[SR-Users] Radius Accounting with Kamailio 5.1 (On-line Charging)

[YASIN CANER]

Hello,

After setting servers conf file , you should see radius requests on tcpdump because of UDP. In addition ,have a look log files if there is a hint.

FreeRadius conf files.

https://github.com/FreeRADIUS/freeradius-client/tree/master/etc



Yasin CANER
[https://avatars1.githubusercontent.com/u/2430370?s=400&v=4]<https://github.com/FreeRADIUS/freeradius-client/tree/master/etc>

freeradius-client/etc at master · FreeRADIUS/freeradius-client · GitHub<https://github.com/FreeRADIUS/freeradius-client/tree/master/etc>
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
github.com



________________________________
From: sr-users <sr-users-bounces at lists.kamailio.org> on behalf of Yazar Lwin <yarzarlwin at gmail.com>
Sent: Monday, January 21, 2019 6:21 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Radius Accounting with Kamailio 5.1 (On-line Charging)

Hello,

I enabled acc_radius module and acc module as well.  I also followed the acc_radius module config as below. CDR are populated in Siremis. But can't initiated radius accounting.

# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
 * if you enable this parameter, be sure the enable "append_fromtag"
 * in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
        "src_user=$fU;src_domain=$fd;src_ip=$si;"
        "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
#--------acc_radius acc params------
modparam("acc_radius", "radius_config", "/etc/radiusclient/radiusclient.conf")
modparam("acc_radius", "radius_flag", 1)
modparam("acc_radius", "radius_missed_flag", 2)
modparam("acc_radius", "service_type", 15)
modparam("acc_radius", "radius_extra", "via=$hdr(Via[*]); email=$avp(s:email)")
modparam("acc_radius", "rad_time_mode", 1)


On Sat, Jan 19, 2019 at 7:52 PM YASIN CANER <caner_yaso at hotmail.com<mailto:caner_yaso at hotmail.com>> wrote:
Hello

Radius accounting working with acc module.  When you set acc flag , it try to send radius request to configured server. Dont forget the  configure radiusclient configuration. Ypu can find it on internet. Here is a document , it is old but helps

https://www.kamailio.org/docs/openser-radius-1.0.x.html

Good luck

Yasin CANER

iPhone’umdan gönderildi

Yazar Lwin <yarzarlwin at gmail.com<mailto:yarzarlwin at gmail.com>> şunları yazdı (19 Oca 2019 14:36):

Hi All,

I've Kamailio 5.1 running with Mysql as local DB.
I've configured Siremis as well. I completed accounting configuration as per the instruction. Now I can see the accounting list, CDR list and as well as missed calls in Siremis But I can't integrate with free radius server to trigger the accounting, just like Diameter transaction in IMS. Kindly advise which doc I should check.
I would like to enable Radius server as an online charging.

Best regards
Yazar
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190121/0c3a9e33/attachment.html>