[Users] Regarding on Freeradius in openser.

[Roberto Pereyra]

Look this howto

http://openser.org/docs/openser-radius-1.0.x.html

roberto

2006/5/8, raviprakash sunkara <sunkara.raviprakash.feb14 at gmail.com>:
> Hello  Everybody,
>
>
>  I'm new to openser and also to freeradius.
>
>  1)how to insert the users in freeradius server
>
>  2) When I test with radiusd - X its show somes errors .
>  The errors are  mention below
>   /usr/local/etc/raddb/users[64]: Unexpected trailing comma
> in check item list for  entry test
>  Errors reading /usr/local/etc/raddb/users
>  radiusd.conf[1047]: files: Module instantiation failed.
>  radiusd.conf[1791] Unknown module "files".
>  radiusd.conf[1727] Failed to parse authorize section.
>
>  3) And also when tested the clients , by using   "radclient   -f  digest
> localhost  auth <shared_secret>"   .  It shows the following  error
>  radclient : no respones from server  ID 134
>
>  4) And also when  I tried with " radtest test test 192.168.2.55 5060
> hyperion" its shows me below one
>  Sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  Re-sending Access-Request of id 233 to 192.168.2.55 port 1812
>          User-Name = "test"
>  radclient: no response from server for ID 233
>
>  5) when i also tried with  " ps -aux | grep radiusd " it show a warning and
> errors
>  Warning: bad syntax, perhaps a bogus '-'? See
> /usr/share/doc/procps-3.2.3/FAQ
>  root     13093  0.0  0.1  4276  696 pts/4    S+   16:41   0:00 grep radiusd
>
>  Please help me in  5 issues which are mention above.
>
>
>
>
>
> --
>  Thanks and Regards with cheers
> Sunkara Ravi Prakash (Voip Developer)
> Hyperion Technology
> www.hyperion-tech.com
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>


--
Ing. Roberto Pereyra
ContenidosOnline
Buscas un buen servicio de telefonía IP, prueba
http://www.contenidosonline.com.ar