[SR-Users] Problem with replicating dialogs using DMQ

[Jan Hazenberg]

In the output of "kamcmd dmq.list_nodes" i see nodes twice. One with ip
address of the host and one with the hostname of the host.

Jan

On Thu, Sep 27, 2018 at 12:47 PM Jan Hazenberg <jenus321 at gmail.com> wrote:

> Daniel,
>
> It indeed sends duplicate DMQ messages, one to the ip of the other node
> and one to the hostname of the other node.
>
> Unknown request: KDMQ sip:dialog at sip04.voip.domain.acc:5060 |
> (application/json)
> Unknown request: KDMQ sip:dialog at 10.10.10.12:5060 |  (application/json)
>
> Is there any way to disable this?
>
> Thanks,
>
> Jan
>
>
> On Thu, Sep 27, 2018 at 11:50 AM Daniel-Constantin Mierla <
> miconda at gmail.com> wrote:
>
>> Hello,
>>
>> the log message says that the dialog was already added to the timer. Do
>> you see retransmissions of the DMQ requests on the network with
>> ngrep/wireshark/...?
>> Cheers,
>> Daniel
>>
>> On 27.09.18 10:40, Jan Hazenberg wrote:
>>
>> Hello,
>>
>> I'm trying to replicate active dialogs using the DMQ module. I see the
>> dialogs on the other nodes but it generates a error message in the logs on
>> all the nodes:
>>
>> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
>> [dlg_timer.c:130]: insert_dlg_timer(): Trying to insert a bogus dlg
>> tl=0x7efdca1bebf8 tl->next=0x7efdca14cb80 tl->prev=0x7efdca14cb80
>> Sep 27 10:17:31 sip04 /usr/sbin/kamailio[27367]: CRITICAL: dialog
>> [dlg_dmq.c:309]: dlg_dmq_handle_msg(): Unable to insert dlg timer
>> 0x7efdca1beb98 [2643:3725]
>>
>> Even with the timeout_avp option disabled i still see the error messages.
>> I tested this on kamailio 5.0.3 and 5.1.3 with the same results.
>>
>> With debug enabled i see the correct data is replicated to the other
>> nodes:
>>
>> dlg_dmq_replicate_action(): sending serialized data
>> {"action":2,"h_entry":1328,"h_id":409,"state":4,"start_ts":1538036606,"lifetime":7200,"tag1":"1635359980","tag2":"as2d80799c","cseq1":"21","cseq2":"0","route_set1":"","route_set2":"","contact1":
>> "sip:sipuser at 10.10.10.10:1057;alias=10.10.10.10~1055~1","contact2":"
>> sip:+31101234567 at 10.10.10.10:5060"}
>>
>> "lifetime":7200 is in the serialized data, and when i check on the other
>> node with "kamcmd dlg.list" i see that the lifetime data is not updated.
>>
>>
>> Thanks,
>>
>> Jan
>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing Listsr-users at lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> --
>> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
>> Kamailio World Conference -- www.kamailioworld.com
>> Kamailio Advanced Training, Nov 12-14, 2018, in Berlin -- www.asipto.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20180927/fe1ae606/attachment.html>