[SR-Users] Transport issue thought

[Federico Cabiddu]

I don't understand, are you able to send an INVITE to Asterisk via TCP?
Could you share a trace of the calls, masking the sensible information?

Cheers,

Federico

On Fri, May 18, 2018 at 4:56 PM, Wilkins, Steve <swwilkins at mitre.org> wrote:

> I have tried using t_relay_to_tcp() and t_realy, both with and without
> setting $ru = $ru + ";transport=tcp" right before the call.
>
> I get different errors and failures depending on which way I make the
> call.  Which log would you want to see?
>
>
>
>    - I also wanted to point out that if I use UDP, the call connects (it
>    is a WebRTC client to WebRTC client call, and both clients are registered
>    in Kamailio).  The call just gets dropped after 30 seconds because Asterisk
>    15.3 is not receiving the ACK back to the ‘200 OK’.  Aas stated, TCP does
>    not even connect.
>
>
>
>    - Another very interesting thing is that if I use UDP and Asterisk
>    14.6, the call works perfect! It stays connected and I have full duplex
>    Audio and Video
>
>
>
> Thank you!
>
>
>
>
>
> *From:* sr-users [mailto:sr-users-bounces at lists.kamailio.org] *On Behalf
> Of *Federico Cabiddu
> *Sent:* Friday, May 18, 2018 8:49 AM
>
> *To:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
> *Subject:* Re: [SR-Users] Transport issue thought
>
>
>
> Can you print the logs when it tries to send the ACK?
>
> Check also that the ACK ruri contains the same destination port which was
> used for the INVITE, otherwise a new connection will be created.
>
>
>
> Best regards,
>
>
>
> Federico
>
>
>
> On Fri, May 18, 2018 at 2:31 PM, Wilkins, Steve <swwilkins at mitre.org>
> wrote:
>
> Thank you Alex and Federico,
>
>
>
> I verified, and SO_REUSEPORT is defined on my OS.  I am using Kamailio 5.2
> and I set ‘tcp_reuse_port=yes;’ and $fs;  this has been to no avail as
> ‘ACK’s’ are still using the high port number randomly assigned by Kamailio.
>
>
>
> Thank you all for sharing your knowledge!
>
>
>
>
>
> *From:* sr-users [mailto:sr-users-bounces at lists.kamailio.org] *On Behalf
> Of *Federico Cabiddu
> *Sent:* Friday, May 18, 2018 12:57 AM
> *To:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
> *Subject:* Re: [SR-Users] Transport issue thought
>
>
>
> You are right Alex, Linux kernel didn't support SO_REUSEPORT, which allows
> a socket to be used as source for a tcp connection while is already bound,
> until version 3.9.
>
> Kamailio's parameter tcp_reuse_port, if enabled and your OS has support
> for SO_REUSEPORT (so not only Linux but FreeBSD, OSX and others), allows
> you to use force_send_socket (or $fs) to send messages from a TCP port
> kamailio is listening to.
>
>
>
> Cheers,
>
>
>
> Federico
>
>
>
> On Fri, May 18, 2018 at 12:28 AM, Alex Balashov <abalashov at evaristesys.com>
> wrote:
>
> When an outgoing TCP connection is opened, either a port can be
> explicitly bound, or it is auto-assigned by the OS's networking stack. I
> believe Kamailio does the latter and does not offer options to constrain
> the range. If it does, I'm not aware of any apart from this one:
>
> https://www.kamailio.org/wiki/cookbooks/5.1.x/core#tcp_reuse_port
>
> Not sure if it would help in this case, you'd have to give it a try.
>
>
> On Thu, May 17, 2018 at 10:21:34PM +0000, Wilkins, Steve wrote:
>
> > It appears that the bottom line of my TCP transport not working is that
> Kamailio is randomly assigning large port numbers to send the TCP traffic
> out on.
> > I am not able to randomly open high ports for this purpose.  Is there a
> way to tell Kamailio to only use specific ports for this.  I have tried
> using
> > force_send_socket() with Kamailio' s IP, and the port I want to send out
> on, but this did not work either.  Does this sound like I am on the right
> track?
> >
> > Thank you,
> > -
>
> > _______________________________________________
> > Kamailio (SER) - Users Mailing List
> > sr-users at lists.kamailio.org
> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Alex Balashov | Principal | Evariste Systems LLC
>
> Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
> Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20180518/13c2f6cf/attachment.html>