[Users] Re: openser and proxy
buxalex at libero.it
buxalex at libero.it
Fri Apr 28 19:37:36 CEST 2006
hello,
some more hints:
if I try to register a softphone (express talk) when openser is off, rightly the answer is:
------------------------------------------------------------
Server 82.104.192.27 did not respond to register (user 001)
Check server details for that line
------------------------------------------------------------
when
openser is on, when I try to register the softphone I get:
------------------------------------------------------------
Register attempt for proxy 82.104.192.27 failed
500 I'm terribly sorry, server error occurred (1/SL)
------------------------------------------------------------
Am I missing something into configuration?
Anyone can please give me some hints?
Many thanks in advance
Alex
---------- Initial Header -----------
>From : users-bounces at openser.org
To : "klaus.mailinglists" klaus.mailinglists at pernau.at
Cc : "users" users at openser.org
Date : Fri, 28 Apr 2006 15:51:07 +0200
Subject : Re: [Users] openser and proxy
> I have this configuration:
>
> | - > LAN
> adsl -> router |
> | -> linux pc with openser
>
>
> the router translate the private IP 192.168.xxx with the public IP 82.xxx
> any softphone in the LAN register with openser but only if I enter as server the IP 192.168.xxx. if I enter the public IP, express talk (softphone) refuse the registration with error 500.
>
> from outside (I tried with a different internet provider) i cannot register anyway.
>
>
> in the openser.cfg I didn-t configure anything related proxies or nat, should I do something?
>
> attached is my openser.cfg
>
> thanks
> alex
>
>
>
>
>
>
>
> ---------- Initial Header -----------
>
> >From : "Klaus Darilion" klaus.mailinglists at pernau.at
> To : "buxalex at libero.it" buxalex at libero.it
> Cc : "users" users at openser.org
> Date : Fri, 28 Apr 2006 13:50:58 +0200
> Subject : Re: [Users] openser and proxy
>
>
>
>
>
>
>
> > buxalex at libero.it wrote:
> > > Hello,
> > >
> > > I have an ADSL internet connection which goes to a router.
> > >>From the router I have a linux machine with openser installed,
> > > and a econd connection goes to a LAN.
> > > Openser IP address = 192.168.100.106 and I have a public IP (82.104.xxx.xxx)dedicated to this address. There is no restriction to any port.
> > > I thought it was enough to be seen from outside, but unfortunately, when I try to register any softphone, the registration fails.
> > >
> >
> > Is there a dedicated router in front of the Linux PC or is the Linux PC
> > also the router?
> >
> > btw: maybe this helps you: http://www.milkfish.org/
> >
> > regards
> > klaus
> >
> > > There is no way to let it work? Should I put openser on internet before the router?
> > >
> > > Thanks
> > > Alessandro
> > >
> > >
> > > I have a openser installation which has an IP address = 192.168.100.106.
> > > To be reachable from softphones
> > > outside the proxy
> > >
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at openser.org
> > > http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >
>
More information about the Users
mailing list