[SR-Users] handle_ruri_alias() question or issue?

[Igor Olhovskiy]

What is in $du if you log it right after handle_ruri_alias()?
Maybe you overwrite it somewhere later?

Regards, Igor
On Sep 1, 2018, 7:34 PM +0200, Wilkins, Steve <swwilkins at mitre.org>, wrote:
> Thank you Joel,
>
> My issue is that, given the Incoming Request: [[BYE sip:2406506175 at 20.20.20.20:5060;alias=10.10.10.5~55157~2 SIP/2.0.  I want to route the BYE to the alias 10.10.10.5:55157.  I have tried the combination you spoke of and it always still get routed to 20.20.20.20.5060.
>
> I have even tried storing the original Via from the INVITE and using that in the BYE, however, I get a variable to maintain it’s state.
>
> Thanks again,
> -Steve
>
> From: sr-users <sr-users-bounces at lists.kamailio.org> On Behalf Of Joel Serrano
> Sent: Saturday, September 1, 2018 10:43 AM
> To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
> Subject: Re: [SR-Users] handle_ruri_alias() question or issue?
>
> I think you are mixing 2 different approaches of achieving the same:
>
> 1- Use: fix_nated_contact() --> Will *modify* the contact header and *replace* current ip:port with correct ip:port.
>
> 2- Use: set_contact_alias() in conjunction with handle_ruri_alias() --> set_contact_alias will *add an alias* with correct ip:port but will not *modify* the current ip:port sent by the UAC.  handle_ruri_alias will search for an alias in the RURI and if found, it will remove it and *set $du accordingly*.You will not see the contact with correct ip:port in RURI but routing will be sent to correct ip:port ($du).
>
> This is a high level explanation, but I hope it helps you understand what is going on. If you print $du in the logs after calling handle_ruri_alias() you should see what you expect (if you previously called set_contact_alias)... Or you can call set_contact_alias on not call handle_ruri_alias. Two ways of doing the same.
>
> On Sat, Sep 1, 2018 at 04:47 Wilkins, Steve <swwilkins at mitre.org> wrote:
> > Good Morning All,
> >
> > The following Incoming request came in =>
> > SIP Incoming Request: [[BYE sip:2406506175 at 20.20.20.20:5060;alias=10.10.10.5~55157~2 SIP/2.0
> >
> > I called handle_ruri_alias(), and expected the destination and port to be set to 10.10.10.5:55157, but it was not.
> > It was left 20.20.20.20:5060.
> >
> > Is my thinking correct or is there another way to set the destination and port to the alias?
> >
> > Thanks All!,
> > -Steve
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20180901/c8e613a2/attachment.html>