[Users] "513 Message too big" for the Invite

[Bogdan-Andrei Iancu]

Hi Reddy,

probably the message exceeds the 4096 bytes configured in the script. 
try to increase the value or to disable the check (# if......#endif does 
not work - try # or // for each line or the C like /*...*/)...

regards,
bogdan

Reddy, Muralidhar wrote:

> Hello,
>
> Everything works fine if I run Proxy without TLS disabled.
>
> I tried both TCP/UDP, it works fine.
>
> For TLS, Registration went fine however Proxy responds “513 Message 
> too big” to the Invite.
>
> I don’t see any wrong headers in the message.
>
> The length is almost same for TCP and TLS invite message, the only 
> change is sip and sips.
>
> Any ‘C’ file or config file I need to modify?
>
> Openser.conf:
>
> debug=9 # debug level (cmd line: -dddddddddd)
>
> /* Uncomment these lines to enter debugging mode
>
> fork=no
>
> log_stderror=yes
>
> */
>
> check_via=yes
>
> dns=no
>
> rev_dns=no
>
> port=5061
>
> children=4
>
> fifo="/tmp/openser_fifo"
>
> disable_tls = 0
>
> listen = tls:158.218.105.138:5061
>
> tls_verify = on
>
> tls_require_certificate = on
>
> tls_method = TLSv1
>
> tls_certificate = "/home/mreddy/tools/cert.pem"
>
> tls_private_key = "/home/mreddy/tools/priv.pem"
>
> tls_ca_list = "/home/mreddy/tools/root_cert_fluffyCA.pem"
>
> #loadmodule "/usr/local/lib/openser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/openser/modules/sl.so"
>
> loadmodule "/usr/local/lib/openser/modules/tm.so"
>
> loadmodule "/usr/local/lib/openser/modules/rr.so"
>
> loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
>
> loadmodule "/usr/local/lib/openser/modules/usrloc.so"
>
> loadmodule "/usr/local/lib/openser/modules/registrar.so"
>
> loadmodule "/usr/local/lib/openser/modules/textops.so"
>
> route{
>
> # initial sanity checks -- messages with
>
> # max_forwards==0, or excessively long requests
>
> if (!mf_process_maxfwd_header("10")) {
>
> sl_send_reply("483","Too Many Hops");
>
> exit;
>
> };
>
> #if 1
>
> if (msg:len >= 4096 ) {
>
> sl_send_reply("513", "Message too big");
>
> exit;
>
> };
>
> #endif
>
> # we record-route all messages -- to make sure that
>
> # subsequent messages will go through our proxy; that's
>
> # particularly good if upstream and downstream entities
>
> # use different transport protocol
>
> if (!method=="REGISTER")
>
> record_route();
>
> # subsequent messages withing a dialog should take the
>
> # path determined by record-routing
>
> if (loose_route()) {
>
> # mark routing logic in request
>
> append_hf("P-hint: rr-enforced\r\n");
>
> route(1);
>
> };
>
> if (!uri==myself) {
>
> route(1);
>
> };
>
> # if the request is for other domain use UsrLoc
>
> # (in case, it does not work, use the following command
>
> # with proper names and addresses in it)
>
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> save("location");
>
> exit;
>
> };
>
> lookup("aliases");
>
> if (!uri==myself) {
>
> append_hf("P-hint: outbound alias\r\n");
>
> route(1);
>
> };
>
> if (!lookup("location")) {
>
> sl_send_reply("404", "Not Found");
>
> exit;
>
> };
>
> append_hf("P-hint: usrloc applied\r\n");
>
> };
>
> route(1);
>
> }
>
> route[1] {
>
> if (!t_relay()) {
>
> sl_reply_error();
>
> };
>
> exit;
>
> }
>
> Thanks,
>
> //Murali Reddy//
>
> //Texas//// Instruments//
>
> //Murali Reddy//
>
> //Texas//// Instruments//
>
> //Germantown////,MD//
>
> //Phone: 301-515-3716//
>
> //e-mail: ////mreddy at ti.com// <mailto:mreddy at ti.com>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Users mailing list
>Users at openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>  
>