[SR-Users] Carrier IP on softphone call history !!!

[Alex Balashov]

That said, there are plenty of people who will tell you that topoh and topos work fine for most unextraordinary use-cases. You may want to give that a shot first for simplicity's sake. But if you run into eccentric problems, don't crawl down the rabbit hole. :-) 

On May 4, 2018 1:32:27 PM EDT, KamDev Essa <kamdevessa at yahoo.com> wrote:
> I am very familiar with Freeswitch and adding that in the design. 
>Thanks for the suggestion. Will update here.
>thanks again.
>KD
>On Friday, May 4, 2018, 1:22:10 PM EDT, Alex Balashov
><abalashov at evaristesys.com> wrote:  
> 
> On Fri, May 04, 2018 at 05:16:39PM +0000, KamDev Essa wrote:
>
>>  Whats the config or architecture look like for shunting calls
>through
>>  a signalling-only B2BUA. Can you please elaborate.
>
>For starters, you need to pick a signalling-only B2BUA. This can be
>Asterisk or Freeswitch configured for media bypass, or SEMS or
>something
>else.
>
>The architecture would be something like:
>
>  Carrier --> B2BUA --> Kamailio --> End-user.
>
>At least, it seems to me that's easiest.
>
>For outbound calls:
>
>  $ru = 'sip:destination at host';
>  $du = 'sip:b2bua.addr';
>
>  if(!t_relay())
>      t_relay();
>
>That's one approach. Depends on the B2BUA. It may be easiest to pass
>the
>onward RURI to it in a custom SIP header:
>
>  append_hf("X-RURI: sip:destination at host\r\n");
>  $ru = 'sip:b2bua.addr';
>
>  if(!t_relay())
>      sl_reply_error();
>
>Of course, the way the B2BUA works will dictate what you do with
>inbound
>on it as well. The intent would be to pass it onto Kamailio on the B
>leg.
>
>-- Alex


-- Alex

--
Sent via mobile, please forgive typos and brevity.