[SR-Users] Integration with multiple MS Teams instances
Володимир Іванець
volodyaivanets at gmail.com
Fri Aug 6 14:53:54 CEST 2021
Or maybe some special "id" to tell Kamailio to skip the verification and
just create a new connection? Then I could use the real "id" for further
outbound traffic.
Thank you!
Regards, Volodymyr Ivanets.
пт, 6 серп. 2021 о 15:45 Володимир Іванець <volodyaivanets at gmail.com> пише:
> Hello Daniel!
>
> Thank you for the suggestion. Unfortunately adding the
> "tcp_connection_match=1" did not made a difference. Kamailio found other
> connection to the same peer and used it instead:
>
> *<core> [core/tcp_main.c:1610]: _tcpconn_find(): found connection by peer
> address (id: 2)*
>
> Also, it looks like the answer is in this comment:
> https://github.com/kamailio/kamailio/blob/master/src/core/tcp_main.c#L1563.
> And below are active tls connections for the previous trunk. Is there a way
> to add an additional field like a "tag" that could be used in peer matching
> as well? Otherwise, I guess the only option I have is to run separate
> instances of Kamailio with a very basic configuration for each MS Teams
> connection.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *# kamcmd tls.list{ id: 2 timeout: 0 src_ip:
> 52.114.75.24 src_port: 5061 dst_ip: 172.16.30.206
> dst_port: 0 cipher: ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH
> Au=RSA Enc=AESGCM(256) Mac=AEAD ct_wq_size: 0 enc_rd_buf: 0
> flags: 2 state: established}{ id: 3 timeout: 0
> src_ip: 52.114.75.24 src_port: 6272 dst_ip:
> 172.16.30.206 dst_port: 5063 cipher: AES256-GCM-SHA384
> TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(256) Mac=AEAD ct_wq_size: 0
> enc_rd_buf: 0 flags: 2 state: established}{ id:
> 4 timeout: 581 src_ip: 52.114.75.24 src_port: 6273
> dst_ip: 172.16.30.206 dst_port: 5063 cipher:
> AES256-GCM-SHA384 TLSv1.2 Kx=RSA Au=RSA Enc=AESGCM(256)
> Mac=AEAD ct_wq_size: 0 enc_rd_buf: 0 flags: 2
> state: established*
> *} *
>
> Thank you!
>
> Regards, Volodymyr Ivanets.
>
> ср, 4 серп. 2021 о 13:45 Daniel-Constantin Mierla <miconda at gmail.com>
> пише:
>
>> Hello,
>>
>> can you set
>> https://www.kamailio.org/wiki/cookbooks/5.5.x/core#tcp_connection_match ?
>>
>> It may work only for connections accepted by Kamailio, but worth a try.
>>
>> Cheers,
>> Daniel
>> On 03.08.21 14:48, Володимир Іванець wrote:
>>
>> Hello Daniel,
>>
>> Yes, I have "socket=tls:172.16.30.206:5062" and "socket=tls:
>> 172.16.30.206:5063" attributes for corresponding records in the
>> Dispatcher configuration table. $fs prints out correct values in the
>> "event_route[tm:local-request]".
>>
>> But I thought that TCP/TLS connections are established from a random port
>> to a destination port on the peer side. And then the remote peer connects
>> from its random port to our port 5062/5063.
>>
>> If understood Kamailio log correctly when it is about to establish a
>> second connection to the same peer it sees an active connection for the
>> previous trunk and uses it instead of creating a new one.
>>
>> Thank you!
>>
>> Regards, Volodymyr Ivanets.
>>
>> пн, 2 серп. 2021 о 22:21 Daniel-Constantin Mierla <miconda at gmail.com>
>> пише:
>>
>>> Hello,
>>>
>>> do you force local send socket?
>>>
>>> Cheers,
>>> Daniel
>>> On 02.08.21 18:21, Володимир Іванець wrote:
>>>
>>> Hello Daniel!
>>>
>>> I updated Kamailio to the latest released version. The problem is that
>>> still with tls_set_connect_server_id() I can not make a single instance of
>>> Kamailio connect to multiple MS Teams domains. I use a single IP address
>>> with different ports for different trunks. I can see it establishing a
>>> connection to one trunk and using it for other domains.
>>>
>>> Is there a way to force Kamailio to make a new TLS connection to the
>>> same peer address that it is already connected to?
>>>
>>> Thank you!
>>>
>>> Regards, Volodymyr Ivanets.
>>>
>>> пн, 2 серп. 2021 о 13:44 Daniel-Constantin Mierla <miconda at gmail.com>
>>> пише:
>>>
>>>> Hello,
>>>>
>>>> upgrading is the recommended way, indeed, if you want to use
>>>> tls_set_connect_server_id(). For older version you may want to try looping
>>>> back to kamailio (can be over udp) and the use the xavps. Adds some
>>>> overhead and hops, but if you are stuck to a version and can't really
>>>> upgrade soon, might be an option to look at.
>>>>
>>>> Cheers,
>>>> Daniel
>>>> On 29.07.21 18:48, Володимир Іванець wrote:
>>>>
>>>> Hello Rob!
>>>>
>>>> Yes, I'm using Letsencrypt while I'm testing. But I would like to be
>>>> able to use different certificates with different sockets.
>>>>
>>>> I found this discussion
>>>> https://github.com/kamailio/kamailio/issues/2413. Looks like I need to
>>>> use "tls_set_connect_server_id()" instead of setting
>>>> $xavp(tls=>server_name)" and "$xavp(tls[0]=>server_id)". Unfortunately I'm
>>>> currently using Kamailio v5.4 on my test system and this function is not
>>>> available. I will update Kamailio and give it another try. Then I will
>>>> update everyone in the hope it will be useful for someone :)
>>>>
>>>> Thank you!
>>>>
>>>> Regards, Volodymyr Ivanets
>>>>
>>>> чт, 29 лип. 2021 о 19:07 Rob van den Bulk <rob.van.den.bulk at gmail.com>
>>>> пише:
>>>>
>>>>> Hello, are u using letsencrypt?
>>>>>
>>>>> U can use a multi domain.
>>>>>
>>>>> Muti domain names in one certificate
>>>>>
>>>>> Outlook voor Android <https://aka.ms/AAb9ysg> downloaden
>>>>> ------------------------------
>>>>> *From:* sr-users <sr-users-bounces at lists.kamailio.org> on behalf of
>>>>> Володимир Іванець <volodyaivanets at gmail.com>
>>>>> *Sent:* Thursday, July 29, 2021 4:44:16 PM
>>>>> *To:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org
>>>>> >
>>>>> *Subject:* [SR-Users] Integration with multiple MS Teams instances
>>>>>
>>>>> Hello all!
>>>>>
>>>>> I was able to connect Kamailio with MS Teams and now trying to add one
>>>>> more Teams instance. It looks like I have some misconfiguration or there is
>>>>> a bug.
>>>>>
>>>>> My test server has 2 domain records pointing at it (
>>>>> kamailio.domain1.com and kamailio.domain2.com). My tls.cfg
>>>>> configuration file looks like this. As you can see the Default section is
>>>>> configured with a kamailio.domain1.com sertificate:
>>>>>
>>>>> *[server:default]*
>>>>> *method = TLSv1.0+*
>>>>> *require_certificate = no*
>>>>> *verify_certificate = no*
>>>>> *private_key =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/key.pem
>>>>> <http://kamailio.domain1.com/server/key.pem>*
>>>>> *certificate =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
>>>>> <http://kamailio.domain1.com/server/cert.pem>*
>>>>> *ca_list = /var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
>>>>> <http://kamailio.domain1.com/CA/cert.pem>*
>>>>>
>>>>>
>>>>> *[client:default]*
>>>>> *method = TLSv1.0+*
>>>>> *require_certificate = no*
>>>>> *verify_certificate = no*
>>>>> *private_key =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/key.pem
>>>>> <http://kamailio.domain1.com/server/key.pem>*
>>>>> *certificate =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
>>>>> <http://kamailio.domain1.com/server/cert.pem>*
>>>>> *ca_list = /var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
>>>>> <http://kamailio.domain1.com/CA/cert.pem>*
>>>>>
>>>>>
>>>>>
>>>>> *[server:172.16.30.206:5062 <http://172.16.30.206:5062>]*
>>>>> *method = TLSv1.0+*
>>>>> *require_certificate = no*
>>>>> *verify_certificate = no*
>>>>> *private_key =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/key.pem
>>>>> <http://kamailio.domain1.com/server/key.pem>*
>>>>> *certificate =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
>>>>> <http://kamailio.domain1.com/server/cert.pem>*
>>>>> *ca_list = /var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
>>>>> <http://kamailio.domain1.com/CA/cert.pem>*
>>>>> *server_name = "kamailio.domain1.com <http://kamailio.domain1.com>"*
>>>>> *server_id = "**"kamailio.domain1.com <http://kamailio.domain1.com>"*
>>>>>
>>>>>
>>>>> *[client:172.16.30.206:5062 <http://172.16.30.206:5062>]*
>>>>> *method = TLSv1.0+*
>>>>> *require_certificate = no*
>>>>> *verify_certificate = no*
>>>>> *private_key =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/key.pem
>>>>> <http://kamailio.domain1.com/server/key.pem>*
>>>>> *certificate =
>>>>> /var/kamailio/certificates/kamailio.domain1.com/server/cert.pem
>>>>> <http://kamailio.domain1.com/server/cert.pem>*
>>>>> *ca_list = /var/kamailio/certificates/kamailio.domain1.com/CA/cert.pem
>>>>> <http://kamailio.domain1.com/CA/cert.pem>*
>>>>>
>>>>>
>>>>>
>>>>> *[server:172.16.30.206:5063 <http://172.16.30.206:5063>]*
>>>>> *method = TLSv1.0+*
>>>>> *require_certificate = no*
>>>>> *verify_certificate = no*
>>>>> *private_key =
>>>>> /var/kamailio/certificates/kamailio.domain2.com/server/key.pem
>>>>> <http://kamailio.domain2.com/server/key.pem>*
>>>>> *certificate =
>>>>> /var/kamailio/certificates/kamailio.domain2.com/server/cert.pem
>>>>> <http://kamailio.domain2.com/server/cert.pem>*
>>>>> *ca_list = /var/kamailio/certificates/kamailio.domain2.com/CA/cert.pem
>>>>> <http://kamailio.domain2.com/CA/cert.pem>*
>>>>> *server_name = "kamailio.domain2.com <http://kamailio.domain2.com>"*
>>>>>
>>>>> *server_id = "**"kamailio.domain2.com <http://kamailio.domain2.com>"*
>>>>>
>>>>>
>>>>> *[client:172.16.30.206:5063 <http://172.16.30.206:5063>]*
>>>>> *method = TLSv1.0+*
>>>>> *require_certificate = no*
>>>>> *verify_certificate = no*
>>>>> *private_key =
>>>>> /var/kamailio/certificates/kamailio.domain2.com/server/key.pem
>>>>> <http://kamailio.domain2.com/server/key.pem>*
>>>>> *certificate =
>>>>> /var/kamailio/certificates/kamailio.domain2.com/server/cert.pem
>>>>> <http://kamailio.domain2.com/server/cert.pem>*
>>>>> *ca_list = /var/kamailio/certificates/kamailio.domain2.com/CA/cert.pem
>>>>> <http://kamailio.domain2.com/CA/cert.pem>*
>>>>>
>>>>>
>>>>> The dispatcher configuration table looks like this:
>>>>>
>>>>>
>>>>> +----+-------+----------------------------------------------+-------+----------+--------------------------------------------------------------------+-------------+
>>>>> | id | setid | destination | flags |
>>>>> priority | attrs
>>>>> | description |
>>>>>
>>>>> +----+-------+----------------------------------------------+-------+----------+--------------------------------------------------------------------+-------------+
>>>>> | 1 | 1 | sip:sip.pstnhub.microsoft.com;transport=tls | 0 |
>>>>> 3 | socket=tls:172.16.30.206:5062;ping_from=sip:
>>>>> kamailio.domain1.com | MS Teams 1 |
>>>>> | 2 | 2 | sip:sip.pstnhub.microsoft.com;transport=tls | 0 |
>>>>> 3 | socket=tls:172.16.30.206:5063;ping_from=sip:
>>>>> kamailio.domain2.com | MS Teams 2 |
>>>>>
>>>>> +----+-------+----------------------------------------------+-------+----------+--------------------------------------------------------------------+-------------+
>>>>>
>>>>>
>>>>>
>>>>> When Kamailio is started only connection with the first trunk is
>>>>> established:
>>>>>
>>>>> *# kamcmd tls.list*
>>>>> *{*
>>>>> * id: 1*
>>>>> * timeout: 0*
>>>>> * src_ip: 52.114.75.24*
>>>>> * src_port: 5061*
>>>>> * dst_ip: 172.16.30.206*
>>>>> * dst_port: 0*
>>>>> * cipher: ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH
>>>>> Au=RSA Enc=AESGCM(256) Mac=AEAD*
>>>>> * ct_wq_size: 0*
>>>>> * enc_rd_buf: 0*
>>>>> * flags: 2*
>>>>> * state: established*
>>>>> *}*
>>>>> *{*
>>>>> * id: 2*
>>>>> * timeout: 0*
>>>>> * src_ip: 52.114.75.24*
>>>>> * src_port: 7810*
>>>>> * dst_ip: 172.16.30.206*
>>>>> * dst_port: 5062*
>>>>> * cipher: AES256-GCM-SHA384 TLSv1.2 Kx=RSA Au=RSA
>>>>> Enc=AESGCM(256) Mac=AEAD*
>>>>> * ct_wq_size: 0*
>>>>> * enc_rd_buf: 0*
>>>>> * flags: 2*
>>>>> * state: established*
>>>>> *}*
>>>>> *{*
>>>>> * id: 3*
>>>>> * timeout: 596*
>>>>> * src_ip: 52.114.75.24*
>>>>> * src_port: 7811*
>>>>> * dst_ip: 172.16.30.206*
>>>>> * dst_port: 5062*
>>>>> * cipher: AES256-GCM-SHA384 TLSv1.2 Kx=RSA Au=RSA
>>>>> Enc=AESGCM(256) Mac=AEAD*
>>>>> * ct_wq_size: 0*
>>>>> * enc_rd_buf: 0*
>>>>> * flags: 2*
>>>>> * state: established*
>>>>> *}*
>>>>>
>>>>>
>>>>> Here is what I can see in Kamailio log file when it sends an OPTIONS
>>>>> request to the second trunk. Kamailio uses Default tls configuration and MS
>>>>> Teams don't accept it:
>>>>>
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: ALERT: <script>:
>>>>> == TRACE. tm:local-request. fs is tls:172.16.30.206:5063
>>>>> <http://172.16.30.206:5063>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tm
>>>>> [uac.c:352]: t_run_local_req(): apply new updates without Via to sip msg*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/msg_translator.c:1796]: check_boundaries(): no multi-part body*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:610]: parse_msg(): SIP Request:*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:612]: parse_msg(): method: <OPTIONS>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:614]: parse_msg(): uri:
>>>>> <sip:sip.pstnhub.microsoft.com
>>>>> <http://sip.pstnhub.microsoft.com>;transport=tls>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:616]: parse_msg(): version: <SIP/2.0>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/parse_via.c:1303]: parse_via_param(): Found param type 232,
>>>>> <branch> = <z9hG4bK169b.6411b4c3000000000000000000000000.0>; state=16*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/parse_via.c:2639]: parse_via(): end of header reached, state=5*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:498]: parse_headers(): Via found, flags=2*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:500]: parse_headers(): this is the first via*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/parse_addr_spec.c:864]: parse_addr_spec(): end of header
>>>>> reached, state=10*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:171]: get_hdr_field(): <To> [47];
>>>>> uri=[sip:sip.pstnhub.microsoft.com
>>>>> <http://sip.pstnhub.microsoft.com>;transport=tls]*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:174]: get_hdr_field(): to body
>>>>> (47)[<sip:sip.pstnhub.microsoft.com
>>>>> <http://sip.pstnhub.microsoft.com>;transport=tls>^M*
>>>>> *], to tag (0)[]*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:152]: get_hdr_field(): cseq <CSeq>: <10>
>>>>> <OPTIONS>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:185]: get_hdr_field(): content_length=0*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:89]: get_hdr_field(): found end of header*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:610]: parse_msg(): SIP Request:*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:612]: parse_msg(): method: <OPTIONS>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:614]: parse_msg(): uri:
>>>>> <sip:sip.pstnhub.microsoft.com
>>>>> <http://sip.pstnhub.microsoft.com>;transport=tls>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:616]: parse_msg(): version: <SIP/2.0>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/parse_via.c:1303]: parse_via_param(): Found param type 232,
>>>>> <branch> = <z9hG4bK169b.6411b4c3000000000000000000000000.0>; state=16*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/parse_via.c:2639]: parse_via(): end of header reached, state=5*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:498]: parse_headers(): Via found, flags=2*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:500]: parse_headers(): this is the first via*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/parse_addr_spec.c:864]: parse_addr_spec(): end of header
>>>>> reached, state=10*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:171]: get_hdr_field(): <To> [47];
>>>>> uri=[sip:sip.pstnhub.microsoft.com
>>>>> <http://sip.pstnhub.microsoft.com>;transport=tls]*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:174]: get_hdr_field(): to body
>>>>> (47)[<sip:sip.pstnhub.microsoft.com
>>>>> <http://sip.pstnhub.microsoft.com>;transport=tls>^M*
>>>>> *], to tag (0)[]*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/parser/msg_parser.c:152]: get_hdr_field(): cseq <CSeq>: <10>
>>>>> <OPTIONS>*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tm
>>>>> [uac.c:189]: uac_refresh_hdr_shortcuts(): cseq: [CSeq: 10]*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/tcp_main.c:1993]: tcp_send(): no open tcp connection found, opening
>>>>> new one*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/ip_addr.c:229]: print_ip(): tcpconn_new: new tcp connection:
>>>>> 52.114.75.24*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/tcp_main.c:1175]: tcpconn_new(): on port 5061, type 3, socket -1*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: <core>
>>>>> [core/tcp_main.c:1498]: tcpconn_add(): hashes: 2831:67:0, 1*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tls
>>>>> [tls_server.c:199]: tls_complete_init(): completing tls connection
>>>>> initialization*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tls
>>>>> [tls_server.c:162]: tls_get_connect_server_name(): xavp with outbound
>>>>> server name not found*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tls
>>>>> [tls_server.c:142]: tls_get_connect_server_id(): xavp with outbound server
>>>>> id not found*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tls
>>>>> [tls_server.c:228]: tls_complete_init(): Using initial TLS domain
>>>>> TLSc<default> (dom 0x7f35509da688 ctx 0x7f3550b7a568 sn [])*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tls
>>>>> [tls_domain.c:1177]: tls_lookup_private_key(): Private key lookup for
>>>>> SSL_CTX-0x7f3550b7a568: (nil)*
>>>>> *Jul 29 16:46:14 kamailio /usr/sbin/kamailio[11809]: DEBUG: tls
>>>>> [tls_domain.c:747]: sr_ssl_ctx_info_callback(): SSL handshake started*
>>>>> *...*
>>>>>
>>>>>
>>>>> If I change the Default configuration to use kamailio.domain2.com
>>>>> certificate, the second trunk will connect but the first one will fail.
>>>>> I tried to set "$xavp(tls=>server_name)" and
>>>>> "$xavp(tls[0]=>server_id)" variables to the event_route[tm:local-request]
>>>>> section but log still stated that server Name and ID were not found.
>>>>>
>>>>> Can someone please point me in the right direction, how can I make
>>>>> Kamailio use the correct certificates when establishing multiple TLS
>>>>> connections?
>>>>>
>>>>> Thanks a lot!
>>>>>
>>>>> Regards, Volodymyr Ivanets
>>>>> __________________________________________________________
>>>>> Kamailio - Users Mailing List - Non Commercial Discussions
>>>>> * sr-users at lists.kamailio.org
>>>>> Important: keep the mailing list in the recipients, do not reply only
>>>>> to the sender!
>>>>> Edit mailing list options or unsubscribe:
>>>>> * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>>
>>>> __________________________________________________________
>>>> Kamailio - Users Mailing List - Non Commercial Discussions
>>>> * sr-users at lists.kamailio.org
>>>> Important: keep the mailing list in the recipients, do not reply only to the sender!
>>>> Edit mailing list options or unsubscribe:
>>>> * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>> --
>>>> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
>>>>
>>>> --
>>> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
>>>
>>> --
>> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20210806/9748ca37/attachment.htm>
More information about the sr-users
mailing list