[SR-Users] Kamailio Inbound proxy to Asterisk - ACL Filtering

[Mihai Cezar]

But is there something that I can do in kamailio to send the original
IP to an asterisk server like in http with the XFF header?

On Mon, Oct 11, 2021 at 1:29 AM David Villasmil
<david.villasmil.work at gmail.com> wrote:
>
> Hello, this is really an Asterisk question.
> Here in Kamailio we'd recommend you do that filtering at the proxy level, using the "permissions" module.
>
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
>
>
> On Sun, Oct 10, 2021 at 6:52 PM Mihai Cezar <cezar at mokalife.ro> wrote:
>>
>> Hi,
>>
>> The last matching rule is the one used. If no rule matches, then the
>> connection is permitted.
>>
>> Example:
>> deny=0.0.0.0/0.0.0.0
>> permit=1.2.3.4/32
>> Deny every address except for the only one allowed.
>>
>> Basically the rules are processed from the first to the last.
>>
>> On Sat, Oct 9, 2021 at 3:26 PM Bugaian A. Vitalie <bugaian at gmail.com> wrote:
>> >
>> > Hi,
>> >
>> > I think its the order you apply the ACL, first permit some, then deny any?
>> >
>> > Vitalie.
>> >
>> > On Sat, Oct 9, 2021 at 1:58 PM Mihai Cezar <cezar at mokalife.ro> wrote:
>> >>
>> >> Hello,
>> >>
>> >> I have an issue with filtering on the asterisk side, my requests are:
>> >> UsersPhones(bria) -> Kamailio -> Asterisk -> Sip Trunk Out.
>> >>
>> >> The goal is to manage a new layer of protection ( IP filtering / Whitelisting ).
>> >> When I try to compile a list of Whitelisted IP in sip.conf I get this error:
>> >>
>> >> NOTICE[205]: acl.c:748 ast_apply_acl: SIP contact ACL: Rejecting
>> >> '145.72.23.45' due to a failure to pass ACL '(BASELINE)'
>> >> WARNING[205]: chan_sip.c:17061 parse_register_contact: Domain
>> >> '5.12.16.2:48669' disallowed by contact ACL (violating IP
>> >> 145.72.23.45)
>> >> WARNING[205]: chan_sip.c:17933 register_verify: Registration denied
>> >> because of contact ACL
>> >>
>> >> The IP 145.72.23.45, is the proxy kamailio and if I added it to
>> >> sip.conf it works, but so does every ip afterwards.
>> >>
>> >> I tried with contactpermit also with permit, the result is the same as
>> >> long as I permit the proxy ip it works. Is there something that I can
>> >> do on the asterisk side to activate this filtering Or there is
>> >> something that I can do in Kamailio so it will forward the realip ?
>> >>
>> >> contactdeny=0.0.0.0/0.0.0.0
>> >> contactpermit=145.72.23.45/32
>> >> contactpermit=5.12.16.2/32
>> >>
>> >>
>> >> Thanks in advance,
>> >>
>> >> __________________________________________________________
>> >> Kamailio - Users Mailing List - Non Commercial Discussions
>> >>   * sr-users at lists.kamailio.org
>> >> Important: keep the mailing list in the recipients, do not reply only to the sender!
>> >> Edit mailing list options or unsubscribe:
>> >>   * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>> >
>> > __________________________________________________________
>> > Kamailio - Users Mailing List - Non Commercial Discussions
>> >   * sr-users at lists.kamailio.org
>> > Important: keep the mailing list in the recipients, do not reply only to the sender!
>> > Edit mailing list options or unsubscribe:
>> >   * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> __________________________________________________________
>> Kamailio - Users Mailing List - Non Commercial Discussions
>>   * sr-users at lists.kamailio.org
>> Important: keep the mailing list in the recipients, do not reply only to the sender!
>> Edit mailing list options or unsubscribe:
>>   * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
>   * sr-users at lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only to the sender!
> Edit mailing list options or unsubscribe:
>   * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users