[SR-Users] What does "tls.reload" actually do?

Sebastian Damm sdamm at pascom.net
Mon Aug 30 13:39:26 CEST 2021


Hi,

I suppose, it happens for real connections, too. But since it's so sporadically, I guess, clients just retry and then it works.

The operating system is an Ubuntu 18.04 (getting replaced by Ubuntu 20.04 soon), thus it's running with libssl 1.1.1.

Regards,
Sebastian

----- Ursprüngliche Mail -----
Von: "miconda" <miconda at gmail.com>
An: "sr-users" <sr-users at lists.kamailio.org>, "Sebastian Damm" <sdamm at pascom.net>
Gesendet: Montag, 30. August 2021 13:28:04
Betreff: Re: [SR-Users] What does "tls.reload" actually do?

Hello,

does it happen only for connections done by the monitoring system? Or
also for the connections tried from the usual sip phones?

What is the operating system and libssl version?

Cheers,
Daniel

On 30.08.21 11:57, Sebastian Damm wrote:
> Hi Henning,
>
> unfortunately, I don't have a host without traffic showing the same behavior. Our dev hosts usually don't run long enough. (And they usually don't get monitored.)
>
> The "sporadically" meant, that it can take sometimes up to one week until it occurs on the same host again. And yes, some hosts have a bit more traffic than others, I suppose that's why it occurs earlier on some hosts, later on others.
>
> I guess we have to deploy updates more often. ;)
>
> Regards,
> Sebastian
>
> ----- Ursprüngliche Mail -----
> Von: "Henning Westerholt" <hw at skalatan.de>
> An: "sr-users" <sr-users at lists.kamailio.org>
> CC: "Sebastian Damm" <sdamm at pascom.net>
> Gesendet: Dienstag, 24. August 2021 14:21:31
> Betreff: RE: What does "tls.reload" actually do?
>
> Hello Sebastian,
>
> on a first look to the code the tls.reload does similar operations as done during normal server startup, like
> - load configuration
> - fixing domains
> - check sockets
>
> If the error only happens sporadic and, on some servers, it is probably either an error that only occurs in specific circumstances unrelated to kamailio, or some internal corruption topic in the module/server.
>
> Do you see it also on e.g., test systems without any real load? Is there a difference between the systems in kind of load, and this maybe also causes some difference when the error occurs?
>
> Cheers,
>
> Henning
>
> -- 
> Henning Westerholt - https://skalatan.de/blog/
> Kamailio services - https://gilawa.com 
>
> -----Original Message-----
> From: sr-users <sr-users-bounces at lists.kamailio.org> On Behalf Of Sebastian Damm
> Sent: Tuesday, August 24, 2021 1:58 PM
> To: sr-users <sr-users at lists.kamailio.org>
> Subject: [SR-Users] What does "tls.reload" actually do?
>
> Hi,
>
> I noticed a strange behavior on some of our proxy servers, all running Kamailio 5.3.8. After running for some time (weeks), our monitoring system sporadically starts reporting errors. The check connects via tls and registers to an Asterisk behind the proxy server. When this happens, the Kamailio log shows the following line:
>
> ERROR: tls [tls_util.h:42]: tls_err_ret(): TLS accept:error:1409441B:SSL routines:ssl3_read_bytes:tlsv1 alert decrypt error
>
> When restarting Kamailio, the problem goes away only to come back after some weeks uptime again.
>
> On one host, I tried to find something using kamcmd, and I don't know why but I also issued "tls.reload". And from that point, the monitoring system has not reported the system as faulty anymore. I repeated the same thing on other hosts when the problem occured there, all with the same result. "tls.reload" helps. But from the documentation, I don't know why.
>
> Does anybody have an explanation for it?
>
> Regards,
> Sebastian
>
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
>   * sr-users at lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only to the sender!
> Edit mailing list options or unsubscribe:
>   * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
>   * sr-users at lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only to the sender!
> Edit mailing list options or unsubscribe:
>   * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda/



More information about the sr-users mailing list