[SR-Users] kamailio it does not start after reboot

Fri Mar 30 15:51:28 CEST 2018

It was a broken installation. Reinstalled and now it works fine.
Thanks a lot for your time.

On Wed, Mar 28, 2018 at 4:38 PM, Tomi Hakkarainen <tpaivaa at gmail.com> wrote:

> Yo Atux,
>
> You have some configuration error on line 150 on your kamailio
> configuration file /etc/kamailio/kamailio.cfg
> Check and correct that next ...
>
> Tomi
>
>
> On 28 Mar 2018, at 16.30, Atux Atux <atuxnull at gmail.com> wrote:
>
> here are the outputs of the commands i issued:
>
>
> root at debian:~# systemctl status kamailio.service >error.txt
> ● kamailio.service - Kamailio Server
>    Loaded: loaded (/etc/systemd/system/kamailio.service; enabled)
>    Active: failed (Result: exit-code) since Wed 2018-03-28 16:07:22 EEST;
> 17min ago
>   Process: 410 ExecStart=/usr/sbin/kamctl start (code=exited,
> status=1/FAILURE)
>
> Mar 28 16:07:18 debian kamctl[410]: ** INFO: Starting Kamailio :
>
> *Mar 28 16:07:18 debian kamailio[460]: CRITICAL: <core> [core/cfg.y:3450]:
> yyerror_at(): parse error in config file /etc/kamailio//kamailio.cfg, line
> 150, column 7: syntax error*
> Mar 28 16:07:18 debian kamailio[460]: CRITICAL: <core> [core/cfg.y:3450]:
> yyerror_at(): parse error in config file /etc/kamaili
> o//kamailio.cfg, line 150, column 7:
> Mar 28 16:07:18 debian kamailio[460]: INFO: <core> [core/sctp_core.c:53]:
> sctp_core_destroy(): SCTP API not initialized
> Mar 28 16:07:22 debian kamctl[410]: ** ERROR: PID file
> /var/run/kamailio.pid does not exist -- Kamailio start failed
> Mar 28 16:07:22 debian systemd[1]: kamailio.service: control process
> exited, code=exited status=1
> Mar 28 16:07:22 debian systemd[1]: Failed to start Kamailio Server.
> Mar 28 16:07:22 debian systemd[1]: Unit kamailio.service entered failed
> state.
> root at debian:~#
> ------------------------------------------------------------
> --------------------------------------
> root at debian:~# journalctl -xn >> error.txt
>
> ● kamailio.service - Kamailio Server
>    Loaded: loaded (/etc/systemd/system/kamailio.service; enabled)
>    Active: failed (Result: exit-code) since Wed 2018-03-28 16:07:22 EEST;
> 17min ago
>   Process: 410 ExecStart=/usr/sbin/kamctl start (code=exited,
> status=1/FAILURE)
>
> Mar 28 16:07:18 debian kamctl[410]: ** INFO: Starting Kamailio :
> Mar 28 16:07:18 debian kamailio[460]: CRITICAL: <core> [core/cfg.y:3450]:
> yyerror_at(): parse error in config file /etc/kamailio//kamailio.cfg, line
> 150, column 7: syntax error
> Mar 28 16:07:18 debian kamailio[460]: CRITICAL: <core> [core/cfg.y:3450]:
> yyerror_at(): parse error in config file /etc/kamailio//kamailio.cfg, line
> 150, column 7:
> Mar 28 16:07:18 debian kamailio[460]: INFO: <core> [core/sctp_core.c:53]:
> sctp_core_destroy(): SCTP API not initialized
> Mar 28 16:07:22 debian kamctl[410]: ** ERROR: PID file
> /var/run/kamailio.pid does not exist -- Kamailio start failed
> Mar 28 16:07:22 debian systemd[1]: kamailio.service: control process
> exited, code=exited status=1
> Mar 28 16:07:22 debian systemd[1]: Failed to start Kamailio Server.
> Mar 28 16:07:22 debian systemd[1]: Unit kamailio.service entered failed
> state.
> -- Logs begin at Wed 2018-03-28 16:07:17 EEST, end at Wed 2018-03-28
> 16:24:19 EEST. --
> Mar 28 16:07:22 debian systemd[1]: Starting Update UTMP about System
> Runlevel Changes...
> -- Subject: Unit systemd-update-utmp-runlevel.service has begun with
> start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit systemd-update-utmp-runlevel.service has begun starting up.
> Mar 28 16:07:22 debian systemd[1]: Started Update UTMP about System
> Runlevel Changes.
> -- Subject: Unit systemd-update-utmp-runlevel.service has finished
> start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit systemd-update-utmp-runlevel.service has finished starting up.
> --
> -- The start-up result is done.
> Mar 28 16:07:22 debian systemd[1]: Startup finished in 1.928s (kernel) +
> 5.439s (userspace) = 7.367s.
> -- Subject: System start-up is now complete
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- All system services necessary queued for starting at boot have been
> -- successfully started. Note that this does not mean that the machine is
> -- now idle as services might still be busy with completing start-up.
> --
> -- Kernel start-up required 1928374 microseconds.
> --
> -- Initial RAM disk start-up required INITRD_USEC microseconds.
> --
> -- Userspace start-up required 5439009 microseconds.
> Mar 28 16:17:01 debian CRON[1233]: pam_unix(cron:session): session opened
> for user root by (uid=0)
> Mar 28 16:17:01 debian CRON[1234]: (root) CMD (   cd / && run-parts
> --report /etc/cron.hourly)
> Mar 28 16:17:01 debian CRON[1233]: pam_unix(cron:session): session closed
> for user root
> Mar 28 16:22:39 debian systemd[1]: Starting Cleanup of Temporary
> Directories...
> -- Subject: Unit systemd-tmpfiles-clean.service has begun with start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit systemd-tmpfiles-clean.service has begun starting up.
> Mar 28 16:22:39 debian systemd[1]: Started Cleanup of Temporary
> Directories.
> -- Subject: Unit systemd-tmpfiles-clean.service has finished start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit systemd-tmpfiles-clean.service has finished starting up.
> --
> -- The start-up result is done.
> Mar 28 16:24:19 debian sshd[1240]: Accepted password for root from
> 192.168.1.143 port 9306 ssh2
> Mar 28 16:24:19 debian sshd[1240]: pam_unix(sshd:session): session opened
> for user root by (uid=0)
>
>
>
> --------------------------------------------------
>
> root at debian:/etc/systemd/system# more kamailio.service
> [Unit]
> Description=Kamailio Server
> After=syslog.target network.target
>
> [Service]
> Type=forking
> EnvironmentFile=-/etc/default/kamailio
> PIDFile=\$PIDFILE
> Restart=on-abort
> ExecStart=/usr/sbin/kamctl start
> ExecRestart=/usr/sbin/kamctl restart
> ExecStop=/usr/sbin/kamctl stop
>
>
>
> [Install]
> WantedBy=multi-user.target
>
>
> ------------------------------------------
> root at debian:~# systemctl enable kamailio.service
> Synchronizing state for kamailio.service with sysvinit using update-rc.d...
> Executing /usr/sbin/update-rc.d kamailio defaults
> Executing /usr/sbin/update-rc.d kamailio enable
> Failed to execute operation: File exists
> root at debian:~#
>
>
>
>
>
>
>
> On Wed, Mar 28, 2018 at 4:03 PM, Aqs Younas <aqsyounas at gmail.com> wrote:
>
>> Try to run  'journalctl -xn'. Most probably you will see the error
>> there. Make sure you have kamailio.service enable to run on reboot.
>> 'systemctl enable kamailio.service'
>>
>> Br, Aqs.
>>
>> On 28 March 2018 at 17:51, Atux Atux <atuxnull at gmail.com> wrote:
>>
>>> i am installing Kamailio using apt in a debian 8 machine by following
>>> this guide
>>> http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hour
>>> i managed to create a few users and through Jitsi to talk to each other.
>>> once i reboot the machine, then the problems start and Kamailio cannot
>>> start.
>>> here are a few details from my system.
>>> -/etc/apt/sources.list the part for Kamailio
>>> #Kamailio
>>> deb     http://deb.kamailio.org/kamailio51 jessie  main
>>> deb-src http://deb.kamailio.org/kamailio51 jessie  main
>>>
>>>
>>> -Version info
>>> Distributor ID:    Debian
>>> Description:    Debian GNU/Linux 8.10 (jessie)
>>> Release:    8.10
>>> Codename:    jessie
>>>
>>> -root at debian:~# systemctl start kamailio
>>> Job for kamailio.service failed. See 'systemctl status kamailio.service'
>>> and 'journalctl -xn' for details.
>>>
>>> root at debian:~# /etc/init.d/kamailio start
>>> [....] Starting kamailio (via systemctl): kamailio.serviceJob for
>>> kamailio.service failed. See 'systemctl status kamailio.service' and
>>> 'journalctl -xn' for details.
>>>  failed!
>>>
>>>
>>> Any ideas, please?
>>>
>>>
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users at lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20180330/23959e5a/attachment.html>