[Users] Re: Re: no solution yet :( that's why i've decided to write to you
Ozan Blotter
cosmocid at ispro.net.tr
Tue Jun 21 14:09:40 CEST 2005
I've changed the config as follows but still i cannot dial, any ideas ?
#
# $Id: openser.cfg,v 1.1.1.1 2005/06/13 16:47:30 bogdan_iancu Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/openser/modules/sl.so"
loadmodule "/usr/lib/openser/modules/tm.so"
loadmodule "/usr/lib/openser/modules/rr.so"
loadmodule "/usr/lib/openser/modules/maxfwd.so"
loadmodule "/usr/lib/openser/modules/usrloc.so"
loadmodule "/usr/lib/openser/modules/registrar.so"
loadmodule "/usr/lib/openser/modules/textops.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/lib/openser/modules/auth.so"
#loadmodule "/usr/lib/openser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("openser.org", "subscriber")) {
# www_challenge("openser.org", "0");
# break;
# };
save("location");
break;
};
lookup("aliases");
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
if(uri=~"^sip:05[0-9]+@") {# call to mobile
rewritehost("192.168.1.35");
prefix("201");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
----- Original Message -----
From: "Daniel-Constantin Mierla" <daniel at voice-system.ro>
To: "Ozan Blotter" <cosmocid at ispro.net.tr>
Cc: <users at openser.org>
Sent: Tuesday, June 21, 2005 1:39 PM
Subject: Re: no solution yet :( that's why i've decided to write to you
> You have to create a dialing plan for openser also.
>
> In your script, after the block:
> if (!uri==myself) {
> # mark routing logic in request
> append_hf("P-hint: outbound\r\n");
> route(1);
> break;
> };
>
> (Just four your information, you don't need "if (uri==myself)" because
> will be true all the time)
>
> Back to dialing plan, you have to add some rules like:
>
> if(uri=~"^sip:05[0-9]+@")
> { # call to mobile
> rewritehost("192.168.1.35
> <mailto:20105353490056 at 192.168.1.35%29>");
> prefix("201");
> route(1);
> break;
> }
>
> Daniel
>
>
> On 06/20/05 11:00, Ozan Blotter wrote:
>
>> Dear Team,
>> I know this is annoying to post nearly same things but still no answer
>> :( Is it really so hard or can anybody tell me why this is not working.
>> Basically the system is as :
>> ATA 1 : 12345 (registered and can call 54321, no problem) This is Zyxel
>> P2002.
>> ATA 2 : 54321 (registered and can call 12345, no problem) This is Zyxel
>> P2002 too.
>> ANALOG FXO : 201 (registered as 201, for test purposes i only registered
>> one port of it) This is Eusso 7104-S 4 Port Analog FXO and i can add 3
>> more ports as available.
>> With Brekeke's Ondo SIP Proxy, i created a simple dial-plan and it
>> worked, even i can add more prefixes no problem. But in SER i cannot :(
>> I'm using OpenSER. Normally it's like when i want to call a GSM, proxy
>> simply adds a prefix 201 which is same with registered sip number for
>> regarding analog port and forwards it (looks like
>> sip:20105353490056 at 192.168.1.35) <mailto:20105353490056 at 192.168.1.35%29>
>> to Gateway and Gateway simply strips 201 from it and dials 05353490056,
>> yes it connects. But what this same does not work on SER, any ideas
>> because it's very boring to play all day and night ?
>> Thanks....
>> This is my current SER.CFG as it comes with OPENSER. Can you please help
>> me to add lines where or/and add remove somethings...
>> [root at localhost openser]# cat ser.cfg
>> #
>> # $Id: openser.cfg,v 1.1.1.1 2005/06/13 16:47:30 bogdan_iancu Exp $
>> #
>> # simple quick-start config script
>> #
>> # ----------- global configuration parameters ------------------------
>> #debug=3 # debug level (cmd line: -dddddddddd)
>> #fork=yes
>> #log_stderror=no # (cmd line: -E)
>> /* Uncomment these lines to enter debugging mode
>> fork=no
>> log_stderror=yes
>> */
>> check_via=no # (cmd. line: -v)
>> dns=no # (cmd. line: -r)
>> rev_dns=no # (cmd. line: -R)
>> #port=5060
>> #children=4
>> fifo="/tmp/openser_fifo"
>> # ------------------ module loading ----------------------------------
>> # Uncomment this if you want to use SQL database
>> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
>> loadmodule "/usr/lib/openser/modules/sl.so"
>> loadmodule "/usr/lib/openser/modules/tm.so"
>> loadmodule "/usr/lib/openser/modules/rr.so"
>> loadmodule "/usr/lib/openser/modules/maxfwd.so"
>> loadmodule "/usr/lib/openser/modules/usrloc.so"
>> loadmodule "/usr/lib/openser/modules/registrar.so"
>> loadmodule "/usr/lib/openser/modules/textops.so"
>> # Uncomment this if you want digest authentication
>> # mysql.so must be loaded !
>> #loadmodule "/usr/lib/openser/modules/auth.so"
>> #loadmodule "/usr/lib/openser/modules/auth_db.so"
>> # ----------------- setting module-specific parameters ---------------
>> # -- usrloc params --
>> modparam("usrloc", "db_mode", 0)
>> # Uncomment this if you want to use SQL database
>> # for persistent storage and comment the previous line
>> #modparam("usrloc", "db_mode", 2)
>> # -- auth params --
>> # Uncomment if you are using auth module
>> #
>> #modparam("auth_db", "calculate_ha1", yes)
>> #
>> # If you set "calculate_ha1" parameter to yes (which true in this
>> config),
>> # uncomment also the following parameter)
>> #
>> #modparam("auth_db", "password_column", "password")
>> # -- rr params --
>> # add value to ;lr param to make some broken UAs happy
>> modparam("rr", "enable_full_lr", 1)
>> # ------------------------- request routing logic -------------------
>> # main routing logic
>> route{
>> # initial sanity checks -- messages with
>> # max_forwards==0, or excessively long requests
>> if (!mf_process_maxfwd_header("10")) {
>> sl_send_reply("483","Too Many Hops");
>> break;
>> };
>> if (msg:len >= 2048 ) {
>> sl_send_reply("513", "Message too big");
>> break;
>> };
>>
>> # we record-route all messages -- to make sure that
>> # subsequent messages will go through our proxy; that's
>> # particularly good if upstream and downstream entities
>> # use different transport protocol
>> if (!method=="REGISTER") record_route();
>> # subsequent messages withing a dialog should take the
>> # path determined by record-routing
>> if (loose_route()) {
>> # mark routing logic in request
>> append_hf("P-hint: rr-enforced\r\n");
>> route(1);
>> break;
>> };
>> if (!uri==myself) {
>> # mark routing logic in request
>> append_hf("P-hint: outbound\r\n");
>> route(1);
>> break;
>> };
>> # if the request is for other domain use UsrLoc
>> # (in case, it does not work, use the following command
>> # with proper names and addresses in it)
>> if (uri==myself) {
>> if (method=="REGISTER") {
>> # Uncomment this if you want to use digest authentication
>> # if (!www_authorize("openser.org", "subscriber"))
>> {
>> # www_challenge("openser.org", "0");
>> # break;
>> # };
>> save("location");
>> break;
>> };
>> lookup("aliases");
>> if (!uri==myself) {
>> append_hf("P-hint: outbound alias\r\n");
>> route(1);
>> break;
>> };
>> # native SIP destinations are handled using our USRLOC DB
>> if (!lookup("location")) {
>> sl_send_reply("404", "Not Found");
>> break;
>> };
>> };
>> append_hf("P-hint: usrloc applied\r\n");
>> route(1);
>> }
>> route[1]
>> {
>> # send it out now; use stateful forwarding as it works reliably
>> # even for UDP2TCP
>> if (!t_relay()) {
>> sl_reply_error();
>> };
>> }
>> [root at localhost openser]#
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>Team mailing list
>>Team at openser.org
>>http://openser.org/cgi-bin/mailman/listinfo/team
>>
More information about the Users
mailing list