UDP 0.0.0.0:4588 <http://0.0.0.0:4588> *:*
> UDP 0.0.0.0:6060 <http://0.0.0.0:6060> *:*
> UDP 127.0.0.1:123 <http://127.0.0.1:123> *:*
> UDP 127.0.0.1:1038 <http://127.0.0.1:1038> *:*
> UDP 127.0.0.1:1056 <http://127.0.0.1:1056> *:*
> UDP 127.0.0.1:1075 <http://127.0.0.1:1075> *:*
> UDP 127.0.0.1:1105 <http://127.0.0.1:1105> *:*
> UDP 192.168.101.21:123 <http://192.168.101.21:123> *:*
> UDP 192.168.101.21:137 <http://192.168.101.21:137> *:*
> UDP 192.168.101.21:138 <http://192.168.101.21:138> *:*
> UDP 192.168.101.21:1617 <http://192.168.101.21:1617> *:*
> UDP 192.168.101.21:1618 <http://192.168.101.21:1618> *:*
> UDP 192.168.101.21:1619 <http://192.168.101.21:1619> *:*
> UDP 192.168.101.21:1620 <http://192.168.101.21:1620> *:*
> UDP 192.168.101.21:5060 <http://192.168.101.21:5060> *:*
>
> C:\Documents and Settings\Administrator>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Users mailing list
>Users at openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>
More information about the Users
mailing list