[Users] rpid problem
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Wed Jul 27 17:56:06 CEST 2005
Hi Klaus,
I just added (on cvs) more debug messages in auth_radius when extracting
AVPs. As I have no access to an auth RADIUS server, please give it a try
and send my the debug output.
regards,
bogdan
Klaus Darilion wrote:
> Hi!
>
> I'm using openser CVS and try to deliver the rpid using auth_radius.
> But the rpid never appears in the AVPs. Also other AVP-SIP attributes
> (e.g. SIP-AVP = #101:TEST) do not appear in the AVP.
>
> Filling AVPs in the .cfg using avp_write("$ruri/username","$ruser");
> works fine and are printed with avp_print.
>
>
> Any ideas how I can track down this problem?
>
> thanks
> klaus
>
> The radius server responds with a SIP-AVP (225) attribute (verfied
> with tcpdump):
> rpid:<sip:+4359966366102 at 1013cbc.com>
>
>
> my cfg snippet (full config attached):
> if (!radius_proxy_authorize("")) {
> xlog("L_WARN","wrong or no credentials - challenging client ...");
> proxy_challenge("", "0");
> exit;
> };
> xlog("L_WARN","start avp_print()-");
> avp_print();
> xlog("L_WARN","stop avp_print()--");
>
>
> the debug log:
> 8(5807) checking REGISTER authentication ... 8(5807) check_nonce():
> comparing [42e78dca8153d605c63042be302f64af00e1abfc] and
> [42e78dca8153d605c63042be302f64af00e1abfc]
> 8(5807) DEBUG:auth_radius:radius_authorize_sterman: Success
> 8(5807) xl_printf: final buffer length 37
> 8(5807) start avp_print() - 8(5807) xl_printf: final buffer length 37
> 8(5807) stop avp_print() -- 8(5807) xl_printf: final buffer length 58
>
More information about the Users
mailing list