[SR-Users] Struggling with RTPProxy and RTPEngine

[Wilkins, Steve]

I was attempting to log to local1 => rtpengine --interface 172.21.1.108\!34.226.187.61 --listen-ng 127.0.0.1:12221 --dtls-passive -f -m 10000 -M 20000  -E -L 7 --log-facility=local1.  However, even after adding "local1.*                    /var/log/rtpengine.log" to /etc/rsyslog.conf and restarting rsyslog, I get no logs.  I am on Cento7.  I do this for Kamailio and logging works.

Thank you for your response,
-Steve

From: sr-users <sr-users-bounces at lists.kamailio.org> On Behalf Of Richard Fuchs
Sent: Wednesday, August 22, 2018 8:57 AM
To: sr-users at lists.kamailio.org
Subject: Re: [SR-Users] Struggling with RTPProxy and RTPEngine

It may be more helpful to post some logs from rtpengine. You should never see "Call-ID not found" from an offer.

Cheers

On 2018-08-22 08:49, Wilkins, Steve wrote:
Here is my start up =>
rtpengine --interface 111.121.22.11\!27.22.132.10 --listen-ng 127.0.0.1:12221 --dtls-passive -f -m 10000 -M 20000  -E -L 7 --log-facility=local1

My offer and answer =>
rtpengine_offer("trust-address replace-session-connection replace-origin");

From: sr-users <sr-users-bounces at lists.kamailio.org><mailto:sr-users-bounces at lists.kamailio.org> On Behalf Of Wilkins, Steve
Sent: Wednesday, August 22, 2018 8:43 AM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org><mailto:sr-users at lists.kamailio.org>
Subject: [SR-Users] Struggling with RTPProxy and RTPEngine

Hello all,

I can't seem to get either RTPProxy or RTPEngine to work correctly.  I have decided to concentrate on RTPEngine because I have read that it works the best. I am using Asterisk with Kamailio in front.  When I make calls, I see RTPEngine being hit but I continually get the error "Call-ID not found", calls work but media traffic doesn't go through RTPEngine.  I have tried many combination of the flags but I seem to always get the same error.    When I look at the tcpdump log, I see that the media offer is not on the RTPEngine port. Is there a common mis-configuration error that can cause this?

I know I can send all my logs and configurations but I really want to try and resolve this as a learning experience.

Thanks all,
-Steve




_______________________________________________

Kamailio (SER) - Users Mailing List

sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>

https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20180822/6b67bec6/attachment.html>