[SR-Users] Kamailio 4.4 + rtpproxy behind the NAT (debian stretch 9.13)

Youssef Boujraf yboujraf at gmail.com
Fri Oct 1 13:00:36 CEST 2021


Dear,

I am testing the kakamilio 4.4 with rtpproxy on Debian stretch 9.13
I have installed the packages

   - apt-get install kamailio and rtpproxy.


   - kamailio 4.4


   - rtpproxy Basic version: 20040107


*My version of RTPPROXY doesn't have the -A parameter so that means without
advertising there is no way to work behind NAT? That is what I have
understood after spending one week on forums. Thanks if somebody could
confirm otherwise, which way I need to go to figure out my issue?*

# rtpproxy -v
> Basic version: 20040107
> Extension 20050322: Support for multiple RTP streams and MOH
> Extension 20060704: Support for extra parameter in the V command
> Extension 20071116: Support for RTP re-packetization
> Extension 20071218: Support for forking (copying) RTP stream
> Extension 20080403: Support for RTP statistics querying
> Extension 20081102: Support for setting codecs in the update/lookup command
> Extension 20081224: Support for session timeout notifications
>


> # rtpproxy -help
> rtpproxy: invalid option -- 'h'
> usage: rtpproxy [-2fvFiPa] [-l addr1[/addr2]] [-6 addr1[/addr2]] [-s path]
>         [-t tos] [-r rdir [-S sdir]] [-T ttl] [-L nfiles] [-m port_min]
>         [-M port_max] [-u uname[:gname]] [-n timeout_socket] [-d
> log_level[:log_facility]]
> #
>

/etc/hosts

127.0.0.1       localhost
> 127.0.1.1       sip.dom.xx sip
> 192.168.1.19    sip.dom.xx sip
> PUBLIC_IP   sip.dom.xx sip
> # The following lines are desirable for IPv6 capable hosts
> ::1     localhost ip6-localhost ip6-loopback
> ff02::1 ip6-allnodes
> ff02::2 ip6-allrouters
>

*/etc/kamailio/kamailio.cfg*
kamailio.config

> #!define PUBLIC_IP "xxx.xxx.xxx.xxx"
> #!define PRIVATE_IP "192.168.1.19"
> #!define PRIVATE_NET "192.168.1.0/24“
>
listen=udp:PRIVATE_IP:5060 advertise PUBLIC_IP:5060
>

>
#!ifdef WITH_NAT
>
> # ----- rtpproxy params -----
>
> modparam("rtpproxy", "rtpproxy_sock", "udp:PRIVATE_IP:7722")
>
>
> # ----- nathelper params -----
>
> modparam("nathelper", "natping_interval", 30)
>
> modparam("nathelper", "ping_nated_only", 1)
>
> modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
>
> modparam("nathelper", "sipping_from", "sip:pinger at kamailio.org")
>

*Etc/default/rtpproxy*


PRIVATE_IP=192.168.1.19
>
> PUBLIC_IP=xxx.xxx.xxx.xxx
>
> rtpport_min= 10000
>
> rtpport_max=20000
>
> syslog=DBUG:LOG_LOCAL5
>
> #Defaults for rtpproxy
> #The control socket.
> #CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"
> #To listen on an UDP socket, uncomment this line:
> #CONTROL_SOCK=udp:127.0.0.1:7722
> #Additional options that are passed to the daemon.
> EXTRA_OPTS="-l $PRIVATE_IP/$PUBLIC_IP ="-s $PRIVATE_IP:7222 -m $
> rtpport_min -M $rtpport_max -d $syslog"`
>

Thanks if you could route me to the right way.

Best regards

Yboujraf
Email: yboujraf at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20211001/5fcbccc6/attachment.htm>


More information about the sr-users mailing list