[SR-Users] KSR.sdpops.remove_media is not working as expected

Miteshkumar Thakkar mitesh.thakkar at plivo.com
Mon Jan 6 10:19:51 CET 2020


Thank you Henning.

does it actually remove the media after you send the message out? Usually
the message altering functions will only be applied when you send out the
message due to performance reasons.


Yes, that's true. When the message sent out, I can see that remove_media()
has actually removed that part from SDP.

So basically, when I am sending rtpengine_offer, SDP is not altered. What
should I do to alter SDP before calling rtpengine_offer?



On Fri, Dec 20, 2019 at 3:16 PM Miteshkumar Thakkar <
mitesh.thakkar at plivo.com> wrote:

> Hi,
>
> After removing media using below code, I am sending offer to rtpengine.
> RTPEngine is receiving entire SDP. It is receiving media type "image" as
> well. I have tested again.
>
> KSR.sdpops.remove_media("image")
> logger.log("info", "SDP:" .. headers.get("$sdp(body)"))
>
>
> *SDP from RTPEngine log:*
>
> =0
> o=zt 53655765 2353687637 IN IP4 xxx.xxx.xxx.xxx
> s=-
> c=IN IP4 xxx.xxx.xxx.xxx
> t=0 0
> m=image xxxx RTP/AVP udptl t38
> a=sendrecv
> a=T38FaxVersion:0
> a=T38MaxBitRate:14400
> a=T38FaxRateManagement:transferredTCF
> a=T38FaxMaxBuffer:262
> a=T38FaxMaxDatagram:176
> a=T38FaxUdpEC:t38UDPRedundancy
> m=audio xxxx RTP/AVP 0
> a=rtpmap:0 PCMU/8000
>
>
>
>
>
> On Thu, Dec 19, 2019 at 4:04 PM Henning Westerholt <hw at skalatan.de> wrote:
>
>> Hello,
>>
>>
>>
>> from the logs it looks ok, no error etc..:
>>
>>
>>
>> 3(237) DEBUG: app_lua [app_lua_sr.c:1651]: sr_kemi_lua_exec_func_ex():
>> param[0] for: remove_media is str: image
>>
>> 3(237) DEBUG: sdpops [sdpops_mod.c:1037]: sdp_remove_media(): attempting
>> to search for media type: [image]
>>
>> 3(237) DEBUG: sdpops [sdpops_mod.c:1053]: sdp_remove_media(): stream 0 of
>> 0 - media [image]
>>
>> 3(237) DEBUG: sdpops [sdpops_mod.c:1061]: sdp_remove_media(): removing
>> media stream: image
>>
>> 3(237) DEBUG: sdpops [sdpops_mod.c:1053]: sdp_remove_media(): stream 1 of
>> 0 - media [audio]
>>
>>
>>
>> This is probably a more frequest used function from the module. Can you
>> double check if it’s really not removed on the network layer?
>>
>>
>>
>> Cheers,
>>
>>
>>
>> Henning
>>
>>
>>
>> --
>>
>> Henning Westerholt – https://skalatan.de/blog/
>>
>> Kamailio services – https://gilawa.com
>>
>>
>>
>> *From:* Miteshkumar Thakkar <mitesh.thakkar at plivo.com>
>> *Sent:* Thursday, December 19, 2019 11:16 AM
>> *To:* Henning Westerholt <hw at skalatan.de>
>> *Cc:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
>> *Subject:* Re: [SR-Users] KSR.sdpops.remove_media is not working as
>> expected
>>
>>
>>
>> The log mentioned at https://pastebin.com/5JZmQUfq is by configuring
>> "debug = 4" in kamailio.cfg. Please suggest other way if any, to get more
>> debug logs.
>>
>>
>>
>> Thank you,
>>
>> Mitesh
>>
>>
>>
>> On Thu, Dec 19, 2019 at 3:34 PM Henning Westerholt <hw at skalatan.de>
>> wrote:
>>
>> Hello,
>>
>>
>>
>> I see – do you get any error message in the logs? Can you execute it with
>> debug logging activated, the function should output some debug logs about
>> its working.
>>
>>
>>
>> Cheers,
>>
>>
>>
>> Henning
>>
>>
>>
>> --
>>
>> Henning Westerholt – https://skalatan.de/blog/
>>
>> Kamailio services – https://gilawa.com
>>
>>
>>
>> *From:* Miteshkumar Thakkar <mitesh.thakkar at plivo.com>
>> *Sent:* Thursday, December 19, 2019 10:56 AM
>> *To:* Henning Westerholt <hw at skalatan.de>
>> *Cc:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
>> *Subject:* Re: [SR-Users] KSR.sdpops.remove_media is not working as
>> expected
>>
>>
>>
>> Thank you for your response Henning!
>>
>>
>>
>> Unfortunately, it is not removed from outgoing message.
>>
>> True. I also believe that msg_apply_changes is not recommended, hence I
>> am not using that.
>>
>>
>>
>> Thank you,
>>
>> Mitesh
>>
>>
>>
>>
>>
>> On Thu, Dec 19, 2019 at 3:14 PM Henning Westerholt <hw at skalatan.de>
>> wrote:
>>
>> Hello,
>>
>>
>>
>> does it actually remove the media after you send the message out? Usually
>> the message altering functions will only be applied when you send out the
>> message due to performance reasons.
>>
>>
>>
>> You can force it in the cfg with the function “msg_apply_changes” – then
>> you should be able to see it as well in the log. But using this function
>> has other side effects and is not recommended if you don’t need it.
>>
>>
>>
>> Cheers,
>>
>>
>>
>> Henning
>>
>>
>>
>> --
>>
>> Henning Westerholt – https://skalatan.de/blog/
>>
>> Kamailio services – https://gilawa.com
>>
>>
>>
>> *From:* sr-users <sr-users-bounces at lists.kamailio.org> *On Behalf Of *Miteshkumar
>> Thakkar
>> *Sent:* Tuesday, December 17, 2019 6:53 AM
>> *To:* sr-users at lists.kamailio.org
>> *Subject:* [SR-Users] KSR.sdpops.remove_media is not working as expected
>>
>>
>>
>> Hi,
>>
>>
>>
>> I wants to remove media type "image" from SDP. For that I have tried to
>> use KSR.sdpops.remove_media but it is not working. Not working in the sense
>> that there is no effect of that function on SDP. I am using lua. Kindly
>> find more details below.
>>
>>
>>
>> *Kamailio version*: kamailio 5.2.5 (x86_64/linux) 62d35f
>>
>>
>>
>> *SDP to process:*
>>
>> INVITE sip:xxxxxxxxxx at xxxxxxxxx.com:5060 SIP/2.0
>> Via: SIP/2.0/UDP xxx.xxx.xxx.xxx:5060;branch=z9hG4bK-60823-1-0
>> From: xxxxxxxxxx <sip: xxxxxxxxxx@ xxxxxxxxxx.com:5060>;tag=xxxxx
>> To: xxxxxxxxxx <sip: xxxxxxxxxx@ xxxxxxxxxx.com:5060>
>> Call-ID: 1-60823 at 172.16.19.64
>> CSeq: 1 INVITE
>> Contact: sip:xx at xxxxxxx:5060
>> Max-Forwards: 70
>> Content-Type: application/sdp
>> Content-Length:   337
>>
>> v=0
>> o=zt 53655765 2353687637 IN IP4 xxx.xxx.xxx.xxx
>> s=-
>> c=IN IP4 xxx.xxx.xxx.xxx
>> t=0 0
>> m=image xxxx RTP/AVP udptl t38
>> a=sendrecv
>> a=T38FaxVersion:0
>> a=T38MaxBitRate:14400
>> a=T38FaxRateManagement:transferredTCF
>> a=T38FaxMaxBuffer:262
>> a=T38FaxMaxDatagram:176
>> a=T38FaxUdpEC:t38UDPRedundancy
>> m=audio xxxx RTP/AVP 0
>> a=rtpmap:0 PCMU/8000
>>
>>
>>
>>
>>
>> *Code snippet:*
>>
>> KSR.sdpops.remove_media("image")
>> logger.log("info", "SDP:" .. headers.get("$sdp(body)"))
>>
>>
>>
>> *Log snippet:*
>>
>> https://pastebin.com/5JZmQUfq
>>
>>
>>
>> One more thing I would like to mention that if I do not use dialog module
>> then the function KSR.sdpops.remove_media works. But I can not avoid using
>> dialog module.
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Mitesh
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200106/8040f8c3/attachment.html>


More information about the sr-users mailing list