[SR-Users] Udp errors on High Availability Setup

[Duarte Rocha]

Greetings,

I have two Machines with Kamailio in a High Availability  (HA)
configuration. Both machines are active and processing calls and both have
one HA IP that can jump to the other machine in case of failure.

I also have probing for NAPs configured with each IP as the socket.

So, in each machine i have this configuration :

listen=udp:HA_Address1
listen=udp:HA_Address2

NAP 1 being probed from socket HA_Address1
NAP 1 being probed from socket HA_Address2

I also have /proc/sys/net/ipv4/ip_nonlocal_bind with value 1.

Everything works correctly with this configuration. However when the
probing is sent for the NAP' my logs get filled with the same error
messages.

udp_send(): sendto(sock, buf: 0x7f2d4c91fa18, len: 340, 0, dst:
(xxx.xxx.xxx.xxx:xxx), tolen: 16) - err: Invalid argument (22)
CRITICAL: <core> [core/udp_server.c:602]: udp_send(): invalid
sendtoparameters#012one possible reason is the server is bound to localhost
and#012attempts to send to the net
ERROR: tm [../../core/forward.h:219]: msg_send_buffer(): udp_send failed


The error happens because it is trying to probe a NAP using a socket that
isn't active at the moment in the machine.

Is there a way for this error not to be logged or be disabled without
reducing Log Level to suppress CRITICAL errors?
I think this is a standard High Availability configuration. Is there some
setting that can disable this kind of errors?

Best Regards,

Duarte Rocha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190508/f00b8b9e/attachment.html>