[Users] need help regarding AVPOPS module

Klaus Darilion klaus.mailinglists at pernau.at
Tue Jul 11 14:46:48 CEST 2006


Increase the loglevel and watch the log messages. there should be an 
error somewhere.

regards
klaus

Tanzeel serfaraz wrote:
> Hi users;
> 
> i am new in openser and i am trying to implement
> AVPOPS module in openser specially TRUSTING IPExample:
> http://www.voice-system.ro/docs/avpops/ar01s08.html#ex_trusting)
> 
> when i going to start openser after modification i got
> the messege like this:
> 
> Starting OpenSER : PID file /var/run/openser.pid does
> not exist -- OpenSER start failed
> 
> when i check the .conf file by wrote the command :
> # openser -c -f /usr/local/etc/openser/openser.cfg
>  
> i got the message like this:
> MESSAGE:
> 0(7747) WARNING: fix_socket_list: could not rev.
> resolve 192.168.1.37
>  0(7747) WARNING: fix_socket_list: could not rev.
> resolve 192.168.1.37
> Listening on
>              udp: 127.0.0.1 [127.0.0.1]:5060
>              udp: 192.168.1.37 [192.168.1.37]:5060
>              tcp: 127.0.0.1 [127.0.0.1]:5060
>              tcp: 192.168.1.37 [192.168.1.37]:5060
> Aliases:
>              tcp: localhost:5060
>              tcp: localhost.localdomain:5060
>              tcp: tanzeel:5060
>              udp: localhost:5060
>              udp: localhost.localdomain:5060
>              udp: tanzeel:5060
>  
> config file ok, exiting...
> 
> MY configuration file is this:
> #
> # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33
> bogdan_iancu Exp $
> #
> # simple quick-start config script
> #
>                                                       
>                                                       
>                
> # ----------- global configuration parameters
> ------------------------
>                                                       
>                                                       
>                
> debug=3            # debug level (cmd line:
> -dddddddddd)
> fork=yes
> log_stderror=no    # (cmd line: -E)
>                                                       
>                                                       
>                
> /* Uncomment these lines to enter debugging mode
> fork=no
> log_stderror=yes */
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
> check_via=no    # (cmd. line: -v)
> dns=no          # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/openser_fifo"
> listen=192.168.1.37
> #
> # uncomment the following lines for TLS support
> #disable_tls = 0
> #listen = tls:your_IP:5061
> #tls_verify = 1
> #tls_require_certificate = 0
> #tls_method = TLSv1
> #tls_certificate =
> "/usr/local/etc/openser/tls/user/user-cert.pem"
> #tls_private_key =
> "/usr/local/etc/openser/tls/user/user-privkey.pem"
> #tls_ca_list =
> "/usr/local/etc/openser/tls/user/user-calist.pem"
>                                                       
>                                                     
> 
> # ------------------ module loading
> ----------------------------------
>                                                       
>                                                       
>                
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/openser/modules/mysql.so"
> loadmodule "/usr/local/lib/openser/modules/sl.so"
> loadmodule "/usr/local/lib/openser/modules/tm.so"
> loadmodule "/usr/local/lib/openser/modules/rr.so"
> loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/openser/modules/usrloc.so"
> loadmodule
> "/usr/local/lib/openser/modules/registrar.so"
> loadmodule "/usr/local/lib/openser/modules/textops.so"
> loadmodule "/usr/local/lib/openser/modules/avpops.so"
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/openser/modules/auth.so"
> loadmodule "/usr/local/lib/openser/modules/auth_db.so"
>                                                       
>                                                       
>                
> loadmodule "/usr/local/lib/openser/modules/acc.so"
> loadmodule
> "/usr/local/lib/openser/modules/alias_db.so"
> loadmodule "/usr/local/lib/openser/modules/domain.so"
>                                                       
>                                                       
>                
> 
> 
> 
>                                                       
>                                                       
>                
> # ----------------- setting module-specific parameters
> ---------------
>                                                       
>                                                       
>                
> # -- usrloc params --
>                                                       
>                                                       
>                
> #modparam("usrloc", "db_mode",   0)
>                                                       
>                                                       
>                
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>                                                       
>                                                       
>                
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which
> true in this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>                                                       
>                                                       
>                
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> 
> 
> ################AVPOPS Module Parameters ############
>                                                       
>                                                       
>                
> modparam("avpops", "avp_url",
> "mysql://openser:openserrw@localhost/openser")
> modparam("avpops", "avp_table", "usr_preferences")
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
> # -------------------------  request routing logic
> -------------------
>                                                       
>                                                       
>                
> # main routing logic
>                                                       
>                                                       
>                
> route{
>                                                       
>                                                       
>                
>         # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long
> requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 exit;
>         };
>                                                       
>                                                       
>                
>         if (msg:len >=  2048 ) {
>                 sl_send_reply("513", "Message too
> big");
>                 exit;
>         };
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
> # if the request pretends to belong to a local domain
> if (is_from_local())
> {
>  #authenticate only INVITE and MESSAGES
>         if (method=="INVITE" || method=="MESSAGE")
>         {
>                 # is it a trusted IP address? - first
> load the trusted IPs (avp
>                 # NAME 't_ips" from DB table "ips")
> for the target domain (domain part
>                 # of RURI); then check if at least one
> value of 't_ips' AVPs equals
>                 # the source IP of the request
>                 if
> (!(avp_db_load("$ruri/domain","s:t_ips/ips")
>                                  &&
> avp_check("s:t_ips", "eq/$src_ip/gi")))
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
> {
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
>         # we record-route all messages -- to make sure
> that
>         # subsequent messages will go through our
> proxy; that's
>         # particularly good if upstream and downstream
> entities
>         # use different transport protocol
>         if (!method=="REGISTER")
>                 record_route();
>                                                       
>                                                       
>                
>      }
>    }
>  }
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
>         # subsequent messages withing a dialog should
> take the
>         # path determined by record-routing
> if (loose_route()) {
>                 # mark routing logic in request
>                 append_hf("P-hint: rr-enforced\r\n");
>                 route(1);
>         };
>                                                       
>                                                       
>                
>         if (!uri==myself) {
>                 # mark routing logic in request
>                 append_hf("P-hint: outbound\r\n");
>                 # if you have some interdomain
> connections via TLS
>                 #if(uri=~"@tls_domain1.net") {
>                 #      
> t_relay_to_tls("IP_domain1","port_domain1");
>                 #       exit;
>                 #} else if(uri=~"@tls_domain2.net") {
>                 #      
> t_relay_to_tls("IP_domain2","port_domain2");
>                 #       exit;
>                 #}
>                 route(1);
>                                                       
>                                                     
> };
>                                                       
>                                                       
>                
>         # if the request is for other domain use
> UsrLoc
>         # (in case, it does not work, use the
> following command
>         # with proper names and addresses in it)
>         if (uri==myself) {
>                                                       
>                                                       
>                
>                 if (method=="REGISTER") {
>                                                       
>                                                       
>                
>                         # Uncomment this if you want
> to use digest authentication
>                         if
> (!www_authorize("localhost", "subscriber")) {
>                                
> www_challenge("localhost", "0");
>                                 exit;
>                         };
>                                                       
>                                                       
>                
>                         save("location");
>                         exit;
>                 };
>                                                       
>                                                       
>                
>                 lookup("aliases");
>                 if (!uri==myself) {
>                         append_hf("P-hint: outbound
> alias\r\n");
>                         route(1);
>                 };
>                                                       
>                                                       
>                
>                 # native SIP destinations are handled
> using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not
> Found");
>                         exit;
>                 };
>                 append_hf("P-hint: usrloc
> applied\r\n");
>         };
>                                                       
>                                                       
>                       route(1);
> }
>                                                       
>                                                       
>                
>                                                       
>                                                       
>                
> route[1] {
>         # send it out now; use stateful forwarding as
> it works reliably
>         # even for UDP2TCP
>         if (!t_relay()) {
>                 sl_reply_error();
>         };
>         exit;
> }
> 
> 
> 
> if someone have already configure that example kindly
> send it to me .
> 
> Thank for help 
> 
> Regards 
> 
> 
> 
> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users





More information about the Users mailing list