[SR-Users] sipML5 through kamailio

Wilkins, Steve swwilkins at mitre.org
Fri Nov 24 18:57:35 CET 2017


Hello SamyGo,

So, tls is required for wss?  I thought that when I set a listen to Kamailio-Server-IPAddress:10443 and I sent a request through that IP and Port, that Kamailio would at least see the request and attempt to do something with it.  I will go add tls and try again.  Thank you!

From: sr-users [mailto:sr-users-bounces at lists.kamailio.org] On Behalf Of SamyGo
Sent: Thursday, November 23, 2017 12:40 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: Re: [SR-Users] sipML5 through kamailio

Can you clarify the IP addressing scheme as you've mentioned. There is no TLS interface?
Advertised address for 5060 but not for WSS interface. Both listen and advertise are public IPs ?
Also,you're handling WSS requests. Do you've xlog ines in the route[xhttp:request] to view when a request lands.!

My config has this:

#!substdef "!MY_IP_ADDR!123.134.156.167!g"
#!substdef "!MY_WS_PORT!6010!g"
#!substdef "!MY_WSS_PORT!6011!g"

listen=tcp:MY_IP_ADDR:MY_WS_PORT
listen=tls:MY_IP_ADDR:MY_WSS_PORT

Then the xhttp event route:

```
event_route[xhttp:request] {
        set_reply_close();
        set_reply_no_connect();

        #Deny any HTTP requests on any port other than WS/WSS ports.
        if ($Rp != MY_WS_PORT && $Rp != MY_WSS_PORT ) {
                xlog("L_WARN", "HTTP request received on $Rp\n");
                xhttp_reply("403", "Forbidden", "", "");
                exit;
        }

        #Handle HTTP(s) onwards.
        xlog("L_INFO", "HTTP Request Received\n");
```


On Thu, Nov 23, 2017 at 12:18 PM, Wilkins, Steve <swwilkins at mitre.org<mailto:swwilkins at mitre.org>> wrote:
Hi Sammy,

First of all, thank you for taking the time to respond.

Yes, port 10443 is opened.  I have used this port before as asterisk’s WebRTC port and iptables shows it as open.  No, I can’t even get a registration using the configuration I listed.  I have an xdbg log statement right after the request_route, and I see nothing.  I do know that my xdbg logs are working though because, if I register or make a call using any sip tool, I see all my logging and everything works correctly.

-Steve

From: sr-users [mailto:sr-users-bounces at lists.kamailio.org<mailto:sr-users-bounces at lists.kamailio.org>] On Behalf Of SamyGo
Sent: Thursday, November 23, 2017 12:00 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] sipML5 through kamailio

Hi Steve,
Can you confirm that port 10443 is reachable behind the NAT to Kamailio server, validate iptables too Does your SIPml5 demo client register successfully to Kamailio? are there enough xlog lines to print out if anything lands in Kamailio.

Regards,
Sammy



On Thu, Nov 23, 2017 at 11:34 AM, Wilkins, Steve <swwilkins at mitre.org<mailto:swwilkins at mitre.org>> wrote:
Hello,

I am attempting to use sipML5 to test WebRTC.  I have not been successful in getting messages through to Kamailio though. I am running Kamailio 5.0.3 on Cento 7.

My listen’s in the kamailio configuration file are =>
listen=tcp:112.22.3.108:5060<http://112.22.3.108:5060> advertise 34.226.187.61:5060<http://34.226.187.61:5060>
listen=udp:112.22.3.108:5060<http://112.22.3.108:5060> advertise 34.226.187.61:5060<http://34.226.187.61:5060>
listen=tcp:112.22.3.108:10443<http://112.22.3.108:10443> (which I will use in the sipML5 Expert mode)

My sipML5 settings are =>
Public Identity - sip:user1 at 112.22.3.108
Realm - 112.22.3.108

Export mode setting are =>
WebSocket Server URL - wss://112.22.3.108:10443<http://112.22.3.108:10443> (I have also tried wss://112.22.3.108:10443/ws<http://112.22.3.108:10443/ws>)
SIP outbound Proxy URL - udp://112.22.3.108:5060<http://112.22.3.108:5060> (I have also left this blank)

When I make a call I see no Kamailio activity (I have logging at the start of request_route) so I am not sure where the configuration error is.  If I change the sipML5 configuration IP Address to use the asterisk IP Address, sipML5 works.  My goal is to go WebRTC Client => Kamailio => Asterisk and eventually through some sort of media proxy.

Thank you,
-Steve



_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20171124/4e7af5f7/attachment.html>


More information about the sr-users mailing list