[SR-Users] Automating installation

John Tuxies atuxnull at gmail.com
Thu Dec 13 19:54:58 CET 2018


here is the output of diff


On Thu, Dec 13, 2018 at 10:54 AM Daniel-Constantin Mierla <miconda at gmail.com>
wrote:

> Probably the best is to send here the diff from your current kamailio.cfg
> and the default one from kamailio v5.2.0.
>
> The default one can be downloaded from github with:
>
> cd /tmp
>
> wget
> https://raw.githubusercontent.com/kamailio/kamailio/5.2/etc/kamailio.cfg
>
> Then do:
>
> diff -u /tmp/kamailio.cfg /etc/kamailio/kamailio.cfg
>
> And send the output here. If you set a different mysql password, then edit
> the output of the diff to change it to a random value before sending it.
>
> Cheers,
> Daniel
> On 12.12.18 20:09, John Tuxies wrote:
>
> Could u tell me which ones please? All i did was to install kamailio 5.2
> from kamailio's repo for debian. Kamailio worked fine. Then i started the
> installation of Asterisk and starting to edit the cong file of kamailio kai
> boom it failed. I have no idea how to fix it.
>
> On Wednesday, December 12, 2018, Serge S. Yuriev <me at nevian.org> wrote:
>
>> Hi
>>
>> And you had failed with IF defines - perhaps deleted some of them by
>> mistake or added and not closed properly
>>
>> --
>> Wbr, Serge via mobile
>>
>> 11.12.2018, 16:09, "John Tuxies" <atuxnull at gmail.com>:
>>
>> I have gone a bit further and installed Asterisk 13 LTS from source in
>> Debian 9 64 bit. It works fine with ODBC and asterisk listens on port 5080.
>> I have installed Kamailio 5.2 from repository (deb.kamailio) and it started
>> OK for the default config.
>> When i try to insert in the Kamailio config, the Asterisk handle, it
>> fails to start. Could someone give me a hand over here to see the code
>> attached please(my kamailio.cfg)?
>>
>> here is the error:
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> *root at deb9:~# -- Unit kamailio.service has begun starting up. Dec 11
>> 15:07:32 deb9 kamailio[696]: ERROR: <core> [core/pvapi.c:903]:
>> pv_parse_spec2(): error searching pvar "uac_req" Dec 11 15:07:32 deb9
>> kamailio[696]: ERROR: <core> [core/pvapi.c:1106]: pv_parse_spec2(): wrong
>> char [m/109] in [$uac_req(method)] at [9 (5)] Dec 11 15:07:32 deb9
>> kamailio[696]: CRITICAL: <core> [core/cfg.y:3507]: yyerror_at(): parse
>> error in config file /etc/kamailio/kamailio.cfg, line 1058, column 2-17: Ca
>> n't get from cache: $uac_req(method) Dec 11 15:07:32 deb9 kamailio[696]:
>> ERROR: bad config file (1 errors) Dec 11 15:07:32 deb9 kamailio[696]:
>> WARNING: <core> [core/ppcfg.c:220]: pp_ifdef_level_check(): different
>> number of preprocessor directives: N(#!IF[N]DEF) - N(#!ENDIF)  = 1 Dec 11
>> 15:07:32 deb9 kamailio[696]: INFO: <core> [core/sctp_core.c:53]:
>> sctp_core_destroy(): SCTP API not initialized Dec 11 15:07:32 deb9
>> systemd[1]: kamailio.service: Control process exited, code=exited
>> status=255 Dec 11 15:07:32 deb9 systemd[1]: Failed to start Kamailio
>> (OpenSER) - the Open Source SIP Server. -- Subject: Unit kamailio.service
>> has failed -- Defined-By: systemd -- Support:
>> https://www.debian.org/support <https://www.debian.org/support> -- -- Unit
>> kamailio.service has failed. -- -- The result is failed. Dec 11 15:07:32
>> deb9 systemd[1]: kamailio.service: Unit entered failed state. Dec 11
>> 15:07:32 deb9 systemd[1]: kamailio.service: Failed with result 'exit-code'.
>> Dec 11 15:07:32 deb9 systemd[1]: kamailio.service: Service hold-off time
>> over, scheduling restart. Dec 11 15:07:32 deb9 systemd[1]: Stopped Kamailio
>> (OpenSER) - the Open Source SIP Server. -- Subject: Unit kamailio.service
>> has finished shutting down -- Defined-By: systemd root at deb9:~# *
>>
>>
>> On Fri, Nov 30, 2018 at 2:45 PM John Tuxies <atuxnull at gmail.com> wrote:
>>
>> Dear all,
>>
>>
>> First of all i would like to thank you for your interest in this topic.
>> I did scratch a little bit further and corrected the script. Currently i
>> stick to bash and once finished with that i will invest in different
>> techniques.
>> I came to a state where the script finishes succesfully. Asterisk
>> installed and runs OK, but i got an issue with Kamailio's service.
>> i have attached the scripts and logs, so if someone could have a look and
>> see if i am missing something. I do not expect someone to install it for
>> me, but have a look on the code and logs.
>> -File named asteriskkamailio0.sh.txt needs the .txt extension removed in
>> order to be executed
>> -File named asterisk.sql.txt needs the .txt extension removed in order to
>> be able to imported to mysql.
>> -File Installation.txt is the SSH log file of the installation part.
>> -File Debug.txt is the SSH log file for the debug after executing
>> systemctl status kamailio.service and journalctl -xe
>>
>>
>> Thanks in advance for your help.
>>
>> Friendly,
>> John
>>
>> On Fri, Nov 30, 2018 at 10:16 AM Samuel F. <samuel_is_kewl at hotmail.com>
>> wrote:
>>
>> We run Ansible with great success. We use Ansible to provision the server
>> and keep all Kamailio related code in a git-repo. Ansible has two tasks,
>> (1) to provision the server according to business security standards and
>> all sub-deps, and (2) to update the server when new code is commited to the
>> repo.
>>
>> On new code, it would then setup all dirs, restart Kamailio etc as needed.
>>
>> We use the same logic and setup for Asterisk and have been doing that in
>> production for a few years without any issues whatsoever.
>>
>> Cheers,
>> Samuel
>> ------------------------------
>> *From:* sr-users <sr-users-bounces at lists.kamailio.org> on behalf of
>> Daniel-Constantin Mierla <miconda at gmail.com>
>> *Sent:* Friday, November 30, 2018 08:26
>> *To:* Kamailio (SER) - Users Mailing List; Alex Balashov
>> *Subject:* Re: [SR-Users] Automating installation
>>
>>
>> On 29.11.18 22:53, Alex Balashov wrote:
>> > On Thu, Nov 29, 2018 at 01:50:55PM -0800, Joel Serrano wrote:
>> >
>> >> If it was me, I would handle everything with ansible, but that is just
>> >> my tool of preference.
>> > I'll add a vote for SaltStack, my preferred tool of choice.
>>
>> Did you start with it and stayed with, or you compared and found some
>> benefits vs. others like ansible, puppet, ...?
>>
>> I started with ansible and happy with it, when I looked around the
>> reasons were that python was installed anyhow by default in debian, then
>> the target system didn't need to have any server/agent app deployed
>> before.
>>
>> Cheers,
>> Daniel
>>
>> --
>> Daniel-Constantin Mierla --
>> https://nam03.safelinks.protection.outlook.com/?url=www.asipto.com&data=02%7C01%7C%7Cbddcc5fbd0df470749ef08d656954101%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636791596364449003&sdata=i%2BrWG9MKhzZ1FQgaVaj7dbyEdTeGd3xWy3Lkb2%2FcYzE%3D&reserved=0
>>
>> https://nam03.safelinks.protection.outlook.com/?url=www.twitter.com%2Fmiconda&data=02%7C01%7C%7Cbddcc5fbd0df470749ef08d656954101%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636791596364449003&sdata=fODOG0JM6gwXIneoxel2QVy5PGAmbTYFgGk68ctOPdU%3D&reserved=0
>> --
>> https://nam03.safelinks.protection.outlook.com/?url=www.linkedin.com%2Fin%2Fmiconda&data=02%7C01%7C%7Cbddcc5fbd0df470749ef08d656954101%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636791596364449003&sdata=CHA9TnvLV5CKkWJNDwntmo7w6bn%2BsB%2F6RbjpxT1%2BN4w%3D&reserved=0
>> Kamailio World Conference --
>> https://nam03.safelinks.protection.outlook.com/?url=www.kamailioworld.com&data=02%7C01%7C%7Cbddcc5fbd0df470749ef08d656954101%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636791596364449003&sdata=ac0qNl3hlv2MMSMd7t82UCLLDpPzvRD2iFmxMoxdC5M%3D&reserved=0
>> Kamailio Advanced Training, Nov 12-14, 2018, in Berlin --
>> https://nam03.safelinks.protection.outlook.com/?url=www.asipto.com&data=02%7C01%7C%7Cbddcc5fbd0df470749ef08d656954101%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636791596364449003&sdata=i%2BrWG9MKhzZ1FQgaVaj7dbyEdTeGd3xWy3Lkb2%2FcYzE%3D&reserved=0
>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>>
>> https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.kamailio.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fsr-users&data=02%7C01%7C%7Cbddcc5fbd0df470749ef08d656954101%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636791596364449003&sdata=hcYbPWDj2JTtRPI6pBXUQkdlOBgDGadM1sUVkErqLds%3D&reserved=0
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing Listsr-users at lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
> Kamailio Advanced Training -- www.asipto.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20181213/62134497/attachment.html>
-------------- next part --------------
--- /etc/kamailio/kamailio.cfg	2018-12-13 20:25:12.117585656 +0200
+++ /tmp/kamailio.cfg	2018-12-13 20:41:22.000000000 +0200
@@ -2,6 +2,7 @@
 #!define WITH_MYSQL
 #!define WITH_AUTH
 #!define WITH_USRLOCDB
+#!define WITH_ASTERISK
 #
 # Kamailio (OpenSER) SIP Server v5.2 - default configuration script
 #     - web: https://www.kamailio.org
@@ -122,8 +123,9 @@
 #!ifdef WITH_MYSQL
 # - database URL - used to connect to database server by modules such
 #       as: auth_db, acc, usrloc, a.s.o.
-#!ifndef DBURL
-#!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio"
+#!define DBURL "mysql://openser:openserrw@localhost/openser"
+#!ifdef WITH_ASTERISK
+#!define DBASTURL "mysql://asterisk:asterisk_password@localhost/asterisk"
 #!endif
 #!endif
 #!ifdef WITH_MULTIDOMAIN
@@ -176,7 +178,7 @@
 
 /* uncomment and configure the following line if you want Kamailio to
  * bind on a specific interface/port/proto (default bind on all available) */
-# listen=udp:10.0.0.10:5060
+ listen=udp:192.168.1.230:5060
 
 #!ifdef WITH_TLS
 enable_tls=yes
@@ -213,6 +215,15 @@
 voicemail.srv_port = "5060" desc "VoiceMail Port"
 #!endif
 
+
+#!ifdef WITH_ASTERISK
+asterisk.bindip = "192.168.1.230" desc "Asterisk IP Address"
+asterisk.bindport = "5080" desc "Asterisk Port"
+kamailio.bindip = "192.168.178.230" desc "Kamailio IP Address"
+kamailio.bindport = "5060" desc "Kamailio Port"
+#!endif
+
+
 ####### Modules Section ########
 
 /* set paths to location of modules */
@@ -316,7 +327,16 @@
 modparam("rr", "enable_full_lr", 0)
 # do not append from tag to the RR (no need for this script)
 modparam("rr", "append_fromtag", 0)
-
+#!ifdef WITH_ASTERISK
+modparam("rr", "append_fromtag", 1)
+#!else
+modparam("rr", "append_fromtag", 0)
+#!endif
+#!ifdef WITH_ASTERISK
+modparam("rr", "append_fromtag", 1)
+#!else
+modparam("rr", "append_fromtag", 0)
+#!endif
 # ----- registrar params -----
 modparam("registrar", "method_filtering", 1)
 /* uncomment the next line to disable parallel forking via location */
@@ -369,6 +389,17 @@
 modparam("auth_db", "password_column", "password")
 modparam("auth_db", "load_credentials", "")
 modparam("auth_db", "use_domain", MULTIDOMAIN)
+#!ifdef WITH_ASTERISK
+modparam("auth_db", "user_column", "name")
+modparam("auth_db", "password_column", "sippasswd")
+modparam("auth_db", "db_url", DBASTURL)
+modparam("auth_db", "version_table", 0)
+#!else
+modparam("auth_db", "db_url", DBURL)
+modparam("auth_db", "password_column", "password")
+modparam("auth_db", "use_domain", MULTIDOMAIN)
+#!endif
+
 
 # ----- permissions params -----
 #!ifdef WITH_IPAUTH
@@ -643,6 +674,9 @@
 	if (!save("location")) {
 		sl_reply_error();
 	}
+#!ifdef WITH_ASTERISK
+  route(REGFWD);
+#!endif
 	exit;
 }
 
@@ -664,6 +698,15 @@
 		route(SIPOUT);
 	}
 #!endif
+#!ifdef WITH_ASTERISK
+ if(is_method("INVITE") && (!route(FROMASTERISK))) {
+  # if new call from out there - send to Asterisk
+  # - non-INVITE request are routed directly by Kamailio
+  # - traffic from Asterisk is routed also directy by Kamailio
+  route(TOASTERISK);
+  exit;
+ }
+#!endif
 
 	$avp(oexten) = $rU;
 	if (!lookup("location")) {
@@ -728,6 +771,11 @@
 # IP authorization and user authentication
 route[AUTH] {
 #!ifdef WITH_AUTH
+#!ifdef WITH_ASTERISK
+ # do not auth traffic from Asterisk - trusted!
+ if(route(FROMASTERISK))
+  return;
+#!endif
 
 #!ifdef WITH_IPAUTH
 	if((!is_method("REGISTER")) && allow_source_address()) {
@@ -760,6 +808,18 @@
 		sl_send_reply("403","Not relaying");
 		exit;
 	}
+#!ifdef WITH_ASTERISK
+  if (!auth_check("$fd", "sipusers", "1")) {
+#!else
+  if (!auth_check("$fd", "subscriber", "1")) {
+#!endif
+   auth_challenge("$fd", "0");
+   exit;
+  }
+  # user authenticated - remove auth header
+  if(!is_method("REGISTER|PUBLISH"))
+   consume_credentials();
+ }
 
 #!endif
 	return;
@@ -971,3 +1031,40 @@
 	}
 #!endif
 }
+#!ifdef WITH_ASTERISK
+# Test if coming from Asterisk
+route[FROMASTERISK] {
+ if($si==$sel(cfg_get.asterisk.bindip)
+   && $sp==$sel(cfg_get.asterisk.bindport))
+  return 1;
+ return -1;
+}
+ 
+# Send to Asterisk
+route[TOASTERISK] {
+ $du = "sip:" + $sel(cfg_get.asterisk.bindip) + ":"
+   + $sel(cfg_get.asterisk.bindport);
+ route(RELAY);
+ exit;
+}
+ 
+# Forward REGISTER to Asterisk
+route[REGFWD] {
+ if(!is_method("REGISTER"))
+ {
+  return;
+ }
+ $var(rip) = $sel(cfg_get.asterisk.bindip);
+ $uac_req(method)="REGISTER";
+ $uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.asterisk.bindport);
+ $uac_req(furi)="sip:" + $au + "@" + $var(rip);
+ $uac_req(turi)="sip:" + $au + "@" + $var(rip);
+ $uac_req(hdrs)="Contact: <sip: au="" cfg_get.kamailio.bindip="" cfg_get.kamailio.bindport="" sel="">\r\n";
+ if($sel(contact.expires) != $null)
+  $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) + "\r\n";
+ else
+  $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) + "\r\n";
+ uac_req_send();
+}
+#!endif
+
-------------- next part --------------
#!KAMAILIO							#!KAMAILIO
#!define WITH_MYSQL						#!define WITH_MYSQL
#!define WITH_AUTH						#!define WITH_AUTH
#!define WITH_USRLOCDB						#!define WITH_USRLOCDB
							      >	#!define WITH_ASTERISK
#								#
# Kamailio (OpenSER) SIP Server v5.2 - default configuration 	# Kamailio (OpenSER) SIP Server v5.2 - default configuration 
#     - web: https://www.kamailio.org				#     - web: https://www.kamailio.org
#     - git: https://github.com/kamailio/kamailio		#     - git: https://github.com/kamailio/kamailio
#								#
# Direct your questions about this file to: <sr-users at lists.k	# Direct your questions about this file to: <sr-users at lists.k
#								#
# Refer to the Core CookBook at https://www.kamailio.org/wiki	# Refer to the Core CookBook at https://www.kamailio.org/wiki
# for an explanation of possible statements, functions and pa	# for an explanation of possible statements, functions and pa
#								#
# Note: the comments can be:					# Note: the comments can be:
#     - lines starting with #, but not the pre-processor dire	#     - lines starting with #, but not the pre-processor dire
#       which start with #!, like #!define, #!ifdef, #!endif,	#       which start with #!, like #!define, #!ifdef, #!endif,
#       #!subst, #!substdef, ...				#       #!subst, #!substdef, ...
#     - lines starting with //					#     - lines starting with //
#     - blocks enclosed in between /* */			#     - blocks enclosed in between /* */
#								#
# Several features can be enabled using '#!define WITH_FEATUR	# Several features can be enabled using '#!define WITH_FEATUR
#								#
# *** To run in debug mode:					# *** To run in debug mode:
#     - define WITH_DEBUG					#     - define WITH_DEBUG
#								#
# *** To enable mysql:						# *** To enable mysql:
#     - define WITH_MYSQL					#     - define WITH_MYSQL
#								#
# *** To enable authentication execute:				# *** To enable authentication execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_AUTH					#     - define WITH_AUTH
#     - add users using 'kamctl'				#     - add users using 'kamctl'
#								#
# *** To enable IP authentication execute:			# *** To enable IP authentication execute:
#     - enable mysql						#     - enable mysql
#     - enable authentication					#     - enable authentication
#     - define WITH_IPAUTH					#     - define WITH_IPAUTH
#     - add IP addresses with group id '1' to 'address' table	#     - add IP addresses with group id '1' to 'address' table
#								#
# *** To enable persistent user location execute:		# *** To enable persistent user location execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_USRLOCDB					#     - define WITH_USRLOCDB
#								#
# *** To enable presence server execute:			# *** To enable presence server execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_PRESENCE					#     - define WITH_PRESENCE
#								#
# *** To enable nat traversal execute:				# *** To enable nat traversal execute:
#     - define WITH_NAT						#     - define WITH_NAT
#     - install RTPProxy: http://www.rtpproxy.org		#     - install RTPProxy: http://www.rtpproxy.org
#     - start RTPProxy:						#     - start RTPProxy:
#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722	#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#     - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPIN	#     - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPIN
#								#
# *** To enable PSTN gateway routing execute:			# *** To enable PSTN gateway routing execute:
#     - define WITH_PSTN					#     - define WITH_PSTN
#     - set the value of pstn.gw_ip				#     - set the value of pstn.gw_ip
#     - check route[PSTN] for regexp routing condition		#     - check route[PSTN] for regexp routing condition
#								#
# *** To enable database aliases lookup execute:		# *** To enable database aliases lookup execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_ALIASDB					#     - define WITH_ALIASDB
#								#
# *** To enable speed dial lookup execute:			# *** To enable speed dial lookup execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_SPEEDDIAL					#     - define WITH_SPEEDDIAL
#								#
# *** To enable multi-domain support execute:			# *** To enable multi-domain support execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_MULTIDOMAIN					#     - define WITH_MULTIDOMAIN
#								#
# *** To enable TLS support execute:				# *** To enable TLS support execute:
#     - adjust CFGDIR/tls.cfg as needed				#     - adjust CFGDIR/tls.cfg as needed
#     - define WITH_TLS						#     - define WITH_TLS
#								#
# *** To enable XMLRPC support execute:				# *** To enable XMLRPC support execute:
#     - define WITH_XMLRPC					#     - define WITH_XMLRPC
#     - adjust route[XMLRPC] for access policy			#     - adjust route[XMLRPC] for access policy
#								#
# *** To enable anti-flood detection execute:			# *** To enable anti-flood detection execute:
#     - adjust pike and htable=>ipban settings as needed (def	#     - adjust pike and htable=>ipban settings as needed (def
#       block if more than 16 requests in 2 seconds and ban f	#       block if more than 16 requests in 2 seconds and ban f
#     - define WITH_ANTIFLOOD					#     - define WITH_ANTIFLOOD
#								#
# *** To block 3XX redirect replies execute:			# *** To block 3XX redirect replies execute:
#     - define WITH_BLOCK3XX					#     - define WITH_BLOCK3XX
#								#
# *** To block 401 and 407 authentication replies execute:	# *** To block 401 and 407 authentication replies execute:
#     - define WITH_BLOCK401407					#     - define WITH_BLOCK401407
#								#
# *** To enable VoiceMail routing execute:			# *** To enable VoiceMail routing execute:
#     - define WITH_VOICEMAIL					#     - define WITH_VOICEMAIL
#     - set the value of voicemail.srv_ip			#     - set the value of voicemail.srv_ip
#     - adjust the value of voicemail.srv_port			#     - adjust the value of voicemail.srv_port
#								#
# *** To enhance accounting execute:				# *** To enhance accounting execute:
#     - enable mysql						#     - enable mysql
#     - define WITH_ACCDB					#     - define WITH_ACCDB
#     - add following columns to database			#     - add following columns to database
#!ifdef ACCDB_COMMENT						#!ifdef ACCDB_COMMENT
  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DE	  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DE
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL	  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL
  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL defa	  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL defa
  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL D	  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL D
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DE	  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DE
  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL	  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL
  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NO	  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NO
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128)	  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128)
  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT 	  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT 
  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) N	  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) N
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NO	  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NO
  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128)	  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128)
#!endif								#!endif

####### Include Local Config If Exists #########		####### Include Local Config If Exists #########
import_file "kamailio-local.cfg"				import_file "kamailio-local.cfg"

####### Defined Values #########				####### Defined Values #########

# *** Value defines - IDs used later in config			# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL						#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modu	# - database URL - used to connect to database server by modu
#       as: auth_db, acc, usrloc, a.s.o.			#       as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL						      |	#!define DBURL "mysql://openser:openserrw@localhost/openser"
#!define DBURL "mysql://kamailio:kamailiorw@localhost/kamaili |	#!ifdef WITH_ASTERISK
							      >	#!define DBASTURL "mysql://asterisk:asterisk_password@localho
#!endif								#!endif
#!endif								#!endif
#!ifdef WITH_MULTIDOMAIN					#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters			# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1						#!define MULTIDOMAIN 1
#!else								#!else
#!define MULTIDOMAIN 0						#!define MULTIDOMAIN 0
#!endif								#!endif

# - flags							# - flags
#   FLT_ - per transaction (message) flags			#   FLT_ - per transaction (message) flags
#	FLB_ - per branch flags					#	FLB_ - per branch flags
#!define FLT_ACC 1						#!define FLT_ACC 1
#!define FLT_ACCMISSED 2					#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3					#!define FLT_ACCFAILED 3
#!define FLT_NATS 5						#!define FLT_NATS 5

#!define FLB_NATB 6						#!define FLB_NATB 6
#!define FLB_NATSIPPING 7					#!define FLB_NATSIPPING 7

####### Global Parameters #########				####### Global Parameters #########

### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR		### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG						#!ifdef WITH_DEBUG
debug=4								debug=4
log_stderror=yes						log_stderror=yes
#!else								#!else
debug=2								debug=2
log_stderror=no							log_stderror=no
#!endif								#!endif

memdbg=5							memdbg=5
memlog=5							memlog=5

log_facility=LOG_LOCAL0						log_facility=LOG_LOCAL0
log_prefix="{$mt $hdr(CSeq) $ci} "				log_prefix="{$mt $hdr(CSeq) $ci} "

/* number of SIP routing processes */				/* number of SIP routing processes */
children=8							children=8

/* uncomment the next line to disable TCP (default on) */	/* uncomment the next line to disable TCP (default on) */
# disable_tcp=yes						# disable_tcp=yes

/* uncomment the next line to disable the auto discovery of l	/* uncomment the next line to disable the auto discovery of l
 * based on reverse DNS on IPs (default on) */			 * based on reverse DNS on IPs (default on) */
# auto_aliases=no						# auto_aliases=no

/* add local domain aliases */					/* add local domain aliases */
# alias="sip.mydomain.com"					# alias="sip.mydomain.com"

/* uncomment and configure the following line if you want Kam	/* uncomment and configure the following line if you want Kam
 * bind on a specific interface/port/proto (default bind on a	 * bind on a specific interface/port/proto (default bind on a
# listen=udp:10.0.0.10:5060				      |	 listen=udp:192.168.1.230:5060

#!ifdef WITH_TLS						#!ifdef WITH_TLS
enable_tls=yes							enable_tls=yes
#!endif								#!endif

/* life time of TCP connection when there is no traffic		/* life time of TCP connection when there is no traffic
 * - a bit higher than registration expires to cope with UA b	 * - a bit higher than registration expires to cope with UA b
tcp_connection_lifetime=3605					tcp_connection_lifetime=3605

####### Custom Parameters #########				####### Custom Parameters #########

/* These parameters can be modified runtime via RPC interface	/* These parameters can be modified runtime via RPC interface
 * - see the documentation of 'cfg_rpc' module.			 * - see the documentation of 'cfg_rpc' module.
 *								 *
 * Format: group.id = value 'desc' description			 * Format: group.id = value 'desc' description
 * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */	 * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */

#!ifdef WITH_PSTN						#!ifdef WITH_PSTN
/* PSTN GW Routing						/* PSTN GW Routing
 *								 *
 * - pstn.gw_ip: valid IP or hostname as string value, exampl	 * - pstn.gw_ip: valid IP or hostname as string value, exampl
 * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"		 * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
 *								 *
 * - by default is empty to avoid misrouting */			 * - by default is empty to avoid misrouting */
pstn.gw_ip = "" desc "PSTN GW Address"				pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"				pstn.gw_port = "" desc "PSTN GW Port"
#!endif								#!endif

#!ifdef WITH_VOICEMAIL						#!ifdef WITH_VOICEMAIL
/* VoiceMail Routing on offline, busy or no answer		/* VoiceMail Routing on offline, busy or no answer
 *								 *
 * - by default Voicemail server IP is empty to avoid misrout	 * - by default Voicemail server IP is empty to avoid misrout
voicemail.srv_ip = "" desc "VoiceMail IP Address"		voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"		voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif								#!endif

							      >
							      >	#!ifdef WITH_ASTERISK
							      >	asterisk.bindip = "192.168.1.230" desc "Asterisk IP Address"
							      >	asterisk.bindport = "5080" desc "Asterisk Port"
							      >	kamailio.bindip = "192.168.178.230" desc "Kamailio IP Address
							      >	kamailio.bindport = "5060" desc "Kamailio Port"
							      >	#!endif
							      >
							      >
####### Modules Section ########				####### Modules Section ########

/* set paths to location of modules */				/* set paths to location of modules */
# mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"		# mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"

#!ifdef WITH_MYSQL						#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"					loadmodule "db_mysql.so"
#!endif								#!endif

loadmodule "jsonrpcs.so"					loadmodule "jsonrpcs.so"
loadmodule "kex.so"						loadmodule "kex.so"
loadmodule "corex.so"						loadmodule "corex.so"
loadmodule "tm.so"						loadmodule "tm.so"
loadmodule "tmx.so"						loadmodule "tmx.so"
loadmodule "sl.so"						loadmodule "sl.so"
loadmodule "rr.so"						loadmodule "rr.so"
loadmodule "pv.so"						loadmodule "pv.so"
loadmodule "maxfwd.so"						loadmodule "maxfwd.so"
loadmodule "usrloc.so"						loadmodule "usrloc.so"
loadmodule "registrar.so"					loadmodule "registrar.so"
loadmodule "textops.so"						loadmodule "textops.so"
loadmodule "siputils.so"					loadmodule "siputils.so"
loadmodule "xlog.so"						loadmodule "xlog.so"
loadmodule "sanity.so"						loadmodule "sanity.so"
loadmodule "ctl.so"						loadmodule "ctl.so"
loadmodule "cfg_rpc.so"						loadmodule "cfg_rpc.so"
loadmodule "acc.so"						loadmodule "acc.so"
loadmodule "counters.so"					loadmodule "counters.so"

#!ifdef WITH_AUTH						#!ifdef WITH_AUTH
loadmodule "auth.so"						loadmodule "auth.so"
loadmodule "auth_db.so"						loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH						#!ifdef WITH_IPAUTH
loadmodule "permissions.so"					loadmodule "permissions.so"
#!endif								#!endif
#!endif								#!endif

#!ifdef WITH_ALIASDB						#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"					loadmodule "alias_db.so"
#!endif								#!endif

#!ifdef WITH_SPEEDDIAL						#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"					loadmodule "speeddial.so"
#!endif								#!endif

#!ifdef WITH_MULTIDOMAIN					#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"						loadmodule "domain.so"
#!endif								#!endif

#!ifdef WITH_PRESENCE						#!ifdef WITH_PRESENCE
loadmodule "presence.so"					loadmodule "presence.so"
loadmodule "presence_xml.so"					loadmodule "presence_xml.so"
#!endif								#!endif

#!ifdef WITH_NAT						#!ifdef WITH_NAT
loadmodule "nathelper.so"					loadmodule "nathelper.so"
loadmodule "rtpproxy.so"					loadmodule "rtpproxy.so"
#!endif								#!endif

#!ifdef WITH_TLS						#!ifdef WITH_TLS
loadmodule "tls.so"						loadmodule "tls.so"
#!endif								#!endif

#!ifdef WITH_ANTIFLOOD						#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"						loadmodule "htable.so"
loadmodule "pike.so"						loadmodule "pike.so"
#!endif								#!endif

#!ifdef WITH_XMLRPC						#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"						loadmodule "xmlrpc.so"
#!endif								#!endif

#!ifdef WITH_DEBUG						#!ifdef WITH_DEBUG
loadmodule "debugger.so"					loadmodule "debugger.so"
#!endif								#!endif

# ----------------- setting module-specific parameters ------	# ----------------- setting module-specific parameters ------


# ----- jsonrpcs params -----					# ----- jsonrpcs params -----
modparam("jsonrpcs", "pretty_format", 1)			modparam("jsonrpcs", "pretty_format", 1)
/* set the path to RPC fifo control file */			/* set the path to RPC fifo control file */
# modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamail	# modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamail
/* set the path to RPC unix socket control file */		/* set the path to RPC unix socket control file */
# modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kam	# modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kam

# ----- ctl params -----					# ----- ctl params -----
/* set the path to RPC unix socket control file */		/* set the path to RPC unix socket control file */
# modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_	# modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_

# ----- tm params -----						# ----- tm params -----
# auto-discard branches from previous serial forking leg	# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)				modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec				# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)				modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec	# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)				modparam("tm", "fr_inv_timer", 120000)

# ----- rr params -----						# ----- rr params -----
# set next param to 1 to add value to ;lr param (helps with s	# set next param to 1 to add value to ;lr param (helps with s
modparam("rr", "enable_full_lr", 0)				modparam("rr", "enable_full_lr", 0)
# do not append from tag to the RR (no need for this script)	# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)				modparam("rr", "append_fromtag", 0)
							      |	#!ifdef WITH_ASTERISK
							      >	modparam("rr", "append_fromtag", 1)
							      >	#!else
							      >	modparam("rr", "append_fromtag", 0)
							      >	#!endif
							      >	#!ifdef WITH_ASTERISK
							      >	modparam("rr", "append_fromtag", 1)
							      >	#!else
							      >	modparam("rr", "append_fromtag", 0)
							      >	#!endif
# ----- registrar params -----					# ----- registrar params -----
modparam("registrar", "method_filtering", 1)			modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via lo	/* uncomment the next line to disable parallel forking via lo
# modparam("registrar", "append_branches", 0)			# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts	/* uncomment the next line not to allow more than 10 contacts
# modparam("registrar", "max_contacts", 10)			# modparam("registrar", "max_contacts", 10)
/* max value for expires of registrations */			/* max value for expires of registrations */
modparam("registrar", "max_expires", 3600)			modparam("registrar", "max_expires", 3600)
/* set it to 1 to enable GRUU */				/* set it to 1 to enable GRUU */
modparam("registrar", "gruu_enabled", 0)			modparam("registrar", "gruu_enabled", 0)

# ----- acc params -----					# ----- acc params -----
/* what special events should be accounted ? */			/* what special events should be accounted ? */
modparam("acc", "early_media", 0)				modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)				modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)				modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential r	/* by default ww do not adjust the direct of the sequential r
 * if you enable this parameter, be sure the enable "append_f	 * if you enable this parameter, be sure the enable "append_f
 * in "rr" module */						 * in "rr" module */
modparam("acc", "detect_direction", 0)				modparam("acc", "detect_direction", 0)
/* account triggers (flags) */					/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)				modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)		modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",					modparam("acc", "log_extra",
	"src_user=$fU;src_domain=$fd;src_ip=$si;"			"src_user=$fU;src_domain=$fd;src_ip=$si;"
	"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")			"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)	modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */					/* enhanced DB accounting */
#!ifdef WITH_ACCDB						#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)				modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)		modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)				modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",					modparam("acc", "db_extra",
	"src_user=$fU;src_domain=$fd;src_ip=$si;"			"src_user=$fU;src_domain=$fd;src_ip=$si;"
	"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")			"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif								#!endif

# ----- usrloc params -----					# ----- usrloc params -----
/* enable DB persistency for location entries */		/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB						#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)				modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)				modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)			modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif								#!endif

# ----- auth_db params -----					# ----- auth_db params -----
#!ifdef WITH_AUTH						#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)				modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)			modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")		modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")			modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)			modparam("auth_db", "use_domain", MULTIDOMAIN)
							      >	#!ifdef WITH_ASTERISK
							      >	modparam("auth_db", "user_column", "name")
							      >	modparam("auth_db", "password_column", "sippasswd")
							      >	modparam("auth_db", "db_url", DBASTURL)
							      >	modparam("auth_db", "version_table", 0)
							      >	#!else
							      >	modparam("auth_db", "db_url", DBURL)
							      >	modparam("auth_db", "password_column", "password")
							      >	modparam("auth_db", "use_domain", MULTIDOMAIN)
							      >	#!endif
							      >

# ----- permissions params -----				# ----- permissions params -----
#!ifdef WITH_IPAUTH						#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)			modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)				modparam("permissions", "db_mode", 1)
#!endif								#!endif

#!endif								#!endif

# ----- alias_db params -----					# ----- alias_db params -----
#!ifdef WITH_ALIASDB						#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)				modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)			modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif								#!endif

# ----- speeddial params -----					# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL						#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)				modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)		modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif								#!endif

# ----- domain params -----					# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN					#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)				modparam("domain", "db_url", DBURL)
/* register callback to match myself condition with domains l	/* register callback to match myself condition with domains l
modparam("domain", "register_myself", 1)			modparam("domain", "register_myself", 1)
#!endif								#!endif

#!ifdef WITH_PRESENCE						#!ifdef WITH_PRESENCE
# ----- presence params -----					# ----- presence params -----
modparam("presence", "db_url", DBURL)				modparam("presence", "db_url", DBURL)

# ----- presence_xml params -----				# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)			modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)			modparam("presence_xml", "force_active", 1)
#!endif								#!endif

#!ifdef WITH_NAT						#!ifdef WITH_NAT
# ----- rtpproxy params -----					# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")	modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")

# ----- nathelper params -----					# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)			modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)			modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)		modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger at kamailio.or	modparam("nathelper", "sipping_from", "sip:pinger at kamailio.or

# params needed for NAT traversal in other modules		# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVE	modparam("nathelper|registrar", "received_avp", "$avp(RECEIVE
modparam("usrloc", "nat_bflag", FLB_NATB)			modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif								#!endif

#!ifdef WITH_TLS						#!ifdef WITH_TLS
# ----- tls params -----					# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")		modparam("tls", "config", "/etc/kamailio/tls.cfg")
#!endif								#!endif

#!ifdef WITH_ANTIFLOOD						#!ifdef WITH_ANTIFLOOD
# ----- pike params -----					# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)			modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)			modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)				modparam("pike", "remove_latency", 4)

# ----- htable params -----					# ----- htable params -----
/* ip ban htable with autoexpire after 5 minutes */		/* ip ban htable with autoexpire after 5 minutes */
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")	modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif								#!endif

#!ifdef WITH_XMLRPC						#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----					# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");				modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")			modparam("xmlrpc", "url_match", "^/RPC")
#!endif								#!endif

#!ifdef WITH_DEBUG						#!ifdef WITH_DEBUG
# ----- debugger params -----					# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)				modparam("debugger", "cfgtrace", 1)
modparam("debugger", "log_level_name", "exec")			modparam("debugger", "log_level_name", "exec")
#!endif								#!endif

####### Routing Logic ########					####### Routing Logic ########


/* Main SIP request routing logic				/* Main SIP request routing logic
 * - processing of any incoming SIP request starts with this 	 * - processing of any incoming SIP request starts with this 
 * - note: this is the same as route { ... } */			 * - note: this is the same as route { ... } */
request_route {							request_route {

	# per request initial checks					# per request initial checks
	route(REQINIT);							route(REQINIT);

	# NAT detection							# NAT detection
	route(NATDETECT);						route(NATDETECT);

	# CANCEL processing						# CANCEL processing
	if (is_method("CANCEL")) {					if (is_method("CANCEL")) {
		if (t_check_trans()) {						if (t_check_trans()) {
			route(RELAY);							route(RELAY);
		}								}
		exit;								exit;
	}								}

	# handle retransmissions					# handle retransmissions
	if (!is_method("ACK")) {					if (!is_method("ACK")) {
		if(t_precheck_trans()) {					if(t_precheck_trans()) {
			t_check_trans();						t_check_trans();
			exit;								exit;
		}								}
		t_check_trans();						t_check_trans();
	}								}

	# handle requests within SIP dialogs				# handle requests within SIP dialogs
	route(WITHINDLG);						route(WITHINDLG);

	### only initial requests (no To tag)				### only initial requests (no To tag)

	# authentication						# authentication
	route(AUTH);							route(AUTH);

	# record routing for dialog forming requests (in case		# record routing for dialog forming requests (in case
	# - remove preloaded route headers				# - remove preloaded route headers
	remove_hf("Route");						remove_hf("Route");
	if (is_method("INVITE|SUBSCRIBE")) {				if (is_method("INVITE|SUBSCRIBE")) {
		record_route();							record_route();
	}								}

	# account only INVITEs						# account only INVITEs
	if (is_method("INVITE")) {					if (is_method("INVITE")) {
		setflag(FLT_ACC); # do accounting				setflag(FLT_ACC); # do accounting
	}								}

	# dispatch requests to foreign domains				# dispatch requests to foreign domains
	route(SIPOUT);							route(SIPOUT);

	### requests for my local domains				### requests for my local domains

	# handle presence related requests				# handle presence related requests
	route(PRESENCE);						route(PRESENCE);

	# handle registrations						# handle registrations
	route(REGISTRAR);						route(REGISTRAR);

	if ($rU==$null) {						if ($rU==$null) {
		# request with no Username in RURI				# request with no Username in RURI
		sl_send_reply("484","Address Incomplete");			sl_send_reply("484","Address Incomplete");
		exit;								exit;
	}								}

	# dispatch destinations to PSTN					# dispatch destinations to PSTN
	route(PSTN);							route(PSTN);

	# user location service						# user location service
	route(LOCATION);						route(LOCATION);
}								}

# Wrapper for relaying requests					# Wrapper for relaying requests
route[RELAY] {							route[RELAY] {

	# enable additional event routes for forwarded reques		# enable additional event routes for forwarded reques
	# - serial forking, RTP relaying handling, a.s.o.		# - serial forking, RTP relaying handling, a.s.o.
	if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {			if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
		if(!t_is_set("branch_route")) t_on_branch("MA			if(!t_is_set("branch_route")) t_on_branch("MA
	}								}
	if (is_method("INVITE|SUBSCRIBE|UPDATE")) {			if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
		if(!t_is_set("onreply_route")) t_on_reply("MA			if(!t_is_set("onreply_route")) t_on_reply("MA
	}								}
	if (is_method("INVITE")) {					if (is_method("INVITE")) {
		if(!t_is_set("failure_route")) t_on_failure("			if(!t_is_set("failure_route")) t_on_failure("
	}								}

	if (!t_relay()) {						if (!t_relay()) {
		sl_reply_error();						sl_reply_error();
	}								}
	exit;								exit;
}								}

# Per SIP request initial checks				# Per SIP request initial checks
route[REQINIT] {						route[REQINIT] {
#!ifdef WITH_ANTIFLOOD						#!ifdef WITH_ANTIFLOOD
	# flood detection from same IP and traffic ban for a 		# flood detection from same IP and traffic ban for a 
	# be sure you exclude checking trusted peers, such as		# be sure you exclude checking trusted peers, such as
	# - local host excluded (e.g., loop to self)			# - local host excluded (e.g., loop to self)
	if(src_ip!=myself) {						if(src_ip!=myself) {
		if($sht(ipban=>$si)!=$null) {					if($sht(ipban=>$si)!=$null) {
			# ip is already blocked						# ip is already blocked
			xdbg("request from blocked IP - $rm f				xdbg("request from blocked IP - $rm f
			exit;								exit;
		}								}
		if (!pike_check_req()) {					if (!pike_check_req()) {
			xlog("L_ALERT","ALERT: pike blocking 				xlog("L_ALERT","ALERT: pike blocking 
			$sht(ipban=>$si) = 1;						$sht(ipban=>$si) = 1;
			exit;								exit;
		}								}
	}								}
#!endif								#!endif
	if($ua =~ "friendly-scanner|sipcli|VaxSIPUserAgent") 		if($ua =~ "friendly-scanner|sipcli|VaxSIPUserAgent") 
		# silent drop for scanners - uncomment next l			# silent drop for scanners - uncomment next l
		# sl_send_reply("200", "OK");					# sl_send_reply("200", "OK");
		exit;								exit;
	}								}

	if (!mf_process_maxfwd_header("10")) {				if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");				sl_send_reply("483","Too Many Hops");
		exit;								exit;
	}								}

	if(is_method("OPTIONS") && uri==myself && $rU==$null)		if(is_method("OPTIONS") && uri==myself && $rU==$null)
		sl_send_reply("200","Keepalive");				sl_send_reply("200","Keepalive");
		exit;								exit;
	}								}

	if(!sanity_check("17895", "7")) {				if(!sanity_check("17895", "7")) {
		xlog("Malformed SIP message from $si:$sp\n");			xlog("Malformed SIP message from $si:$sp\n");
		exit;								exit;
	}								}
}								}

# Handle requests within SIP dialogs				# Handle requests within SIP dialogs
route[WITHINDLG] {						route[WITHINDLG] {
	if (!has_totag()) return;					if (!has_totag()) return;

	# sequential request withing a dialog should			# sequential request withing a dialog should
	# take the path determined by record-routing			# take the path determined by record-routing
	if (loose_route()) {						if (loose_route()) {
		route(DLGURI);							route(DLGURI);
		if (is_method("BYE")) {						if (is_method("BYE")) {
			setflag(FLT_ACC); # do accounting ...				setflag(FLT_ACC); # do accounting ...
			setflag(FLT_ACCFAILED); # ... even if				setflag(FLT_ACCFAILED); # ... even if
		} else if ( is_method("ACK") ) {				} else if ( is_method("ACK") ) {
			# ACK is forwarded statelessly					# ACK is forwarded statelessly
			route(NATMANAGE);						route(NATMANAGE);
		} else if ( is_method("NOTIFY") ) {				} else if ( is_method("NOTIFY") ) {
			# Add Record-Route for in-dialog NOTI				# Add Record-Route for in-dialog NOTI
			record_route();							record_route();
		}								}
		route(RELAY);							route(RELAY);
		exit;								exit;
	}								}

	if (is_method("SUBSCRIBE") && uri == myself) {			if (is_method("SUBSCRIBE") && uri == myself) {
		# in-dialog subscribe requests					# in-dialog subscribe requests
		route(PRESENCE);						route(PRESENCE);
		exit;								exit;
	}								}
	if ( is_method("ACK") ) {					if ( is_method("ACK") ) {
		if ( t_check_trans() ) {					if ( t_check_trans() ) {
			# no loose-route, but stateful ACK;				# no loose-route, but stateful ACK;
			# must be an ACK after a 487					# must be an ACK after a 487
			# or e.g. 404 from upstream server				# or e.g. 404 from upstream server
			route(RELAY);							route(RELAY);
			exit;								exit;
		} else {							} else {
			# ACK without matching transaction ..				# ACK without matching transaction ..
			exit;								exit;
		}								}
	}								}
	sl_send_reply("404","Not here");				sl_send_reply("404","Not here");
	exit;								exit;
}								}

# Handle SIP registrations					# Handle SIP registrations
route[REGISTRAR] {						route[REGISTRAR] {
	if (!is_method("REGISTER")) return;				if (!is_method("REGISTER")) return;

	if(isflagset(FLT_NATS)) {					if(isflagset(FLT_NATS)) {
		setbflag(FLB_NATB);						setbflag(FLB_NATB);
#!ifdef WITH_NATSIPPING						#!ifdef WITH_NATSIPPING
		# do SIP NAT pinging						# do SIP NAT pinging
		setbflag(FLB_NATSIPPING);					setbflag(FLB_NATSIPPING);
#!endif								#!endif
	}								}
	if (!save("location")) {					if (!save("location")) {
		sl_reply_error();						sl_reply_error();
	}								}
							      >	#!ifdef WITH_ASTERISK
							      >	  route(REGFWD);
							      >	#!endif
	exit;								exit;
}								}

# User location service						# User location service
route[LOCATION] {						route[LOCATION] {

#!ifdef WITH_SPEEDDIAL						#!ifdef WITH_SPEEDDIAL
	# search for short dialing - 2-digit extension			# search for short dialing - 2-digit extension
	if($rU=~"^[0-9][0-9]$") {					if($rU=~"^[0-9][0-9]$") {
		if(sd_lookup("speed_dial")) {					if(sd_lookup("speed_dial")) {
			route(SIPOUT);							route(SIPOUT);
		}								}
	}								}
#!endif								#!endif

#!ifdef WITH_ALIASDB						#!ifdef WITH_ALIASDB
	# search in DB-based aliases					# search in DB-based aliases
	if(alias_db_lookup("dbaliases")) {				if(alias_db_lookup("dbaliases")) {
		route(SIPOUT);							route(SIPOUT);
	}								}
#!endif								#!endif
							      >	#!ifdef WITH_ASTERISK
							      >	 if(is_method("INVITE") && (!route(FROMASTERISK))) {
							      >	  # if new call from out there - send to Asterisk
							      >	  # - non-INVITE request are routed directly by Kamailio
							      >	  # - traffic from Asterisk is routed also directy by Kamaili
							      >	  route(TOASTERISK);
							      >	  exit;
							      >	 }
							      >	#!endif

	$avp(oexten) = $rU;						$avp(oexten) = $rU;
	if (!lookup("location")) {					if (!lookup("location")) {
		$var(rc) = $rc;							$var(rc) = $rc;
		route(TOVOICEMAIL);						route(TOVOICEMAIL);
		t_newtran();							t_newtran();
		switch ($var(rc)) {						switch ($var(rc)) {
			case -1:							case -1:
			case -3:							case -3:
				send_reply("404", "Not Found"					send_reply("404", "Not Found"
				exit;								exit;
			case -2:							case -2:
				send_reply("405", "Method Not					send_reply("405", "Method Not
				exit;								exit;
		}								}
	}								}

	# when routing via usrloc, log the missed calls also		# when routing via usrloc, log the missed calls also
	if (is_method("INVITE")) {					if (is_method("INVITE")) {
		setflag(FLT_ACCMISSED);						setflag(FLT_ACCMISSED);
	}								}

	route(RELAY);							route(RELAY);
	exit;								exit;
}								}

# Presence server processing					# Presence server processing
route[PRESENCE] {						route[PRESENCE] {
	if(!is_method("PUBLISH|SUBSCRIBE")) return;			if(!is_method("PUBLISH|SUBSCRIBE")) return;

	if(is_method("SUBSCRIBE") && $hdr(Event)=="message-su		if(is_method("SUBSCRIBE") && $hdr(Event)=="message-su
		route(TOVOICEMAIL);						route(TOVOICEMAIL);
		# returns here if no voicemail server is conf			# returns here if no voicemail server is conf
		sl_send_reply("404", "No voicemail service");			sl_send_reply("404", "No voicemail service");
		exit;								exit;
	}								}

#!ifdef WITH_PRESENCE						#!ifdef WITH_PRESENCE
	if (!t_newtran()) {						if (!t_newtran()) {
		sl_reply_error();						sl_reply_error();
		exit;								exit;
	}								}

	if(is_method("PUBLISH")) {					if(is_method("PUBLISH")) {
		handle_publish();						handle_publish();
		t_release();							t_release();
	} else if(is_method("SUBSCRIBE")) {				} else if(is_method("SUBSCRIBE")) {
		handle_subscribe();						handle_subscribe();
		t_release();							t_release();
	}								}
	exit;								exit;
#!endif								#!endif

	# if presence enabled, this part will not be executed		# if presence enabled, this part will not be executed
	if (is_method("PUBLISH") || $rU==$null) {			if (is_method("PUBLISH") || $rU==$null) {
		sl_send_reply("404", "Not here");				sl_send_reply("404", "Not here");
		exit;								exit;
	}								}
	return;								return;
}								}

# IP authorization and user authentication			# IP authorization and user authentication
route[AUTH] {							route[AUTH] {
#!ifdef WITH_AUTH						#!ifdef WITH_AUTH
							      >	#!ifdef WITH_ASTERISK
							      >	 # do not auth traffic from Asterisk - trusted!
							      >	 if(route(FROMASTERISK))
							      >	  return;
							      >	#!endif

#!ifdef WITH_IPAUTH						#!ifdef WITH_IPAUTH
	if((!is_method("REGISTER")) && allow_source_address()		if((!is_method("REGISTER")) && allow_source_address()
		# source IP allowed						# source IP allowed
		return;								return;
	}								}
#!endif								#!endif

	if (is_method("REGISTER") || from_uri==myself) {		if (is_method("REGISTER") || from_uri==myself) {
		# authenticate requests						# authenticate requests
		if (!auth_check("$fd", "subscriber", "1")) {			if (!auth_check("$fd", "subscriber", "1")) {
			auth_challenge("$fd", "0");					auth_challenge("$fd", "0");
			exit;								exit;
		}								}
		# user authenticated - remove auth header			# user authenticated - remove auth header
		if(!is_method("REGISTER|PUBLISH"))				if(!is_method("REGISTER|PUBLISH"))
			consume_credentials();						consume_credentials();
	}								}
	# if caller is not local subscriber, then check if it		# if caller is not local subscriber, then check if it
	# a local destination, otherwise deny, not an open re		# a local destination, otherwise deny, not an open re
	if (from_uri!=myself && uri!=myself) {				if (from_uri!=myself && uri!=myself) {
		sl_send_reply("403","Not relaying");				sl_send_reply("403","Not relaying");
		exit;								exit;
	}								}

#!else								#!else

	# authentication not enabled - do not relay at all to		# authentication not enabled - do not relay at all to
	if(uri!=myself) {						if(uri!=myself) {
		sl_send_reply("403","Not relaying");				sl_send_reply("403","Not relaying");
		exit;								exit;
	}								}
							      >	#!ifdef WITH_ASTERISK
							      >	  if (!auth_check("$fd", "sipusers", "1")) {
							      >	#!else
							      >	  if (!auth_check("$fd", "subscriber", "1")) {
							      >	#!endif
							      >	   auth_challenge("$fd", "0");
							      >	   exit;
							      >	  }
							      >	  # user authenticated - remove auth header
							      >	  if(!is_method("REGISTER|PUBLISH"))
							      >	   consume_credentials();
							      >	 }

#!endif								#!endif
	return;								return;
}								}

# Caller NAT detection						# Caller NAT detection
route[NATDETECT] {						route[NATDETECT] {
#!ifdef WITH_NAT						#!ifdef WITH_NAT
	force_rport();							force_rport();
	if (nat_uac_test("19")) {					if (nat_uac_test("19")) {
		if (is_method("REGISTER")) {					if (is_method("REGISTER")) {
			fix_nated_register();						fix_nated_register();
		} else {							} else {
			if(is_first_hop()) {						if(is_first_hop()) {
				set_contact_alias();						set_contact_alias();
			}								}
		}								}
		setflag(FLT_NATS);						setflag(FLT_NATS);
	}								}
#!endif								#!endif
	return;								return;
}								}

# RTPProxy control and signaling updates for NAT traversal	# RTPProxy control and signaling updates for NAT traversal
route[NATMANAGE] {						route[NATMANAGE] {
#!ifdef WITH_NAT						#!ifdef WITH_NAT
	if (is_request()) {						if (is_request()) {
		if(has_totag()) {						if(has_totag()) {
			if(check_route_param("nat=yes")) {				if(check_route_param("nat=yes")) {
				setbflag(FLB_NATB);						setbflag(FLB_NATB);
			}								}
		}								}
	}								}
	if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) r		if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) r

	if(nat_uac_test("8")) {						if(nat_uac_test("8")) {
		rtpproxy_manage("co");						rtpproxy_manage("co");
	} else {							} else {
		rtpproxy_manage("cor");						rtpproxy_manage("cor");
	}								}

	if (is_request()) {						if (is_request()) {
		if (!has_totag()) {						if (!has_totag()) {
			if(t_is_branch_route()) {					if(t_is_branch_route()) {
				add_rr_param(";nat=yes");					add_rr_param(";nat=yes");
			}								}
		}								}
	}								}
	if (is_reply()) {						if (is_reply()) {
		if(isbflagset(FLB_NATB)) {					if(isbflagset(FLB_NATB)) {
			if(is_first_hop())						if(is_first_hop())
				set_contact_alias();						set_contact_alias();
		}								}
	}								}
#!endif								#!endif
	return;								return;
}								}

# URI update for dialog requests				# URI update for dialog requests
route[DLGURI] {							route[DLGURI] {
#!ifdef WITH_NAT						#!ifdef WITH_NAT
	if(!isdsturiset()) {						if(!isdsturiset()) {
		handle_ruri_alias();						handle_ruri_alias();
	}								}
#!endif								#!endif
	return;								return;
}								}

# Routing to foreign domains					# Routing to foreign domains
route[SIPOUT] {							route[SIPOUT] {
	if (uri==myself) return;					if (uri==myself) return;

	append_hf("P-hint: outbound\r\n");				append_hf("P-hint: outbound\r\n");
	route(RELAY);							route(RELAY);
	exit;								exit;
}								}

# PSTN GW routing						# PSTN GW routing
route[PSTN] {							route[PSTN] {
#!ifdef WITH_PSTN						#!ifdef WITH_PSTN
	# check if PSTN GW IP is defined				# check if PSTN GW IP is defined
	if (strempty($sel(cfg_get.pstn.gw_ip))) {			if (strempty($sel(cfg_get.pstn.gw_ip))) {
		xlog("SCRIPT: PSTN routing enabled but pstn.g			xlog("SCRIPT: PSTN routing enabled but pstn.g
		return;								return;
	}								}

	# route to PSTN dialed numbers starting with '+' or '		# route to PSTN dialed numbers starting with '+' or '
	#     (international format)					#     (international format)
	# - update the condition to match your dialing rules 		# - update the condition to match your dialing rules 
	if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return;			if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return;

	# only local users allowed to call				# only local users allowed to call
	if(from_uri!=myself) {						if(from_uri!=myself) {
		sl_send_reply("403", "Not Allowed");				sl_send_reply("403", "Not Allowed");
		exit;								exit;
	}								}

	# normalize target number for pstn gateway			# normalize target number for pstn gateway
	# - convert leading 00 to +					# - convert leading 00 to +
	if (starts_with("$rU", "00")) {					if (starts_with("$rU", "00")) {
		strip(2);							strip(2);
		prefix("+");							prefix("+");
	}								}

	if (strempty($sel(cfg_get.pstn.gw_port))) {			if (strempty($sel(cfg_get.pstn.gw_port))) {
		$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.			$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.
	} else {							} else {
		$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.			$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.
					+ $sel(cfg_get.pstn.g						+ $sel(cfg_get.pstn.g
	}								}

	route(RELAY);							route(RELAY);
	exit;								exit;
#!endif								#!endif

	return;								return;
}								}

# XMLRPC routing						# XMLRPC routing
#!ifdef WITH_XMLRPC						#!ifdef WITH_XMLRPC
route[XMLRPC] {							route[XMLRPC] {
	# allow XMLRPC from localhost					# allow XMLRPC from localhost
	if ((method=="POST" || method=="GET")				if ((method=="POST" || method=="GET")
			&& (src_ip==127.0.0.1)) {					&& (src_ip==127.0.0.1)) {
		# close connection only for xmlrpclib user ag			# close connection only for xmlrpclib user ag
		# xmlrpclib: it waits for EOF before interpre			# xmlrpclib: it waits for EOF before interpre
		if ($hdr(User-Agent) =~ "xmlrpclib")				if ($hdr(User-Agent) =~ "xmlrpclib")
			set_reply_close();						set_reply_close();
		set_reply_no_connect();						set_reply_no_connect();
		dispatch_rpc();							dispatch_rpc();
		exit;								exit;
	}								}
	send_reply("403", "Forbidden");					send_reply("403", "Forbidden");
	exit;								exit;
}								}
#!endif								#!endif

# Routing to voicemail server					# Routing to voicemail server
route[TOVOICEMAIL] {						route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL						#!ifdef WITH_VOICEMAIL
	if(!is_method("INVITE|SUBSCRIBE")) return;			if(!is_method("INVITE|SUBSCRIBE")) return;

	# check if VoiceMail server IP is defined			# check if VoiceMail server IP is defined
	if (strempty($sel(cfg_get.voicemail.srv_ip))) {			if (strempty($sel(cfg_get.voicemail.srv_ip))) {
		xlog("SCRIPT: VoiceMail routing enabled but I			xlog("SCRIPT: VoiceMail routing enabled but I
		return;								return;
	}								}
	if(is_method("INVITE")) {					if(is_method("INVITE")) {
		if($avp(oexten)==$null) return;					if($avp(oexten)==$null) return;

		$ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_			$ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_
				+ ":" + $sel(cfg_get.voicemai					+ ":" + $sel(cfg_get.voicemai
	} else {							} else {
		if($rU==$null) return;						if($rU==$null) return;

		$ru = "sip:" + $rU + "@" + $sel(cfg_get.voice			$ru = "sip:" + $rU + "@" + $sel(cfg_get.voice
				+ ":" + $sel(cfg_get.voicemai					+ ":" + $sel(cfg_get.voicemai
	}								}
	route(RELAY);							route(RELAY);
	exit;								exit;
#!endif								#!endif

	return;								return;
}								}

# Manage outgoing branches					# Manage outgoing branches
branch_route[MANAGE_BRANCH] {					branch_route[MANAGE_BRANCH] {
	xdbg("new branch [$T_branch_idx] to $ru\n");			xdbg("new branch [$T_branch_idx] to $ru\n");
	route(NATMANAGE);						route(NATMANAGE);
}								}

# Manage incoming replies					# Manage incoming replies
onreply_route[MANAGE_REPLY] {					onreply_route[MANAGE_REPLY] {
	xdbg("incoming reply\n");					xdbg("incoming reply\n");
	if(status=~"[12][0-9][0-9]") {					if(status=~"[12][0-9][0-9]") {
		route(NATMANAGE);						route(NATMANAGE);
	}								}
}								}

# Manage failure routing cases					# Manage failure routing cases
failure_route[MANAGE_FAILURE] {					failure_route[MANAGE_FAILURE] {
	route(NATMANAGE);						route(NATMANAGE);

	if (t_is_canceled()) exit;					if (t_is_canceled()) exit;

#!ifdef WITH_BLOCK3XX						#!ifdef WITH_BLOCK3XX
	# block call redirect based on 3xx replies.			# block call redirect based on 3xx replies.
	if (t_check_status("3[0-9][0-9]")) {				if (t_check_status("3[0-9][0-9]")) {
		t_reply("404","Not found");					t_reply("404","Not found");
		exit;								exit;
	}								}
#!endif								#!endif

#!ifdef WITH_BLOCK401407					#!ifdef WITH_BLOCK401407
	# block call redirect based on 401, 407 replies.		# block call redirect based on 401, 407 replies.
	if (t_check_status("401|407")) {				if (t_check_status("401|407")) {
		t_reply("404","Not found");					t_reply("404","Not found");
		exit;								exit;
	}								}
#!endif								#!endif

#!ifdef WITH_VOICEMAIL						#!ifdef WITH_VOICEMAIL
	# serial forking						# serial forking
	# - route to voicemail on busy or no answer (timeout)		# - route to voicemail on busy or no answer (timeout)
	if (t_check_status("486|408")) {				if (t_check_status("486|408")) {
		$du = $null;							$du = $null;
		route(TOVOICEMAIL);						route(TOVOICEMAIL);
		exit;								exit;
	}								}
#!endif								#!endif
}								}
							      >	#!ifdef WITH_ASTERISK
							      >	# Test if coming from Asterisk
							      >	route[FROMASTERISK] {
							      >	 if($si==$sel(cfg_get.asterisk.bindip)
							      >	   && $sp==$sel(cfg_get.asterisk.bindport))
							      >	  return 1;
							      >	 return -1;
							      >	}
							      >	 
							      >	# Send to Asterisk
							      >	route[TOASTERISK] {
							      >	 $du = "sip:" + $sel(cfg_get.asterisk.bindip) + ":"
							      >	   + $sel(cfg_get.asterisk.bindport);
							      >	 route(RELAY);
							      >	 exit;
							      >	}
							      >	 
							      >	# Forward REGISTER to Asterisk
							      >	route[REGFWD] {
							      >	 if(!is_method("REGISTER"))
							      >	 {
							      >	  return;
							      >	 }
							      >	 $var(rip) = $sel(cfg_get.asterisk.bindip);
							      >	 $uac_req(method)="REGISTER";
							      >	 $uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.aster
							      >	 $uac_req(furi)="sip:" + $au + "@" + $var(rip);
							      >	 $uac_req(turi)="sip:" + $au + "@" + $var(rip);
							      >	 $uac_req(hdrs)="Contact: <sip: au="" cfg_get.kamailio.bindip
							      >	 if($sel(contact.expires) != $null)
							      >	  $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact
							      >	 else
							      >	  $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires
							      >	 uac_req_send();
							      >	}
							      >	#!endif
							      >


More information about the sr-users mailing list