[Users] rpid problem

[Bogdan-Andrei Iancu]

Hi Klaus,

nice debugging :). I think this problem should be reported to Maxim 
since sounds a little be strange to me also...

regards,
bogdan

Klaus Darilion wrote:

> Hi Bogdan!
>
> Thanks dor the DEBUG info. I found the problem. The *vp received from 
> radiusclient was NULL.
>
> There were also other RADIUS attributes in the RADIUS response, which 
> were not in the dictionary of the radiusclient. Thus, the radiusclient 
> discarded all RADIUS attributes :-(
>
> IMO, the radiusclient should be more tolerant.
>
> regards,
> klaus
>
> PS: http://openser.org/dokuwiki/doku.php?id=radius
>
>
> Bogdan-Andrei Iancu wrote:
>
>> Hi Klaus,
>>
>> I just added (on cvs) more debug messages in auth_radius when 
>> extracting AVPs. As I have no access to an auth RADIUS server, please 
>> give it a try and send my the debug output.
>>
>> regards,
>> bogdan
>>
>> Klaus Darilion wrote:
>>
>>> Hi!
>>>
>>> I'm using openser CVS and try to deliver the rpid using auth_radius. 
>>> But  the rpid never appears in the AVPs. Also other AVP-SIP 
>>> attributes (e.g. SIP-AVP = #101:TEST) do not appear in the AVP.
>>>
>>> Filling AVPs in the .cfg using avp_write("$ruri/username","$ruser"); 
>>> works fine and are printed with avp_print.
>>>
>>>
>>> Any ideas how I can track down this problem?
>>>
>>> thanks
>>> klaus
>>>
>>> The radius server responds with a SIP-AVP (225) attribute (verfied 
>>> with tcpdump):
>>> rpid:<sip:+4359966366102 at 1013cbc.com>
>>>
>>>
>>> my cfg snippet (full config attached):
>>>   if (!radius_proxy_authorize("")) {
>>>     xlog("L_WARN","wrong or no credentials - challenging client ...");
>>>     proxy_challenge("", "0");
>>>     exit;
>>>   };
>>>   xlog("L_WARN","start avp_print()-");
>>>   avp_print();
>>>   xlog("L_WARN","stop avp_print()--");
>>>
>>>
>>> the debug log:
>>>  8(5807) checking REGISTER authentication ... 8(5807) check_nonce(): 
>>> comparing [42e78dca8153d605c63042be302f64af00e1abfc] and 
>>> [42e78dca8153d605c63042be302f64af00e1abfc]
>>>  8(5807) DEBUG:auth_radius:radius_authorize_sterman: Success
>>>  8(5807) xl_printf: final buffer length 37
>>>  8(5807) start avp_print() - 8(5807) xl_printf: final buffer length 37
>>>  8(5807) stop avp_print() -- 8(5807) xl_printf: final buffer length 58
>>>
>>
>>
>
>