[Users] Cisco radius auth

[Jeff Williams]

Jeff Williams wrote:
> Is there any way to get openser to do radius auth using attribute from
> the Cisco VSA Voice Implementation Guide
> <http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_programming_reference_guide09186a00800b5e17.html>?
> i.e. something like:
>
> Access-Request
>         NAS-IP-Address = 203.56.98.120
>         NAS-Port-Type = Async
>         User-Name = "62186234"
>         cisco-h323-conf-id = "h323-conf-id=89437006 E20011DA B677BBCA
> D2EBCDD5"
>         Called-Station-Id = "0011553334112401"
>         Calling-Station-Id = "0295731743"
>         User-Password =
> "<145>;<22><242>$<251><243>)u<183>h<225>y<173><150><193>"
>
> I would like to get openser to authenticate against an existing billing
> system if possible.
>   
Mmm, I realised after sending this that since SIP does digest auth and
doesn't send a password as such, this is probably not possible.

Jeff