[SR-Users] RPC Socket stops answering after a few time.

[David VILLAUME]

Hi Daniel,

The patched worked correctly.

Big thanks.

Regards,
David

From: David VILLAUME
Sent: Sunday, June 28, 2020 12:16 PM
To: miconda at gmail.com; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: RE: [SR-Users] RPC Socket stops answering after a few time.

Hi,

Thanks a lot, the patch is in test, I‘ll be able to confirm you tomorrow.

Regards,
David

From: Daniel-Constantin Mierla <miconda at gmail.com<mailto:miconda at gmail.com>>
Sent: Tuesday, June 23, 2020 8:15 AM
To: David VILLAUME <david.villaume at sewan.fr<mailto:david.villaume at sewan.fr>>; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] RPC Socket stops answering after a few time.


Hello,

can you try with the patch from the commit:

 - https://github.com/kamailio/kamailio/commit/f4036c535033a333cb551b5af70703135305e7b3

If all works ok, then I will backport to stable branches.

Cheers,
Daniel
On 22.06.20 17:53, Daniel-Constantin Mierla wrote:

Hello,

I got the backtrace, I will analyse it and see what I find.

Cheers,
Daniel
On 19.06.20 14:09, David VILLAUME wrote:
Hello,

I just restarted the service I wait for another occurrence to perform it.

Regards,
David

From: Daniel-Constantin Mierla <miconda at gmail.com><mailto:miconda at gmail.com>
Sent: Friday, June 19, 2020 2:07 PM
To: David VILLAUME <david.villaume at sewan.fr><mailto:david.villaume at sewan.fr>; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org><mailto:sr-users at lists.kamailio.org>
Subject: Re: [SR-Users] RPC Socket stops answering after a few time.


Hello,

get the output of:

kamctl trap

You need gdb installed. The output is written a file, with the path to file printed by the command. Sent that file so we can investigate and see what each process is doing.

Cheers.
Daniel
On 19.06.20 13:53, David VILLAUME wrote:
Hello,

After a new check , can’t get answer, on the node for :  “kamctl rpc dlg.stats_active”

And I see in logs that about for dmq replicated calls (dialog [dialog.c:2400]: rpc_dlg_stats_active(): not active - state: 5) , disappear after the previous message appears.

After trying a “kamctl rpc dlg.stats_active”, I cannot even have answer to ‘kamctl rpc core.uptime’ anymore.

Have you any idea to go ahead with troubleshooting ?

Regards,
David

From: David VILLAUME
Sent: Thursday, June 18, 2020 3:31 PM
To: miconda at gmail.com<mailto:miconda at gmail.com>; Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org><mailto:sr-users at lists.kamailio.org>
Subject: RE: [SR-Users] RPC Socket stops answering after a few time.

Hello Daniel,

Thanks for your quick answer.

In fact I cannot even enter in kamcmd interactive mode after this happens.

Seems that “ kamctl rpc core.uptime “ can still do the job.

I’m using kamailio_exporter  with the following methods : tm.stats,sl.stats,core.shmmem,core.uptime,dispatcher.list,dlg.stats_active.

I haven’t process that requests longest data on the host, so I’m not sure if it can be related.

Regards,
David

From: Daniel-Constantin Mierla <miconda at gmail.com<mailto:miconda at gmail.com>>
Sent: Thursday, June 18, 2020 3:16 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>; David VILLAUME <david.villaume at sewan.fr<mailto:david.villaume at sewan.fr>>
Subject: Re: [SR-Users] RPC Socket stops answering after a few time.


Hello,

what is the command you run? Maybe the result is too big and you need to change the params for ctl module.

Or is it for all commands, including those printing small data, such case core.uptime?

You can also try the 'kamctl rpc COMMAND', which uses jsonrpcs, the error you pasted is from ctl module, used by kamcmd.

Cheers,
Daniel
On 18.06.20 15:00, David VILLAUME wrote:
Hello,

I’m having problem with RPC socket that stops answering after approximatively  one or two hours.

Version is 5.2.7

My principal host with exact same version and configuration has no problem, only the backup node (Keepalived + DMQ) encounters the problem.

I could catch this log about the problem, but didn’t find any reason for this :

Jun 18 10:53:33 sbc-kam-partner-b kamailio[83170]: ERROR: ctl [binrpc_run.c:600]: rpc_send(): ERROR: binrprc: rpc_send: send failed


My configuration about rpc :

loadmodule "jsonrpcs.so"
modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl")
modparam("ctl", "binrpc_max_body_size", 1024)


Do you have any idea to troubleshoot this ?

Regards,
David


_______________________________________________

Kamailio (SER) - Users Mailing List

sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>

https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

--

Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>

www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>

Funding: https://www.paypal.me/dcmierla

--

Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>

www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>

Funding: https://www.paypal.me/dcmierla

--

Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>

www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>

Funding: https://www.paypal.me/dcmierla

--

Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>

www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>

Funding: https://www.paypal.me/dcmierla
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200629/8784320c/attachment.html>