[Users] Please help in configuring serweb version 0.9.4

Lokesh Kumar lokesh at interacesso.pt
Thu Nov 17 04:33:35 CET 2005


Hello Mr. Klaus,

I an unable to figure out, how do I have to adopt table definition from ser
to openser. Can you please provide more details, how do i have to configure
it.

I will be really very thankfull to you.

Best Regards
Lokesh

----- Original Message -----
From: "Klaus Darilion" <klaus.mailinglists at pernau.at>
To: "Lokesh Kumar" <lokesh at interacesso.pt>
Cc: "'Jan Janak'" <jan at iptel.org>; <serusers at iptel.org>;
<users at openser.org>; <users-request at openser.org>
Sent: Wednesday, November 16, 2005 9:41 AM
Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
Accounting


> Hi!
>
> please consider some things before posting:
> 1. do not use a wrong subject
> 2. if your email is a new topic, press "New Mail" instead of reply
> 3. Do not cross post when the topic is not interesting for all the
> mailing lists. I would suggest users at openser.org
>
> For your question - yes. I installed serweb (CVS version somewhere in
> August) and used it with openser. Probably you have to adopt table
> definitions from ser to openser.
>
> klaus
>
> Lokesh Kumar wrote:
> > Hello Everyone,
> >
> > I am facing difficulty in configuring serweb with openser. Can anyone
> > provide details of how do i can configure that. Above all is it possible
to
> > configure serweb with openser ???? or I am just wasting my time.
> >
> > I WILL BE VERY THANKFULL FOR EVERYONE
> >
> > Thanks a lot..
> >
> > Lokesh
> >
> > lokesh at interacesso.pt
> >
> >
> >
> > ----- Original Message -----
> > From: "'Jan Janak'" <jan at iptel.org>
> > To: "Bogdan-Andrei Iancu" <bogdan at voice-system.ro>
> > Cc: <users at openser.org>; "'Lenir Santiago'"
> > <lsantiago at globalgatewaycom.com>; <serusers at iptel.org>;
<serdev at iptel.org>;
> > <devel at openser.org>
> > Sent: Wednesday, November 16, 2005 8:28 AM
> > Subject: Re: [Users] RE: [Serusers] Re: [Serdev] Inaccurate Radius
> > Accounting
> >
> >
> >
> >>Why would you do something like this ? All the info that is needed is in
> >>Sip-Translated-Ruquest-ID below. You can see it in the RADIUS dump:
> >>
> >>Sip-Translated-Request-URI = "sip:949449852150#15615551212 at gateway:5060"
> >>
> >>  Jan.
> >>
> >>On 16-11-2005 16:50, Bogdan-Andrei Iancu wrote:
> >>
> >>>Hi Lenir,
> >>>
> >>>you can keep the modified To value into an AVP and use the extra
> >>>accounting feature to log it. See
> >>>      http://www.openser.org/docs/modules/1.1.x/acc.html#AEN115
> >>>and
> >>>      http://www.openser.org/docs/modules/1.1.x/acc.html#AEN350
> >>>
> >>>the problem is how to set it as Called-Station-ID attribute in order to
> >>>avoid overlapping. You can do a trick by playing with the radius
> >>>dictionary (on proxy side) :
> >>>   changed the Called-Station-ID to a different ID attribute
> >>>   set extra accounting with the original attribute ID of
> >
> > Called-Station-ID
> >
> >>>in this way the acc will set de default TO as something else and you
AVP
> >>>as Called-Station-ID ;)
> >>>
> >>>regards,
> >>>bogdan
> >>>
> >>>
> >>>Lenir wrote:
> >>>
> >>>
> >>>>Well, if userA dials to:30, 30 gets translated to:15615551212 and SER
> >
> > dials
> >
> >>>>15615551212, how can I make the acc.so module send the modified
> >>>>to:15615551212 as the Called-Station-ID attribute?
> >>>>
> >>>>This is important for billing, specially if someone forwards to a long
> >>>>distance or international long distance number.
> >>>>
> >>>>-----Original Message-----
> >>>>From: serusers-bounces at iptel.org [mailto:serusers-bounces at iptel.org]
On
> >>>>Behalf Of Jan Janak
> >>>>Sent: Wednesday, November 16, 2005 3:15 AM
> >>>>To: Lenir Santiago
> >>>>Cc: serdev at iptel.org; serusers at iptel.org; users at openser.org;
> >>>>devel at openser.org
> >>>>Subject: [Serusers] Re: [Serdev] Inaccurate Radius Accounting
> >>>>
> >>>>Hello,
> >>>>
> >>>>Called-Station-Id attribute always contains the To URI (not
> >>>>Request-URI). You can find the outbound Request-URI in
> >>>>Sip-Translated-Request-URI attribute.
> >>>>
> >>>>Even if you rewrite To header field, it will never be accounted in
> >>>>Called-Station-Id.
> >>>>
> >>>>Jan.
> >>>>
> >>>>On 15-11-2005 21:59, Lenir Santiago wrote:
> >>>>
> >>>>
> >>>>
> >>>>>Hey guys,
> >>>>>
> >>>>>
> >>>>>
> >>>>>I'm using Radius to do pretty much everything regarding my users,
i.e.
> >>>>>registrations, authorization, features and preferences. I implemented
> >
> > my
> >
> >>>>>
> >>>>own
> >>>>
> >>>>
> >>>>
> >>>>>way of doing speeddial by using AVPs provided by radius and AVPOPs
> >
> > module,
> >
> >>>>>Here is the snippet:
> >>>>>
> >>>>>
> >>>>>
> >>>>>AVP-SIP = speedial:30:15615551212
> >>>>>
> >>>>>
> >>>>>
> >>>>>              avp_subst("s:caller_speedial/i:99", "/(.*):(.*)/\2/");
> >>>>>#15615551212
> >>>>>
> >>>>>              avp_printf("i:98","$rU:*"); #30
> >>>>>
> >>>>>              avp_printf("i:97","sip:$avp($temp2)@$td"); #
> >>>>>sip:15615551212 at xx.xx.xx.xx
> >>>>>
> >>>>>              avp_printf("i:96","<sip:$avp($temp2)@$td>\r\n"); #
> >>>>><sip:15615551212 at xx.xx.xx.xx>.
> >>>>>
> >>>>>              xlog("L_N","    SPEEDIALING: $fU is speed-dialing
> >>>>>$hdr(To)->$avp($temp2)\n");
> >>>>>
> >>>>>              if (avp_check("s:caller_speedial", "fm/$temp1/g")) {
> >>>>>
> >>>>>
> >>>>>
> >>>>>                      #avp_pushto("$To","i:96");
> >>>>>
> >>>>>                      #avp_pushto("$ruri","i:97");
> >>>>>
> >>>>>                      #avp_pushto("$duri","i:97");
> >>>>>
> >>>>>                      #subst('/^To: (.*)@(.*)/To: "$avp($temp2)"
> >>>>><$avp($temp2)@\2/');
> >>>>>
> >>>>>                      #append_hf("To: \"5615551212\"
> >>>>><15615551212 at xx.xx.xx.xx>;user=phone");
> >>>>>
> >>>>>
> >>>>>#subst_uri('/^sip:(.*)@(.*)$/sip:$avp($temp2)@\2/i');
> >>>>>
> >>>>>                      #subst_user('/(.*)/$avp($temp2)/');
> >>>>>
> >>>>>                      #remove_hf("To");
> >>>>>
> >>>>>                      rewriteuser("15615551212");
> >>>>>
> >>>>>                      xlog("L_N","    SPEEDIALING: $fU is dialing
> >>>>>
> >>>>>
> >>>>
> >>>>$hdr(To)
> >>>>
> >>>>
> >>>>
> >>>>>$avp($temp2)\n");
> >>>>>
> >>>>>                      avp_delete("$temp1/g");
> >>>>>
> >>>>>                      avp_delete("$temp2/g");
> >>>>>
> >>>>>
> >>>>>
> >>>>>              };
> >>>>>
> >>>>>
> >>>>>
> >>>>>In this scenario, im forcing it instead of getting the value from
AVPs
> >>>>>
> >>>>>
> >>>>
> >>>>just
> >>>>
> >>>>
> >>>>
> >>>>>for ease of showing my point. The problem that I'm having is that no
> >>>>>
> >>>>>
> >>>>
> >>>>matter
> >>>>
> >>>>
> >>>>
> >>>>>what I do to change the To header or change the R-URI, radius ALWAYS
> >
> > sends
> >
> >>>>>the accounting records with the original R-URI, in my case
> >
> > 30 at xx.xx.xx.xx,
> >
> >>>>>how can I get acc.so to send the final resulting URI
> >>>>>(15615551212 at xx.xx.xx.xx) in the Called-Station-Id AVP?
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
> >
> > id=97,
> >
> >>>>>length=298
> >>>>>
> >>>>>      Acct-Status-Type = Start
> >>>>>
> >>>>>      Service-Type = Sip-Session
> >>>>>
> >>>>>      Acct-Terminate-Cause = 200
> >>>>>
> >>>>>      Error-Cause = Invite
> >>>>>
> >>>>>      User-Name = "1000 at xx.xx.xx.xx"
> >>>>>
> >>>>>      Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
> >>>>>
> >>>>>      Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
> >>>>>
> >>>>>      Sip-Translated-Request-URI =
> >>>>>"sip:949449852150#15615551212 at gateway;user=phone"
> >>>>>
> >>>>>      Acct-Session-Id =
> >>>>>
> >>>>>
> >>>>
> >>>>"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
> >>>>
> >>>>
> >>>>
> >>>>>      Sip-To-Tag = "230383F4-2AF"
> >>>>>
> >>>>>      Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> >>>>>
> >>>>>      Sip-CSeq = "102"
> >>>>>
> >>>>>      NAS-IP-Address = xx.xx.xx.xx
> >>>>>
> >>>>>      NAS-Port = 5060
> >>>>>
> >>>>>      Acct-Delay-Time = 0
> >>>>>
> >>>>>rlm_sql (sql): Reserving sql socket id: 12
> >>>>>
> >>>>>rlm_sql (sql): Released sql socket id: 12
> >>>>>
> >>>>>Sending Accounting-Response of id 97 to xx.xx.xx.xx:39216
> >>>>>
> >>>>>rad_recv: Accounting-Request packet from host xx.xx.xx.xx:39216,
> >
> > id=98,
> >
> >>>>>length=292
> >>>>>
> >>>>>      Acct-Status-Type = Stop
> >>>>>
> >>>>>      Service-Type = Sip-Session
> >>>>>
> >>>>>      Acct-Terminate-Cause = 200
> >>>>>
> >>>>>      Error-Cause = 8
> >>>>>
> >>>>>      User-Name = "1000 at xx.xx.xx.xx"
> >>>>>
> >>>>>      Calling-Station-Id = "sip:1000 at xx.xx.xx.xx"
> >>>>>
> >>>>>      Called-Station-Id = "sip:30 at xx.xx.xx.xx;user=phone"
> >>>>>
> >>>>>      Sip-Translated-Request-URI =
> >>>>>"sip:949449852150#15615551212 at gateway:5060"
> >>>>>
> >>>>>      Acct-Session-Id =
> >>>>>
> >>>>>
> >>>>
> >>>>"000d2890-d47f01e8-1dcc30bc-7a49c7a4 at yy.yy.yy.yy"
> >>>>
> >>>>
> >>>>
> >>>>>      Sip-To-Tag = "230383F4-2AF"
> >>>>>
> >>>>>      Sip-From-Tag = "000d2890d47f20f54576a906-290bdc33"
> >>>>>
> >>>>>      Sip-CSeq = "103"
> >>>>>
> >>>>>      NAS-IP-Address = xx.xx.xx.xx
> >>>>>
> >>>>>      NAS-Port = 5060
> >>>>>
> >>>>>      Acct-Delay-Time = 0
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>Thanks in advance!
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>Lenir
> >>>>>_______________________________________________
> >>>>>Users mailing list
> >>>>>Users at openser.org
> >>>>>http://openser.org/cgi-bin/mailman/listinfo/users
> >>>>>
> >>>>>
> >>>>>
> >>
> >>_______________________________________________
> >>Serusers mailing list
> >>Serusers at iptel.org
> >>http://mail.iptel.org/mailman/listinfo/serusers
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at openser.org
> > http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >
>





More information about the Users mailing list