[Users] Forward response

[Bogdan-Andrei Iancu]

on a first look,  see you do double forwarding - once stateless, via 
forward, and second statefull via t_relay().

either place an exit after forward (and process statelessly the 
REGISTERs), either remove the forward() and process statefully 
everything via t_relay.

regards,
bogdan

Benjamin Lawetz wrote:

>Well then I must be doing something really wrong :-)
>
>Because the packet sniffer shows me the packet getting back to the SER, but
>not leaving it afterwards.
>
>Unless my logic is not working properly. Here's my route section (very
>simple, still in the learning stage)it should do the trick or am I way off
>in left field?
>
>route{
>        if (loose_route()) {
>                t_relay();
>                return;
>        }
>        xlog("SIP Request: method [$rm] from [$fu] to [$tu]\n");
>        record_route();
>
>        if (method == "REGISTER") {
>                xlog("SIP REGISTER: method [$rm] from [$fu] to [$tu]\n");
>                fix_nated_contact();
>                ds_select_dst("1","0");
>                xlog("REWROTE TO: [$du]");
>                forward(uri:host, uri:port);
>        }
>        t_relay();
>
>}
>
>Thanks for your help
>Benjamin
>
>-----Original Message-----
>From: Bogdan-Andrei Iancu  
>Sent: April 11, 2006 12:34 PM
>To: Benjamin
>Cc: users at openser.org
>Subject: Re: [Users] Forward response
>
>Hi,
>
>you do not have to do anything special for this - all replies will be
>backward forwarded by openser by default.
>
>regards,
>bogdan
>
>Benjamin Lawetz wrote:
>
>  
>
>>Hello,
>>
>>Classic situation, overgrown asterisk and need to go openser for 
>>load-balancing and failover reasons.
>>
>>We want to do an incremental upgrade to openser, and for the moment we 
>>are trying to use openser as a fancy router in front of asterisk.
>>
>>I'm having a little problem with load-balancing the registration.
>>
>>Clients are mostly behind NAT sending registration to openser. I'm 
>>using the dispatcher module to load-balance it.
>>The registration is going from the client to the openser, openser is 
>>forwarding it to asterisk. Asterisk replies to openser, and that's 
>>where I'm stuck.
>>
>>I want openser to forward the "TRYING" and "OK" response (and obviously 
>>all other responses) to the client, but can't seem to figure out how.
>>
>>Can anybody point me in the right direction?
>>
>>thanks
>>
>>
>>
>>_______________________________________________
>>Users mailing list
>>Users at openser.org
>>http://openser.org/cgi-bin/mailman/listinfo/users
>>
>> 
>>
>>    
>>
>
>
>
>
>
>_______________________________________________
>Users mailing list
>Users at openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
>  
>