[Users] Two c= tag in sdp body

[Ovidiu Sas]

Check the new 'c' flag in 1.1 release:
http://www.openser.org/docs/modules/1.1.x/nathelper.html#AEN275


-ovi

On 8/3/06, Pletli Antal <a.pletli at euromacc.hu> wrote:
>
>
>
> Hello,
>
> I use OpenSer with Cisco AS5300/5350/5400 with IOS 12.3.
> When Cisco sends an OK 200 SIP message to OpenSer, there are two "c=IN IPV4"
> tags in sdp body with the same IP address.
> The nathelper module only replaces the last occurence of c= tag so some SIP
> clients works wrong because those  get the first IP from the first  "c="
> tag…
>
> How can i replace the all occurences of "c=" tag in sdp body with the help
> of nathelper?
>
> Thx,
>
> Antal
>
> Content-Type: application/sdp.
> Content-Length: 277.
> .
> v=0.
> o=CiscoSystemsSIP-GW-UserAgent 7144 773 IN IP4 213.253.220.242.
> s=SIP Call.
> c=IN IP4 213.253.xxx.xxx.  -> this is the original address of Cisco GW
> t=0 0.
> m=audio 35944 RTP/AVP 18.
> c=IN IP4 213.253.xxx.yyy.       -> this is the nated address replaced by
> nathelper
> a=rtpmap:18 G729/8000.
> a=fmtp:18 annexb=no.
> m=video 35946 RTP/AVP.
> c=IN IP4 213.253.220.253.
> a=nortpproxy:yes.
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>