[Users] Re: missing record-route when using uac_auth()

[Bogdan-Andrei Iancu]

there is something strange on the cfg - please confirm if there is any 
traffic on loopback interface (messages looping on the proxy).

as the reply shows:

U 62.116.32.102:5060 -> 62.163.103.30:5060
  SIP/2.0 407 Proxy Authentication Required..Via: SIP/2.0/UDP 192.168.0.144:5060;received=62.163.103.30;rport=5060;branch
  =z9hG4bK1888503047..From: <sip:gst at sysfrog.org>;tag=1481684668..To: <sip:00434635361588 at eris.sysfrog.org>;tag=329cfeaa6
  ded039da25ff8cbb8668bd2.4990..Call-ID: 827989729 at 192.168.0.144..CSeq: 21 INVITE..Proxy-Authenticate: Digest realm="sysf
  rog.org", nonce="4422d70719ab3dcb1ff421f74a7a9cbefc3dd47a"..Server: OpenSer (1.1.0-dev16 -tls (i386/linux))..Content-Le
  ngth: 0..Warning: 392 62.116.32.102:5060 "Noisy feedback tells:  pid=16521 req_src_ip=62.116.32.102 req_src_port=5060 i
  n_uri=sip:00434635361588 at eris.sysfrog.org out_uri=sip:00434635361588 at eris.sysfrog.org via_cnt==2".... 


it was indeed created by openser, but as via_cnt=2 and 
req_src_ip=62.116.32.102 shows, the request cycled on lo.

my guess in that the original request was parallely forked to the PSTN 
GW and back to the proxy. GW send 401 and proxy 407.

please check this out.


regards,
bogdan



Günther Starnberger wrote:

>On Fri, Mar 24, 2006 at 12:39:51PM +0200, Bogdan-Andrei Iancu wrote:
>
>Hi,
>
>  
>
>>it's very difficult to formulate an opinion without a network trace. 
>>Please post it somewhere in order to take a look.
>>    
>>
>
>Both problems which I described occur in the same dump file:
>http://gst.sysfrog.org/openser/ngrep1.txt
>
>bye,
>/gst
>  
>