[SR-Users] Kamailio does not forward BYE to Asterisk
egemen ulus
ulus_egemen at hotmail.com
Tue Sep 15 19:05:35 CEST 2020
Do I set the dlg_manage() function in the correct part of kamailio.cfg ?? I set it before sending Invite message to remote side.
Any help would be great :)
Regards
Egemen U.
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: sr-users <sr-users-bounces at lists.kamailio.org> on behalf of egemen ulus <ulus_egemen at hotmail.com>
Sent: Monday, September 14, 2020, 5:11 PM
To: Henning Westerholt; Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Kamailio does not forward BYE to Asterisk
Hi Henning,
Thank you for your response. I have checked with debug mode, here is the result; It can't find the dialog that is why it sends "404 Not Here" even though callid is the same.
Dialog that is kept in DB:
dialog memory records
dialog:: hash=1056:7783
state:: 4
ref_count:: 2
timestart:: 1600091398
timeout:: 90338404
callid:: 18f82088676a5d7f7c94e4f96c34a41f at asterisk_ip
from_uri:: sip:90850532xyzt at asterisk_ip
from_tag:: as00b3f8a9
caller_contact:: sip:908505326011 at asterisk_ip:5060
caller_cseq:: 102
caller_route_set::
caller_bind_addr:: udp:kamailio_ip:5060
callee_bind_addr:: udp:kamailio_ip:5060
to_uri:: sip:333305458596985 at remote_sipserver
to_tag:: as7cf5b3da
callee_contact:: sip:333305458596985@:remote_sipserver:5060
callee_cseq:: 0
callee_route_set:: <sip:remote_sipserver;lr>
Debug output for BYE message:
NOTICE: acc [acc.c:317]: acc_log_request(): ACC:
transaction answered: timestamp=1600091398;method=BYE;from_tag=as7cf5b3da;to_tag=as00b3f8a9;call_id=18f82088676a5d7f7c94e4f96c34a41f at asterisk_ip;code=404;reason=Not here;src_user=333305458596985;src_domain=remote_sipserver;src_ip=remote_sipserver;dst_ouser=90850532xyzt;dst_user=;dst_domain=kamailio_ip
Bye request header:
BYE sip:90850532xyzt at kamailio_ip SIP/2.0
And this is how I used dlg_manage() in Kamailio cfg (In RELAY):
if (src_ip == x.x.x.x/26) {
if (is_method("INVITE|ACK")) {
setflag(FLT_DLGINFO);
dlg_manage();
$var(x) = $tU;
$var(y) = $(var(x){s.striptail,11});
$var(recieved)='';
sql_pvquery("cb", "select ipaddress from prefixes where prefix = $var(y)", "$var(recieved)");
uac_replace_from("sip:$fU@$var(recieved)");
xlog("L_WARN","$var(recieved)\n");
remove_hf("Contact");
append_hf("Contact: <sip:$fU@$var(recieved)>\r\n", "Call-ID");
$fs = "udp:" + $var(recieved) + ":5060";
}
}
if (!t_relay()) {
sl_reply_error();
}
Regards
Egemen U.
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Henning Westerholt <hw at skalatan.de>
Sent: Monday, September 14, 2020 3:15:48 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Cc: egemen ulus <ulus_egemen at hotmail.com>
Subject: RE: Kamailio does not forward BYE to Asterisk
Hello Egemen,
have you tried to debug it and find out why the BYE is not routed in this particular case from Kamailio? You already mentioned the R-URI, what is in this particular BYE? Is Kamailio listening on all VLAN IPs? Just to share some ideas.
About the performance question, I know of some installation that have about 5-10 interfaces on a box and did not heard of problems so far.
The main topic to consider here (iMHO) is that it gets a bit complicated to handle many different interfaces in one kamailio, so for that reasons it might be a good idea to split it to different VMs or instances.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>
From: sr-users <sr-users-bounces at lists.kamailio.org> On Behalf Of egemen ulus
Sent: Friday, September 11, 2020 11:58 AM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: [SR-Users] Kamailio does not forward BYE to Asterisk
Hi all,
I have an infrastructure with Kamailio (reg), Asterisks farm, and Kamailio (4.3) proxy which dispatches calls.
Trunk-1 (Vlan_A)
Kam(reg) <> Asterisk Farm (5) <> Kam(proxy) <> Trunk-2 (Vlan_B)
Trunk-3 (Vlan_C)
For each trunk, I have to use the IP of the VLAN interface in "contact header". That means when I need to send a call to Trunk-1 I have to set Vlan_A IP address on the contact header. I have achieved that by rewriting Contact Header.
###
remove_hf("Contact:");
append_hf("Contact: <sip:$fU@$var(recieved)>\r\n", "Call-ID"); #by using db
###
But this causes a problem, Kamailio does not forward the BYE message that comes from Trunk-X to Asterisk (In before, the BYE message had Asterisk IP in R-URI). However, when I use topoh module it forward properly for one trunk. But I can not set multiple mask IP in topoh module.
I'm using the dialog module and I thought it can handle all requests in one dialog to forward to the correct asterisk but it did not.
Is there any suggestion for this case?
And also how many sub-interfaces can Kamailio handle for a good performance? Or do you suggest multiple Kamailio instances instead of multiple sub-interfaces on one server?
[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free. www.avast.com<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200915/91a05443/attachment.htm>
More information about the sr-users
mailing list