[Users] Call not approved
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Wed May 31 11:58:42 CEST 2006
Hi,
check the network trace and see what SIP reply you get from the SIP proxy.
regards,
bogdan
raviprakash sunkara wrote:
> Hi Everybody,
>
> I had arrived a small problem , when i making the call from softphones....
> It logined and when dialing to some other softphone , its show me as "
> CALL NOT aPPROVED "
> what this means,
>
> please solve problem....
>
> and my openser.cfg file
> --------------------------
> #
> # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> debug=4 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> fork=no
> log_stderror=yes
> */
>
> server_signature=yes
> unix_sock="/tmp/openser.sock"
> #user="openser"
> #group="openser"
> listen=192.168.2.55 <http://192.168.2.55>
> check_via=0 # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=3
> alias=192.168.2.55 <http://192.168.2.55>
> fifo="/tmp/openser_fifo"
> fifo_db_url="mysql://openser:openserrw@localhost/openser"
> fifo_mode=0666
> #fifo_dir="/tmp/"
> #fifo_modesock_modefile_mode=0660
>
> #
> # uncomment the following lines for TLS support
> #disable_tls = 0
> #listen = tls:your_IP:5061
> #tls_verify = 1
> #tls_require_certificate = 0
> #tls_method = TLSv1
> #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
> #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
> #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/openser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/openser/modules/sl.so"
> loadmodule "/usr/local/lib/openser/modules/tm.so"
> loadmodule "/usr/local/lib/openser/modules/rr.so"
> loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/openser/modules/usrloc.so"
> loadmodule "/usr/local/lib/openser/modules/registrar.so"
> loadmodule "/usr/local/lib/openser/modules/textops.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/openser/modules/auth.so"
> loadmodule "/usr/local/lib/openser/modules/auth_db.so"
> loadmodule "/usr/local/lib/openser/modules/acc.so"
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> #modparam("usrloc", "db_mode", 1)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this
> config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("usrloc","db_url","mysql://openser:openserrw@localhost/openser")
> #modparam("auth","db_url","mysql://openser:openserrw@localhost/openser")
> modparam("auth_db","db_url","mysql://openser:openserrw@localhost/openser")
> modparam("auth","secret","")
> modparam("acc","log_flag",1)
> modparam("acc","log_level",1)
> modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf")
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> };
>
> if (msg:len >= 2048 ) {
> sl_send_reply("513", "Message too big");
> exit;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> if (!method=="REGISTER")
> record_route();
>
> # subsequent messages withing a dialog should take the
> # path determined by record-routing
> if (loose_route()) {
> # mark routing logic in request
> append_hf("P-hint: rr-enforced\r\n");
> route(1);
> };
>
> if (!uri==myself) {
> # mark routing logic in request
> append_hf("P-hint: outbound\r\n");
> # if you have some interdomain connections via TLS
> #if(uri=~"@tls_domain1.net") {
> # t_relay_to_tls("IP_domain1","port_domain1");
> # exit;
> #} else if(uri=~"@tls_domain2.net") {
> # t_relay_to_tls("IP_domain2","port_domain2");
> # exit;
> #}
> route(1);
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (www_authorize("192.168.2.55 <http://192.168.2.55>",
> "subscriber")) {
> www_challenge("192.168.2.55 <http://192.168.2.55>", "0");
> exit;
> };
>
> save("location");
> setflag(1);
> if(method=="INVITE")
> {
> record_route();
> };
> exit;
> };
>
> lookup("aliases");
> if (!uri==myself) {
> append_hf("P-hint: outbound alias\r\n");
> route(1);
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> exit;
> };
> append_hf("P-hint: usrloc applied\r\n");
> };
>
> route(1);
> }
>
>
> route[1] {
> # send it out now; use stateful forwarding as it works reliably
> # even for UDP2TCP
> if (!t_relay()) {
> sl_reply_error();
> };
> exit;
> }
>
>
>
> Bye
>
> --
> Thanks and Regards with cheers
> Sunkara Ravi Prakash (Voip Developer)
> Hyperion Technology
> www.hyperion-tech.com <http://www.hyperion-tech.com>
> <b>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Users mailing list
>Users at openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>
More information about the Users
mailing list