[Users] timeout problem with media gateway
Matteo Piazza
matteo.piazza at create-net.it
Mon Dec 19 10:02:38 CET 2005
HI, In my serial forking configuration I have this problem:
if i use the a media gateway ( asterisk ) on the same machine ( but I
see also on the another machine) of openser ( on the 5061 port) I have a
problem with the timeout of a call. The call continues beyond the
timeout and when by the PSTN telephone I reject the call appears the
following log message:
Warning: sl_send_reply: I won't send a reply for ACK!!
Where I have mistake? Any idea?
Another thing. I see that I redirect the call directly in the media
gateway, (for example a location of a user is a PSTN number) whitout the
traslation of IP number, all is ok.
Matteo
======================================
#
# $Id: openser.cfg$
#
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/openser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/openser/modules/mysql.so"
loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"
loadmodule "/usr/local/lib/openser/modules/avpops.so"
loadmodule "/usr/local/lib/openser/modules/xlog.so"
loadmodule "/usr/local/lib/openser/modules/lcr.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/openser/modules/auth.so"
loadmodule "/usr/local/lib/openser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("registrar", "append_branches", 1)
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("usrloc","db_url","mysql://openser:heslo@127.0.0.1/openser")
modparam("auth_db","db_url","mysql://openser:heslo@127.0.0.1/openser")
modparam("lcr","db_url","mysql://openser:heslo@127.0.0.1/openser")
modparam("avpops","avp_url","mysql://openser:heslo@127.0.0.1/openser")
modparam("avpops","avp_table","usr_preferences")
modparam("tm", "fr_timer", 7)
modparam("tm", "fr_inv_timer", 10)
modparam("tm", "wt_timer", 5)
#modparam("avpops","avp_aliases","fwdbusy=i:665")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# ==============================================
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
# ==============================================
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# =============================
# Notify Keep-Alive Section
# ============================
if ((method=="NOTIFY") && search("Event: keep-alive")) {
sl_send_reply("200","OK");
exit;
};
if (method =="INVITE" && uri =~"^sip:0[0-9]*@*"){
log(1, "Check 1 Start PSTN Call\n");
rewritehostport("192.168.9.97:5061");
}
# ========================================================
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
#========================================================
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
if(method=="BYE"){
t_relay();
exit;
};
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
#if(uri=~"@tls_domain1.net") {
# t_relay_to_tls("IP_domain1","port_domain1");
# exit;
#} else if(uri=~"@tls_domain2.net") {
# t_relay_to_tls("IP_domain2","port_domain2");
# exit;
#}
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("create-net.it", "subscriber")) {
www_challenge("create-net.it", "0");
exit;
};
save("location");
exit;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
# =======================================
# PSTN Getaway
# =======================================
if(method=="INVITE"){
if (avp_db_load("$ruri","s:fwdactive")) {
if(avp_check("s:fwdactive","eq/y/i")){
log(1,"FWD ACTIVE\n!");
setflag(2);
}
};
if (avp_db_load("$ruri","s:mailactive")) {
if(avp_check("s:mailactive","eq/y/i")){
log(1,"MAIL ACTIVE\n!");
setflag(4);
}
}
if(load_contacts()){
xlog("L_ERR","LOAD CONTACTS!\n");
setflag(1);
};
if(next_contacts()){
xlog("L_ERR","NEXT CONTACT!\n");
};
};
if(isflagset(2)){
t_on_failure("1");
t_relay();
exit;
}
else {
if(isflagset(4)){
t_on_failure("2");
t_relay();
exit;
}
else {
t_on_failure("3");
t_relay();
exit;
}
};
}
route[1] {
# log(1,"ROUTE 1 !\n");
if (!t_relay()) {
sl_reply_error();
};
exit;
}
route[2] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
log(1,"ROUTE 2 !\n");
sl_send_reply("181","CALL IS BEING FORWARDED");
t_on_failure("1");
if (!t_relay()) {
sl_reply_error();
};
exit;
}
failure_route[1]{
log(1,"FAILURE ROUTE FORWARD !\n");
if (t_check_status("408")){
if (next_contacts()) {
log(1,"NUOVO CONTATTO !\n");
route(2);
exit;
}
else {
log(1,"FINE CHIAMATA - TIME OUT!\n");
if (isflagset(4)){
log(1,"ATTIVAZIONE VOICEMAIL!\n");
revert_uri();
xlog("L_ERR","<$ruri>");
rewritehostport("192.168.9.97:5061");
append_branch();
t_relay();
exit;
}
exit;
};
}
else {
if ( t_check_status("603") || t_check_status("486") ){
log(1,"OCCUPATO!\n");
if (isflagset(4)){
log(1,"ATTIVAZIONE VOICEMAIL!\n");
revert_uri();
xlog("L_ERR","<$ruri>");
rewritehostport("192.168.9.97:5061");
append_branch();
t_relay();
exit;
}
exit;
}
};
}
failure_route[2] {
log(1,"FINE CHIAMATA 2 - SENZA FORWARD!\n");
revert_uri();
xlog("L_ERR","<$ruri>");
rewritehostport("192.168.9.97:5061");
append_branch();
t_relay();
exit;
}
failure_route[3] {
log(1,"FINE CHIAMATA 3 - SENZA FORWARD!\n");
if ( t_check_status("603") || t_check_status("486") ){
t_relay();
exit;
}
exit;
}
=======================================
Matteo Piazza, Junior Researcher
CREATE-NET
Via Solteri, 38 - 38100 Trento - Italy
email: matteo.piazza at create-net.it
Tel: +39-0461-408400ext:308
www.create-net.it
=======================================
More information about the Users
mailing list