[Users] Re: mediaproxy problem

[unplug]

Below is the log from ngrep.  I can't find any different (except IP
address) to cause the problem compared with an device using NAT.
http://meerkat.no-ip.com/openser/calloneway.log


On 4/10/06, unplug <maillisting at gmail.com> wrote:
> I am using openser with mediaproxy enabled.  All device behind NAT can
> make/receive call without problem.  However, when an end device
> connect to the openser directly using public IP (without NAT), the
> following problem will occur.
>
> -when make outgoing calls, I can hear the receiver but receiver can't hear me
> -when incoming call, it works as normal
>
> Does modiaproxy can handle device using NAT and without NAT?  How can
> I solve the above problem?  Is it the port setting problem?
>
> Below is the dial plan and the ini file of mediaproxy.
> http://meerkat.no-ip.com/openser/openser.txt
> http://meerkat.no-ip.com/openser/mediaproxy.txt
>
> Thanks, unplug
>