[SR-Users] Problem with update/retrigger a htable

[Bernd Krueger-Knauber]

Hi Daniel-Constantin,

I just found this parameter too.
I set it now to 10 seconds, but for example a 30 second expire is only 
executed every 40 seconds.

It looks, that I'm not able to set the same entry again inside of the 
event_route.
Maybe it is deleted after the event_route is executed.
There should be a check afterards if the entry is still expired before 
deleting it.
I found an ugly solution:
I use 2 identical htables and toggle between them:

event_route[htable:expired:userpush1] {
     xinfo("[event_route] userpush1 Record expired $shtrecord(key) => 
$shtrecord(value)");
     $sht(userpush2=>$shtrecord(key)) = $shtrecord(value);
}

event_route[htable:expired:userpush2] {
     xinfo("[event_route] userpush2 Record expired $shtrecord(key) => 
$shtrecord(value)");
     $sht(userpush1=>$shtrecord(key)) = $shtrecord(value);
}

It works, but it is ugly.

Thank you for your response.

Bernd



Am 21.11.2022 um 11:34 schrieb Daniel-Constantin Mierla:
> Hello,
>
> check the docs of the module, there is a modparam to set the timer
> interval, which by default is 20 secods.
>
> Then, to troubleshoot, run with debug=3 and watch the log messages for
> hints of what happens. Also, dump the htable via rpc to see its content.
>
> Cheers,
> Daniel
>
> On 21.11.22 08:50, Bernd Krueger-Knauber wrote:
>> Hi members,
>>
>> I run into a problemm with htable.
>> For user push notifications I need a loop.
>>
>> So I did the following for a first test:
>>
>> modparam("htable", "htable", "user=>size=3;autoexpire=5")
>>
>> ...
>>
>>
>> event_route[htable:mod-init] {
>>      xinfo("htable init");
>>      $sht(user=>testkey) = "testvalue";
>> }
>>
>> event_route[htable:expired:user] {
>>      xinfo("Record expired $shtrecord(key) => $shtrecord(value)");
>>      $sht(user=>$shtrecord(key)) = $shtrecord(value);
>> }
>>
>>
>> I see the htable init, and I reach Record expired, but only once.
>> The 'new' entry
>> $sht(user=>$shtrecord(key)) = $shtrecord(value);
>> seams not to be re-added, because I never reach the expired event again.
>>
>> I expected to see cyclic expired events.
>> Also strange:
>> expire is set to 5 seconds I get:
>>
>> Nov 21 08:34:50 xxx /usr/sbin/kamailio[254662]: INFO: <script>: htable
>> init
>> ...
>> Nov 21 08:35:10 xxx /usr/sbin/kamailio[254671]: INFO: <script>: Record
>> expired testkey => testvalue
>>
>> If I'm right, this are 20 seconds and not 5.
>>
>> Any ideas what's wrong?
>>
>> Best regards
>>
>>
>> __________________________________________________________
>> Kamailio - Users Mailing List - Non Commercial Discussions
>> sr-users at lists.kamailio.org
>> Important: keep the mailing list in the recipients, do not reply only
>> to the sender!
>> Edit mailing list options or unsubscribe:
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


-- 
EDNT GmbH
Werner-von-Siemens-Strasse 7
64625 Bensheim
www.ednt.de

Registergericht: Darmstadt
Registernummer: 24972

Geschäftsführerin: Kerstin Knapp