[SR-Users] Dispatcher does not go to 2nd server

Jurijs Ivolga jurijs.ivolga at gmail.com
Tue Jul 21 14:28:34 CEST 2020


Hi Aristedis,

Sorry, indeed you have module parameters.

When one asterisk is down what you see when you run:

kamcmd dispatcher.list

Jurijs


On Tue, Jul 21, 2020 at 3:19 PM Aristeidis Tsitras <tsitras at gmail.com>
wrote:

> i know that there is something wrong, but i can not figure it out.
> Especially for the modparam settings that Mr Jurijs Ivolga is proposing, I
> already had them. it is the kamailio.cfg that I originally attached.
>
> Unfortunately I did not manage to find anything in the parameters that
> will solve the problem as proposed by Villasmil and Semenov. I have given a
> try on changes but nothing good came up.
>
>
>
> Στις Τρί, 21 Ιουλ 2020 στις 2:48 μ.μ., ο/η Arsen Semenov <
> arsperger at gmail.com> έγραψε:
>
>> Hi Aristeidis,
>> David is right, first would be good to check the status of the
>> destinations.
>>
>> In your configuration there are couple of things to have in mind: need to
>> set correct flag param
>>
>> https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.flags
>> select the algorithm used to select the destination (ds_select_dst) and
>> have a faulure_route where the next destination will be tried in case first
>> is down.
>> You can find the examples in the module doc.
>>
>> Cheers,
>>
>> On Tue, Jul 21, 2020 at 4:11 PM Aristeidis Tsitras <tsitras at gmail.com>
>> wrote:
>>
>>> I have a Kamailio and 2 asterisk servers. All users are created in both
>>> of the asterisk servers. I am forwarding the registration to asterisk. The
>>> problem is that it is always used on only one server from the list. Even if
>>> one goes to shutdown, then there is not any registration sent to the
>>> available server. Even if *some *of the extensions can be seen
>>> registered in both of the asterisk's, if the secondary goes down, then
>>> there are no services for the phones.
>>>
>>> I am attaching the kamailio.cfg. My dispatch list is:
>>> 1 sip:192.168.0.100:5080 0 0 maxload=20
>>> 2 sip:192.168.0.101:5080 0 0 maxload=20
>>>
>>> In both of the asterisk servers i am using sip.conf to create users and
>>> s sip trunk for the Kamailio. Nothing special about it.
>>>
>>> I am looking to find what is wrong with my config and i cannot
>>> loadbalance/failover to the asterisk servers.
>>>
>>>
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users at lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>
>>
>> --
>> Arsen Semenov
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200721/2bac989a/attachment.htm>


More information about the sr-users mailing list