[Users] Re: [Serusers] no login to openser

[Daniel-Constantin Mierla]

On 10/17/05 20:31, Ronald Wiplinger wrote:
> Daniel-Constantin Mierla wrote:
>
>> On 10/17/05 19:55, Ronald Wiplinger wrote:
>>
>>> Daniel-Constantin Mierla wrote:
>>>
>>>> Hello,
>>>>
>>>> the appropriate mailing list for questions related to openser is 
>>>> users at openser.org (http://openser.org/cgi-bin/mailman/listinfo/users).
>>>>
>>> Thanks for pointing out that.
>>>
>>> I found a part of my problem, but I cannot explain it.
>>> The phone (hard phone as well as a softphone) have been set to 
>>> connect to port 5062, but I see the registration still on 5060, 
>>> where Asterisk is running (on the same machine). The user 800000 has 
>>> no account on Asterisk, therefore the login fails there.
>>>
>>> Any idea where this could come from?
>>
>> maybe there is a special field to set for registrar address in 
>> phone's configuration, or the phone is broken. What kind of phones 
>> have you tried?
>>
>
> That was exactly my first thought too. I use a noname SIP phone, and 
> than I used firefly. The exaclty same behaviour.
never used firefly.
>
> Is there any command line utility to test that?
if you want tot test if the registration works, then you can use sipsak, 
from http://sipsak.org, it is a tiny command line utility. Otherwise, 
you can try some free sip soft phones: kphone, minisip, xten xlite.

Daniel



>
>
> bye
>
> Ronald Wiplinger
>
>> Cheers,
>> Daniel
>>
>>>
>>>
>>> bye
>>>
>>> Ronald Wiplinger
>>>
>>>
>>>> Please see my comments inline.
>>>>
>>>> On 10/17/05 11:44, Ronald Wiplinger wrote:
>>>>
>>>>> (It is my first try, .... I am sure I make something wrong)
>>>>>
>>>>> I have installed openser and it is now running for a while, ... 
>>>>> today I have added two users by:
>>>>>
>>>>> export SIP_DOMAIN=voip.mydomain.com
>>>>> openserctl add 800000 secret0 me at mydomain.com
>>>>> openserctl add 800001 secret1 me at mydomain.com
>>>>>
>>>>> first test:
>>>>>
>>>>> openserctl ul show
>>>>> Dumping all contacts may take long: are you sure you want to 
>>>>> proceed? [Y|N] y
>>>>> ===Domain list===
>>>>> ---Domain---
>>>>> name : 'aliases'
>>>>> size : 512
>>>>> table: 0x2a96f6d120
>>>>> d_ll {
>>>>>    n    : 0
>>>>>    first: (nil)
>>>>>    last : (nil)
>>>>> }
>>>>> ---/Domain---
>>>>> ---Domain---
>>>>> name : 'location'
>>>>> size : 512
>>>>> table: 0x2a96f68f38
>>>>> d_ll {
>>>>>    n    : 1
>>>>>    first: 0x2a96f71180
>>>>>    last : 0x2a96f71180
>>>>> }
>>>>>
>>>>> ...Record(0x2a96f71180)...
>>>>> domain: 'location'
>>>>> aor   : 'admin'
>>>>> ~~~Contact(0x2a96f71298)~~~
>>>>> domain    : 'location'
>>>>> aor       : 'admin'
>>>>> Contact   : 'sip:601 at vpbx.elmit.com'
>>>>> Expires   : Permanent
>>>>> q         : 1
>>>>> Call-ID   : 
>>>>> 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything'
>>>>> CSeq      : 42
>>>>> User-Agent: 'SIP Express Router FIFO'
>>>>> received  : ''
>>>>> State     : CS_SYNC
>>>>> Flags     : 128
>>>>> Sock      : none (null)
>>>>> next      : (nil)
>>>>> prev      : (nil)
>>>>> ~~~/Contact~~~~
>>>>> .../Record...
>>>>>
>>>>> ---/Domain---
>>>>> ===/Domain list===
>>>>>
>>>>>
>>>>> Here it says domain:    'location'   that sounds for me not 
>>>>> correct, shouldn't it be voip.mydomain.com ??
>>>>
>>>>
>>>> It is ok, actually the 'location' is the name of the table (the 
>>>> name of the field is a bit misleading).The sip domain should be 
>>>> visible in aor, but you didn't use 'use_domain' parameter, so it is 
>>>> ignored.
>>>>
>>>>>
>>>>> I use than a hard phone and set it up, but it cannot log on, ... I 
>>>>> also do not see anything happen, when I use openserctl moni
>>>>>
>>>>> What have I done wrong?
>>>>
>>>>
>>>> You can watch the network traffic while trying to register, there 
>>>> could be something misconfigured. Use:
>>>> 'ngrep -qt port 5060' on your sip server and send the output to me 
>>>> to be able to give you more hints.
>>>>
>>>> Cheers,
>>>> Daniel
>>>>
>>>>>
>>>>>
>>>>> BTW, I checked with serweb, and the user 800000 can login!
>>>>
>>>>
>
>
>