[SR-Users] sr-users Digest, Vol 170, Issue 1
ali mahfouz
arm037 at usal.edu.lb
Tue Jul 2 11:00:13 CEST 2019
chat over sip where and how save it
On Mon, Jul 1, 2019 at 1:03 PM <sr-users-request at lists.kamailio.org> wrote:
> Send sr-users mailing list submissions to
> sr-users at lists.kamailio.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> or, via email, send a message with subject or body 'help' to
> sr-users-request at lists.kamailio.org
>
> You can reach the person managing the list at
> sr-users-owner at lists.kamailio.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of sr-users digest..."
>
>
> Today's Topics:
>
> 1. Re: ATCF/ATGW functionality (Mojtaba)
> 2. Re: ATCF/ATGW functionality (Mojtaba)
> 3. Re: ATCF/ATGW functionality (Maryam Baghdadi)
> 4. kamailio wiht PJSIP IOS client (Gaurav Bmotra)
> 5. Re: ATCF/ATGW functionality (Mojtaba)
> 6. Re: Late offer ACKs not passing through branch_route
> (Enrico Bandiera)
> 7. kamailio 4.4.4 fills IPv6 contact address when sending packet
> over IPv4 (Pali Rohár)
> 8. Re: install mongoDB module with kamailio-cli doker image
> (Gaurav Bmotra)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 30 Jun 2019 15:40:07 +0430
> From: Mojtaba <mespio at gmail.com>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Cc: users at lists.kamailio.org
> Subject: Re: [SR-Users] ATCF/ATGW functionality
> Message-ID:
> <
> CABVi_Ew5Ti0bH5z4kcoBwx9jvv8S06GtEqgzCKPfxE7jfh7aJQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Unfortunately you can't, because SRVCC is a capable between MME and
> MCS in your network. When the UE is moving on, the MME send "Take
> handover of the call" to MSC and move the surrect session control to
> MSC. You could read more about SRVCC in 3GPP TS 29.280.
> And FHOSS does not support interface between MME and HSS,
> With Best Regards.Mojtaba
>
> On Sun, Jun 30, 2019 at 11:28 AM Maryam Baghdadi
> <maryam.baghdadi at gmail.com> wrote:
> >
> > Hello,
> >
> > Is it possible to add ATCF/ATGW functionality in kamailio as P-cscf ?
> > I have IMS network with kamailio as P-cscf, icscf, scscf and FHoss .
> > ATCF/ATGW is necessary for handovers between 2G/3G and LTE networks.
> >
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> --Mojtaba Esfandiari.S
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 30 Jun 2019 15:40:07 +0430
> From: Mojtaba <mespio at gmail.com>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Cc: users at lists.kamailio.org
> Subject: Re: [SR-Users] ATCF/ATGW functionality
> Message-ID:
> <
> CABVi_Ew5Ti0bH5z4kcoBwx9jvv8S06GtEqgzCKPfxE7jfh7aJQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Unfortunately you can't, because SRVCC is a capable between MME and
> MCS in your network. When the UE is moving on, the MME send "Take
> handover of the call" to MSC and move the surrect session control to
> MSC. You could read more about SRVCC in 3GPP TS 29.280.
> And FHOSS does not support interface between MME and HSS,
> With Best Regards.Mojtaba
>
> On Sun, Jun 30, 2019 at 11:28 AM Maryam Baghdadi
> <maryam.baghdadi at gmail.com> wrote:
> >
> > Hello,
> >
> > Is it possible to add ATCF/ATGW functionality in kamailio as P-cscf ?
> > I have IMS network with kamailio as P-cscf, icscf, scscf and FHoss .
> > ATCF/ATGW is necessary for handovers between 2G/3G and LTE networks.
> >
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> --Mojtaba Esfandiari.S
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 30 Jun 2019 16:32:01 +0430
> From: Maryam Baghdadi <maryam.baghdadi at gmail.com>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Subject: Re: [SR-Users] ATCF/ATGW functionality
> Message-ID:
> <CAPrdAbAnnTULTA1rZ-b=
> PG1FE+4HfqRHtKg_3R49WEBUXbM+Fw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thank you for your response,
> If we need to handover of call in our network, What's the solution? is it
> possible to add external MSC Server to out network? or add a SBC with this
> ability ?
>
> On Sun, Jun 30, 2019 at 3:40 PM Mojtaba <mespio at gmail.com> wrote:
>
> > Unfortunately you can't, because SRVCC is a capable between MME and
> > MCS in your network. When the UE is moving on, the MME send "Take
> > handover of the call" to MSC and move the surrect session control to
> > MSC. You could read more about SRVCC in 3GPP TS 29.280.
> > And FHOSS does not support interface between MME and HSS,
> > With Best Regards.Mojtaba
> >
> > On Sun, Jun 30, 2019 at 11:28 AM Maryam Baghdadi
> > <maryam.baghdadi at gmail.com> wrote:
> > >
> > > Hello,
> > >
> > > Is it possible to add ATCF/ATGW functionality in kamailio as P-cscf ?
> > > I have IMS network with kamailio as P-cscf, icscf, scscf and FHoss .
> > > ATCF/ATGW is necessary for handovers between 2G/3G and LTE networks.
> > >
> > > _______________________________________________
> > > Kamailio (SER) - Users Mailing List
> > > sr-users at lists.kamailio.org
> > > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >
> >
> >
> > --
> > --Mojtaba Esfandiari.S
> >
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.kamailio.org/pipermail/sr-users/attachments/20190630/b8ca6438/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Mon, 1 Jul 2019 11:16:33 +0530
> From: Gaurav Bmotra <saigauravmehra91 at gmail.com>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Subject: [SR-Users] kamailio wiht PJSIP IOS client
> Message-ID:
> <
> CAHeMQFqOa+hNdPYN1WfHJmiP2DMFhQ9neyvU7J5bEAxAZDe0YQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> hi
> i na using kamailio 5.1.2 and i m developing ios client with PJSIP
> audio is working fine ..but on video it work one side but not showing other
> side
> it is working fine on other client like zoiper for audio/video both
> can anyone help me
>
> --
>
>
>
>
>
>
>
>
> *Regards:*
> Gaurav Kumar
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.kamailio.org/pipermail/sr-users/attachments/20190701/3eedd894/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 5
> Date: Mon, 1 Jul 2019 10:33:36 +0430
> From: Mojtaba <mespio at gmail.com>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Subject: Re: [SR-Users] ATCF/ATGW functionality
> Message-ID:
> <CABVi_ExVopDjwk+aPH4SQR=Fog4LJaqbka_B8sb=
> QTubdMh3FQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> According to ETSI TS 129-280 V15, Your network must support Sv
> interface between MME to MSC. Your network infrastructure (EPC)
> should support this feature. So it is not intuitively related to PCSCF
> or SBC.
> Add external MSC server for what? Each 2g/3g network have it's MSC and
> it would be support Sv interface, too.
> With Best Regards.Mojtaba
>
> On Sun, Jun 30, 2019 at 4:32 PM Maryam Baghdadi
> <maryam.baghdadi at gmail.com> wrote:
> >
> > Thank you for your response,
> > If we need to handover of call in our network, What's the solution? is
> it possible to add external MSC Server to out network? or add a SBC with
> this ability ?
> >
> > On Sun, Jun 30, 2019 at 3:40 PM Mojtaba <mespio at gmail.com> wrote:
> >>
> >> Unfortunately you can't, because SRVCC is a capable between MME and
> >> MCS in your network. When the UE is moving on, the MME send "Take
> >> handover of the call" to MSC and move the surrect session control to
> >> MSC. You could read more about SRVCC in 3GPP TS 29.280.
> >> And FHOSS does not support interface between MME and HSS,
> >> With Best Regards.Mojtaba
> >>
> >> On Sun, Jun 30, 2019 at 11:28 AM Maryam Baghdadi
> >> <maryam.baghdadi at gmail.com> wrote:
> >> >
> >> > Hello,
> >> >
> >> > Is it possible to add ATCF/ATGW functionality in kamailio as P-cscf ?
> >> > I have IMS network with kamailio as P-cscf, icscf, scscf and FHoss .
> >> > ATCF/ATGW is necessary for handovers between 2G/3G and LTE networks.
> >> >
> >> > _______________________________________________
> >> > Kamailio (SER) - Users Mailing List
> >> > sr-users at lists.kamailio.org
> >> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >>
> >>
> >>
> >> --
> >> --Mojtaba Esfandiari.S
> >>
> >> _______________________________________________
> >> Kamailio (SER) - Users Mailing List
> >> sr-users at lists.kamailio.org
> >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> --
> --Mojtaba Esfandiari.S
>
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 1 Jul 2019 08:37:08 +0200
> From: Enrico Bandiera <enrico.bandiera at cloud.timenet.it>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Subject: Re: [SR-Users] Late offer ACKs not passing through
> branch_route
> Message-ID:
> <
> CAGqwm+cOye+uXwC_Gdt0-fNEkcJ8UKYfmj+46UFvE9esRft4-A at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Daniel, thank you.
> I will add a special case for ACKs in the request route.
>
> Cheers,
> Enrico.
>
> Il giorno mar 25 giu 2019 alle ore 16:46 Daniel-Constantin Mierla <
> daniel at kamailio.org> ha scritto:
>
> > Hello,
> >
> > the ACK doesn't get through the branch_route block because it is
> forwarded
> > in stateless mode. The ACK doesn't have a reply, therefore is not
> > transaction state to be kept for it. You have to apply all the rules you
> > want for the ACK inside the request_route logic. If there is a
> > retransmission of the ACK, again it is not detected, so it will just run
> > again through the same rules in request_route. This is of course for the
> > ACK following the 200ok.
> >
> > Cheers,
> > Daniel
> >
> > June 25, 2019 1:42 PM, "Bandiera, Enrico" <
> > enrico.bandiera at cloud.timenet.it
> > <%22Bandiera,%20Enrico%22%20%3Cenrico.bandiera at cloud.timenet.it%3E>>
> > wrote:
> >
> > Hi, I'm encountering an issue when relaying late offer ACKs, before
> > relaying I set the branch_route with t_on_branch() but kamailio never
> > enters that route after calling t_relay
> > I'm keeping the rtpengine module calls inside branch_routes to avoid
> > issues when re-routing in failure routes
> > I suppose it's something related to ACK packets but I'm not sure what the
> > issue is.
> > Any hints?
> > Thanks,
> > Enrico.
> >
> >
> >
> > --
> > Daniel-Constantin Mierla
> > www.kamailio.org -- www.asipto.com
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.kamailio.org/pipermail/sr-users/attachments/20190701/14e2d94a/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 7
> Date: Sun, 30 Jun 2019 23:11:22 +0200
> From: Pali Rohár <pali.rohar at gmail.com>
> To: sr-users at lists.kamailio.org
> Subject: [SR-Users] kamailio 4.4.4 fills IPv6 contact address when
> sending packet over IPv4
> Message-ID: <20190630211122.zrsh47rjpdilikpx at pali>
> Content-Type: text/plain; charset=utf-8
>
> Hi!
>
> I detected strange problem that sip.linphone.org refuse to accept
> presence information re-transmitted by kamailio 4.4.4 server.
>
> I debug this problem with tcpdump and I found out that problem is in
> kamailio which fills IPv6 address into UDP datagram and that datagram is
> sent via IPv4 socket to IPv4 address, to sip.linphone.org server. And
> sip.linphone.org server does not have IPv6 connectivity, so correctly
> return over IPv4 to sender just "400 Bad Contact Header" error.
>
> On my server is running kamailio 4.4.4 from Debian Stretch and I can
> 100% reproduce this problem against public sip.linphone.org server.
>
> My server has both IPv4 and IPv6 connectivity and kamailio is listening
> for both IPv4 and IPv6 connections.
>
> So why is kamailio sending IPv6 address over IPv4 and therefore makes it
> impossible to communicate with non-IPv6 enabled servers? Looks like a
> problem with choosing default/correct socket for Contact header.
>
> And how to fix this problem? Can you help me? I would like to have
> working interconnection with linphone servers.
>
> Just to note I'm seeing this problem only for presence information
> packets. Other requests, like INVITE or MESSAGE seems to work.
>
> Below is relevant tcpdump output. Some parts were replaced by {VAR}.
>
> PS: I'm not subscribed to list, so please CC my address when sending
> reply. Thank you!
>
>
> 17:22:58.121719 IP (tos 0x10, ttl 64, id 21629, offset 0, flags [none],
> proto UDP (17), length 1266)
> {MY_IPV4_ADDRESS}.5060 > 91.121.209.194.5060: [bad udp cksum 0xa099 ->
> 0x9825!] SIP, length: 1238
> NOTIFY sip:{REMOTE_NAME}@{REMOTE_USER_IPV4_ADDRESS}:5060;registering_acc=sip_linphone_org
> SIP/2.0
> Via: SIP/2.0/UDP
> {MY_IPV4_ADDRESS};branch=z9hG4bK2b55.88f93c20000000000000000000000000.0
> To: <sip:{REMOTE_NAME}@sip.linphone.org>;tag=75559182
> From: <sip:{MY_SIP_URI}>;tag=97d8e785fdf42bf9622a64c13c504961-2708
> CSeq: 2 NOTIFY
> Call-ID: 26cf9d5c019af2dc3302b770887bcc2e at 0:0:0:0:0:0:0:0
> Route: <sip:91.121.209.194:5060;lr>
> Content-Length: 597
> User-Agent: kamailio (4.4.4 (x86_64/linux))
> Max-Forwards: 70
> Event: presence
> Contact: <sip:{MY_IPV6_ADDRESS}:5060;transport=udp>
> Subscription-State: active;expires=3600
> Content-Type: application/pidf+xml
>
> <?xml version="1.0" encoding="UTF-8"?>
> <presence xmlns="urn:ietf:params:xml:ns:pidf"
> xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model"
> xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid" entity="Pali
> <sip:{MY_SIP_URI}>">
> <tuple id="sg89ae">
> <status><basic>open</basic></status>
> <contact priority="0.8">Pali <sip:{MY_SIP_URI}></contact>
> </tuple>
>
> <tuple xmlns="urn:ietf:params:xml:ns:pidf" id="TA0C538B2">
> <status>
> <basic>closed</basic>
> </status>
> <contact priority="1">sip:{MY_SIP_URI}</contact>
> <timestamp>2019-04-19T17:20:36+02:00</timestamp>
> </tuple>
> </presence>
>
> 17:22:58.151188 IP (tos 0x0, ttl 52, id 22949, offset 0, flags [none],
> proto UDP (17), length 373)
> 91.121.209.194.5060 > {MY_IPV4_ADDRESS}.5060: [udp sum ok] SIP,
> length: 345
> SIP/2.0 400 Bad Contact Header
> Via: SIP/2.0/UDP
> {MY_IPV4_ADDRESS};branch=z9hG4bK2b55.88f93c20000000000000000000000000.0;rport=5060
> From: <sip:{MY_SIP_URI}>;tag=97d8e785fdf42bf9622a64c13c504961-2708
> To: <sip:{REMOTE_NAME}@sip.linphone.org>;tag=75559182
> Call-ID: 26cf9d5c019af2dc3302b770887bcc2e at 0:0:0:0:0:0:0:0
> CSeq: 2 NOTIFY
> Content-Length: 0
>
>
> --
> Pali Rohár
> pali.rohar at gmail.com
>
>
>
> ------------------------------
>
> Message: 8
> Date: Mon, 1 Jul 2019 14:07:25 +0530
> From: Gaurav Bmotra <saigauravmehra91 at gmail.com>
> To: "Kamailio (SER) - Users Mailing List"
> <sr-users at lists.kamailio.org>
> Subject: Re: [SR-Users] install mongoDB module with kamailio-cli doker
> image
> Message-ID:
> <CAHeMQFqGPemmbqTrDqUjFVrxHPeAi5V8=nGw26U=
> pTJaha3ONQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> hi did you update kamailio-cli image for mongoDB
>
> thank you
>
> On Fri, Jun 28, 2019 at 7:09 PM Gaurav Bmotra <saigauravmehra91 at gmail.com>
> wrote:
>
> > thanks for reply
> > i have create feature
> > https://github.com/kamailio/kamailio/issues/1995
> >
> > On Fri, Jun 28, 2019 at 6:31 PM Sergey Safarov <s.safarov at gmail.com>
> > wrote:
> >
> >> Could you open feature request here
> >> <https://github.com/kamailio/kamailio/issues> and I try update image
> >>
> >> On Fri, Jun 28, 2019 at 3:40 PM Gaurav Bmotra <
> saigauravmehra91 at gmail.com>
> >> wrote:
> >>
> >>> hi
> >>> i wan to install mongodb module in kamailio/kamailio-ci image
> >>>
> >>> pl help me
> >>> thnaks
> >>> --
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> *Regards:*
> >>> Gaurav Kumar
> >>>
> >>> _______________________________________________
> >>> Kamailio (SER) - Users Mailing List
> >>> sr-users at lists.kamailio.org
> >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >>>
> >> _______________________________________________
> >> Kamailio (SER) - Users Mailing List
> >> sr-users at lists.kamailio.org
> >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >>
> >
> >
> > --
> >
> >
> >
> >
> >
> >
> >
> >
> > *Regards:*
> > Gaurav Kumar
> >
> >
>
> --
>
>
>
>
>
>
>
>
> *Regards:*
> Gaurav Kumar
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.kamailio.org/pipermail/sr-users/attachments/20190701/3963a0a8/attachment-0001.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> sr-users mailing list
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> ------------------------------
>
> End of sr-users Digest, Vol 170, Issue 1
> ****************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190702/0a9fba82/attachment.html>
More information about the sr-users
mailing list