[SR-Users] Kamailio and CDR

[Yu Boot]

Thanks you!

10.04.2019 10:28, Jan-Hendrik Dörner пишет:
> Hello,
>
> i was working on a similar problem. I followed the acc-dialog -> 
> (r)syslog approach.
> In rsyslog I piped the message to a script, which appends the message 
> as a xml-record to a file in "/var/log/kamailio-call.log“.
> (This script might be useful for you to adapt to your needs.)
>
> module(load="omprog“)
> local6.* action(type="omprog" binary="/etc/rsyslog-cdr-script.sh")
>
> and my script looks like
>
> #! /bin/ash
> Log=/var/log/kamailio-call.log
> read fromstdin;
> while read fromstdin; do
>  echo $fromstdin | sed -e "s/^[^;]* \(.*=\)/\1/" -e 
> "s/\(time=[0-9]*\)\.[0-9]*/\1/g" -e "s/\([^=;]*\)=\([^;]*\(;[^ 
> ][^=]*=[^;]*\)*\); / <\1>\2<\/\1>; /g" -e "s/ \([^=;]*\)=\([^;]*\(;[^ 
> ][^=]*=[^;]*\)*\)$/ <\1>\2<\/\1>/" | awk 'BEGIN {FS=";"; printf 
> "<call>"} { i = 1; while(i < NF){if(index($i,"time>")>0) { time_value 
> = $i; gsub("<[^>]*>","",time_value); sub(">[^<]*", 
> strftime(">%Y-%m-%dT%H:%M:%S", time_value), $i); } printf $i;  i = 
> i+1;} } END {print "</call>"}' >> $Log
> done
>
> Here a little explanation that might be helpful to understand the 
> commands:
> The sed-command
> *) removes the front syslog-stuff
> *) trunks all the post dot digit from any entry that names ends with 
> „time" and
> *) converts it to xml-syntax (one extra for the last entry)
>
> The awk command converts the (trunked) timestamps into a 
> "human-readable“ format and adds the enclosing „call“ syntax.
> (If you exactly know what your syslog entry syntax is, you might 
> simplify the script statements a lot … )
>
> I hope this helps a little.
>
> Regards
> Jan-Hendrik
>
>
>> Am 07.04.2019 um 12:42 schrieb Henning Westerholt <hw at skalatan.de 
>> <mailto:hw at skalatan.de>>:
>>
>> Hello,
>>
>> some starting points:
>>
>> - use dlg_manage() or set a dialog flag in the cfg to start dialog 
>> tracking
>>
>> - setup the dialog event routes (section 11 in README) and put your
>> logging logic there
>>
>> Best regards,
>>
>> Henning
>>
>> Am 06.04.19 um 11:29 schrieb Yu Boot:
>>> How to make something on dialog event? Just can't figure it out after
>>> reading module docs :(
>>>
>>>
>>> 06.04.2019 2:09, David Villasmil пишет:
>>>> You can always export the cdr table periodically.
>>>> Take a look at siremis. And when the trigger fires every 5 minutes to
>>>> create the cdrs, just export them.
>>>>
>>>>
>>>> Also, as it’s been said, you can use the dialog and when the call
>>>> ends gather all the info and just print it out. You can direct it to
>>>> rsyslog to save it anywhere you want.
>>>>
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users at lists.kamailio.org <mailto:sr-users at lists.kamailio.org>
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> -- 
>> Henning Westerholt - https://skalatan.de/blog/
>> Kamailio services - https://skalatan.de/services
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org <mailto:sr-users at lists.kamailio.org>
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190410/b828ece6/attachment.html>