[SR-Users] rtpengine - SRTP <> RTP missing a=crypto
Rhys Hanrahan
rhys at nexusone.com.au
Thu Mar 3 14:47:41 CET 2022
Hi Richard,
Yes, from what I’ve seen in the logs there are multiple branches happening. One between Teams and Kamailio and one between Kamailio and Asterisk.
In terms of the rtpengine processing, I’ve tried lots of different variations, but right now I’ve got:
* Rtpengine_manage() by itself for new branches and replies (MANAGE_BRANCH, MANAGE_REPLY)
* Rtpengine_manage(“RTP/AVP”) or rtpengine_manage(“RTP/SAVP”) essentially in request_route for the initial invites to/from Teams
* I do also have the stock NATMANAGE using rtpengine but there’s no NAT involved here so I don’t think it applies.
So as far as I can tell, I shouldn’t be calling rtpengine_manage multiple times. Is this bad to do? I did have previous configs where I was doing this. E.g. during RELAY I would call it with general options and then just modify AVP or SAVP in another section.
Interestingly, I noticed that a new branch is created just as I answer the call, and this is when it fails, so perhaps the issue is with how I’m handling new branches then? Below is a bit of a log to try and summarise what’s happening. Unfortunately it’s not logging the MS Teams side of the call except for the initial invite.
I will work on getting you a sip dump as it’s probably the easiest way to properly see what’s going on. Thanks!
root at sbc5-syd-01:/etc/kamailio# tail -f /var/log/syslog | grep RTPEngine
Mar 4 00:39:38 sbc5-syd-01 kamailio[9240]: 44(9311) ERROR: {1 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: Converting Teams outbound call from SRTP to RTP before relay.
Mar 4 00:39:38 sbc5-syd-01 kamailio[9240]: 44(9311) ERROR: {1 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: New Branch to sip:+61xxx at kamailio:5060
Mar 4 00:39:38 sbc5-syd-01 kamailio[9240]: 44(9311) ERROR: {1 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: RTPEngine: Converting to RTP
Mar 4 00:39:38 sbc5-syd-01 kamailio[9240]: 11(9278) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: Reply 100 from kamailio:5060 to asterisk:5060
Mar 4 00:39:40 sbc5-syd-01 kamailio[9240]: 9(9276) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: Reply 183 from kamailio:5060 to asterisk:5060
Mar 4 00:39:40 sbc5-syd-01 kamailio[9240]: 9(9276) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: RTPEngine: Sticking to SRTP
Mar 4 00:39:40 sbc5-syd-01 kamailio[9240]: 15(9282) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: Reply 183 from kamailio:5060 to asterisk:5060
Mar 4 00:39:40 sbc5-syd-01 kamailio[9240]: 15(9282) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: RTPEngine: Sticking to SRTP
Mar 4 00:39:49 sbc5-syd-01 kamailio[9240]: 16(9283) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: Reply 200 from kamailio:5060 to asterisk:5060
Mar 4 00:39:49 sbc5-syd-01 kamailio[9240]: 16(9283) ERROR: {2 1 INVITE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: RTPEngine: Sticking to SRTP
Mar 4 00:39:49 sbc5-syd-01 kamailio[9240]: 46(9314) ERROR: {1 2 BYE 5b76dfb297c455358bb0ec0dac3c1af7} <script>: -- RTPEngine: New Branch to sip:asterisk:5060
*** Call fails here
Rhys Hanrahan | Chief Information Officer
e: rhys at nexusone.com.au<mailto:rhys at nexusone.com.au>
[www.nexusone.com.au]<http://www.nexusone.com.au/> [signature_769552444] <http://www.fusiontech.com.au/>
NEXUS ONE | FUSION TECHNOLOGY SOLUTIONS
p: 1800 NEXUS1 (1800 639 871) or 1800 565 845 | a: Suite 12.03 Level 12, 227 Elizabeth Street, Sydney NSW 2000
www.nexusone.com.au<http://www.nexusone.com.au/> | www.fusiontech.com.au<http://www.fusiontech.com.au/>
The information in this email and any accompanying attachments may contain; a. Confidential information of Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd or third parties; b. Legally privileged information of Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd or third parties; and or c. Copyright material Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd or third parties. If you have received this email in error, please notify the sender immediately and delete this message. Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd does not accept any responsibility for loss or damage arising from the use or distribution of this email.
Please consider the environment before printing this email.
From: sr-users <sr-users-bounces at lists.kamailio.org> on behalf of Richard Fuchs <rfuchs at sipwise.com>
Organisation: Sipwise GmbH
Reply to: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org>
Date: Friday, 4 March 2022 at 12:10 am
To: "sr-users at lists.kamailio.org" <sr-users at lists.kamailio.org>
Subject: Re: [SR-Users] rtpengine - SRTP <> RTP missing a=crypto
Are there multiple branches involved? Is the same invite being processed (and manipulated by rtpengine) multiple times, perhaps with different options (e.g. once for RTP and once for SRTP)?
Cheers
On 03/03/2022 06.07, [EXT] Rhys Hanrahan wrote:
Hi Everyone,
I have Kamailio sitting between MS Teams and Asterisk, and using rtpengine to terminate SRTP on Kamailio so that all my internal traffic is unencrypted. My current config works fine for inbound calls where I initiate the INVITE and Teams responds, but if Teams sends the INVITE I am having an issue where SRTP cannot finish negotiating. Non SRTP calls work fine with RTPEngine as well, so it’s just the RTP to SRTP I am struggling with.
According to this I believe I must pass a=crypto in response to the INVITE which also has a=crypto: https://www.dialogic.com/-/media/1f8b54b43087407d9c2b38846c5c2cb5.ashx?h=408&w=622
You can see that in the initial invite from Teams, I get RTP/SAVP with a=crypto, but I do not send one in my OK response after 183 Session In Progress. As below – I am wondering if it’s because not all audio channels seem to be getting swapped to SAVP?
I’d like to do a generic SRTP <> RTP bridge config (I’ve tried below). However, I am not 100% sure on how to detect when to swap between AVP and SAVP, so I’ve also tried just doing rtpengine_manage() and relying on other code to swap between SAVP or AVP *only* when going to/from Teams to keep it simple. I also tried both with and without “replace-origin replace-session-connection ICE=remove” but I still get the same behaviour in all cases.
Any advice appreciated, as this is my first time dealing with SRTP (and rtpengine). Feeling very stuck. Thanks!
branch_route[MANAGE_BRANCH] {
…
route(NATMANAGE);
route(HANDLE_SRTP);
}
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if(status=~"[12][0-9][0-9]") {
route(NATMANAGE);
}
route(HANDLE_SRTP);
}
route[HANDLE_SRTP] {
if (!has_body("application/sdp")) {
return;
}
rtpengine_manage();
return; # As a test, just do rtpengine_manage() and set SAVP/AVP elsewhere. Same behaviour.
# Handle bridging of RTP and SRTP
# Inbound traffic to SBC should be converted from SRTP to RTP
if (proto==TLS) {
rtpengine_manage("RTP/AVP");
# Outbound traffic destined to a TLS destination should be converted from RTP to SRTP
} else if ($ru =~ "transport=tls") {
rtpengine_manage("RTP/SAVP");
}
}
# INVITE from teams
rtpengine_manage("replace-origin replace-session-connection ICE=remove RTP/AVP");
# INVITE to teams
rtpengine_manage("replace-origin replace-session-connection ICE=remove RTP/SAVP");
INVITE sip:+614xxxx at rh.sbc-syd-01.teams.xxxx:5061;user=phone;transport=tls SIP/2.0^M
…
v=0^M
o=- 57931 0 IN IP4 127.0.0.1^M
s=session^M
c=IN IP4 52.113.76.53^M
b=CT:10000000^M
t=0 0^M
m=audio 51398 RTP/SAVP 104 9 103 111 18 0 8 97 101 13 118^M
c=IN IP4 52.113.76.53^M
a=rtcp:51399^M
a=ice-ufrag:C8ss^M
a=ice-pwd:2bV9D6GcXF5f8m0px/wufQD/^M
a=rtcp-mux^M
a=candidate:1 1 UDP 2130706431 52.113.76.53 51398 typ srflx raddr 10.0.32.179 rport 51398^M
a=candidate:1 2 UDP 2130705918 52.113.76.53 51399 typ srflx raddr 10.0.32.179 rport 51399^M
a=candidate:2 1 tcp-act 2121006078 52.113.76.53 49152 typ srflx raddr 10.0.32.179 rport 49152^M
a=candidate:2 2 tcp-act 2121006078 52.113.76.53 49152 typ srflx raddr 10.0.32.179 rport 49152^M
a=label:main-audio^M
a=mid:1^M<mid:1%5eM>
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:geUHLB1mshmnI5hN83bnO57Hbdm2i7dD14sDAnpA|2^31^M
a=sendrecv^M
a=rtpmap:104 SILK/16000^M
a=rtpmap:9 G722/8000^M
a=rtpmap:103 SILK/8000^M
a=rtpmap:111 SIREN/16000^M
a=fmtp:111 bitrate=16000^M
a=rtpmap:18 G729/8000^M
a=fmtp:18 annexb=no^M
a=rtpmap:0 PCMU/8000^M
a=rtpmap:8 PCMA/8000^M
a=rtpmap:97 RED/8000^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-16^M
a=rtpmap:13 CN/8000^M
a=rtpmap:118 CN/16000^M
a=ptime:20^M
I correctly convert to/from RTP/AVP and RTP/SAVP for the 183 Session in progress. It is RTP/SAVP before going to Teams:
SIP/2.0 183 Session Progress^M
…
v=0^M
o=- 57931 2 IN IP4 1.2.3.4^M
s=NexusOne^M
c=IN IP4 1.2.3.4^M
t=0 0^M
m=audio 37820 RTP/SAVP 9 8 0 101^M
a=maxptime:150^M
a=mid:1^M<mid:1%5eM>
a=rtpmap:9 G722/8000^M
a=rtpmap:8 PCMA/8000^M
a=rtpmap:0 PCMU/8000^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-16^M
a=sendrecv^M
a=rtcp:37821^M
a=ptime:20^M
m=audio 0 RTP/AVP 104 9 103 111 18 0 8 97 101 13 118^M
m=audio 0 RTP/AVP 104 9 103 111 18 0 8 97 101 13 118^M
But then when I send the OK after the 183, I am setting RTP/SAVP before sending to MS Teams, but not setting a=crypto:
Also note that I can see there are _some_ channels still as RTP/AVP so maybe this is part of the issue.
SIP/2.0 200 OK^M
…
v=0^M
o=- 57931 2 IN IP4 1.2.3.4^M
s=NexusOne^M
c=IN IP4 1.2.3.4^M
t=0 0^M
m=audio 37820 RTP/SAVP 9 8 0 101^M
a=maxptime:150^M
a=mid:1^M<mid:1%5eM>
a=rtpmap:9 G722/8000^M
a=rtpmap:8 PCMA/8000^M
a=rtpmap:0 PCMU/8000^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-16^M
a=sendrecv^M
a=rtcp:37821^M
a=ptime:20^M
m=audio 0 RTP/AVP 104 9 103 111 18 0 8 97 101 13 118^M
m=audio 0 RTP/AVP 104 9 103 111 18 0 8 97 101 13 118^M
Rhys Hanrahan | Chief Information Officer
e: rhys at nexusone.com.au<mailto:rhys at nexusone.com.au>
[www.nexusone.com.au]<http://www.nexusone.com.au/> [signature_1116663581] <http://www.fusiontech.com.au/>
NEXUS ONE | FUSION TECHNOLOGY SOLUTIONS
p: 1800 NEXUS1 (1800 639 871) or 1800 565 845 | a: Suite 12.03 Level 12, 227 Elizabeth Street, Sydney NSW 2000
www.nexusone.com.au<http://www.nexusone.com.au/> | www.fusiontech.com.au<http://www.fusiontech.com.au/>
The information in this email and any accompanying attachments may contain; a. Confidential information of Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd or third parties; b. Legally privileged information of Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd or third parties; and or c. Copyright material Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd or third parties. If you have received this email in error, please notify the sender immediately and delete this message. Fusion Technology Solutions Pty Ltd, Nexus One Pty Ltd does not accept any responsibility for loss or damage arising from the use or distribution of this email.
Please consider the environment before printing this email.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220303/a3432078/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 13849 bytes
Desc: image001.png
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220303/a3432078/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 9101 bytes
Desc: image002.png
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220303/a3432078/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 13850 bytes
Desc: image003.png
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220303/a3432078/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 9102 bytes
Desc: image004.png
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220303/a3432078/attachment-0003.png>
More information about the sr-users
mailing list